• Journal of Mechanical Science and Technology
• /
• 제15권11호
• /
• pp.1548-1554
• /
• 2001

Flow patterns and dynamic properties of two-stage Weis-Fogh type ship propulsion mechanism are studied by a discrete vortex method. To study mutual interference between two wings, two cases are con sidered - wing motions with the same and reverse phases. The predicted flow patterns correspond to the available flow visualization results. Time histories of thrust and drag coefficients are also calculated, and the interference between the two wings are numerically clarified.

• 조명전기설비학회논문지
• /
• 제15권6호
• /
• pp.49-57
• /
• 2001

본 논문에서는 single-stage, two-stage 두가지 역률보상(PFC)기법을 기존의 능동 클램프 플라이백 컨버터에 적용하여 역률개선을 하였다. 삽입된 플라이백 컨버터의 능동클램프회로가 주스위치와 보조스위치의 영전압스위칭(ZVS)을 구현하며, 스위칭 손실을 줄임으로써 고효율을 얻을 수 있고, 높은 주파수에서의 스위칭이 가능하다. 하지만 일반적으로 사용되는 다이오드정류기, 평활용커패시터에 의한 낮은 역률의 문제점이 남아있다. 본 논문에서는 300[W급] 능동 클램프 ZVS 플라이백 컨버터를 설계하여 single-stage two-stage방식을 적용, 입력역률개선을 시뮬레이션과 실험에 의해 입증하고자 한다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제22권3호
• /
• pp.371-380
• /
• 1998

The flow patterns and dynamic properties of ship's propulsion mechanism of two-stage Weis-Fogh type are studied by the discrete vortex method. In order to study the effects of the interaction of the two wings two cases of the phase differences of the wing's motion are considered the same phase and the reverse phase. The flow patterns by simulations correspond to the photographs obtained by flow visualization and flowfield of the propulsion mechanism which is unsteady and complex is clearly visualized by numerical simulations. The time histories of the thrust an the drag coefficients on the wings are also calculated and the effects of the interaction of the two wings are numerically clarified.

• International Journal of Contents
• /
• 제11권4호
• /
• pp.56-69
• /
• 2015

This paper proposes an efficient image encryption scheme based on quintuple encryption using two chaotic maps. The encryption process is realized with quintuple encryption by calling the encrypt(E) and decrypt(D) functions five times with five different keys in the form EDEEE. The decryption process is accomplished in the reverse direction by invoking the encrypt and decrypt functions in the form DDDED. The keys for the quintuple encryption/decryption processes are generated by using a Tent map. The chaotic values for the encrypt/decrypt operations are generated by using a Gumowski-Mira map. The encrypt function E is composed of three stages: permutation, pixel value rotation and diffusion. The permutation stage scrambles all the rows and columns to chaotically generated positions. This stage reduces the correlation radically among the neighboring pixels. The pixel value rotation stage circularly rotates all the pixels either left or right, and the amount of rotation is based on chaotic values. The last stage performs the diffusion four times by scanning the image in four different directions: Horizontally, Vertically, Principal diagonally and Secondary diagonally. Each of the four diffusion steps performs the diffusion in two directions (forward and backward) with two previously diffused pixels and two chaotic values. This stage ensures the resistance against the differential attacks. The security and performance of the proposed method is investigated thoroughly by using key space, statistical, differential, entropy and performance analysis. The experimental results confirm that the proposed scheme is computationally fast with security intact.

• 대한기계학회논문집B
• /
• 제25권10호
• /
• pp.1281-1292
• /
• 2001

Experiments were done for the comparison of performance and flow characteristics between a two -stage axial flow fan and a counter-rotating axial flow fan. Each stage of the two -stage axial flow fan used fur the present study has an eight bladed rotor and thirteen slater blades. The front and the rear rotor of the counter - rotating axial flow fan have eight blades each and are driven by coaxial counter ro latins shafts through a gearbox located between the rear rotor and the electric motor. Both of the two axial fan configurations have identical rotor blades and the same operating condition fur the one -to-one comparison of the two. Performance curves of the two configurations were obtained and compared by varying the blade pitch angles and axial gaps between the blade rows. The fan characteristic curves were obtained following the Korean Standard Testing Methods for Turbo Fans and Blowers (KS B 6311). The fa n flow characteristics were measured using a five-hole probe by a non-nulling method. The velocity profiles between the hub and tip of the fans were measured and analyzed at the particular operating condition s of peak efficiency, minimum and maximum pressure coefficients. The peak efficiency of the counter-rotating axial fan was improved about 2% respectively, compared with the two stage axial fan. At the minimum pressure coefficient point of the two stage axial fan, the fan inlet flow patterns show that axial velocity highly decreased in the vicinity of the blade tip region. Also, the reverse flow took place at the blade tip.

• 상하수도학회지
• /
• 제30권3호
• /
• pp.271-278
• /
• 2016

Recently, reverse osmosis (RO) is the most common process for seawater desalination. A common problem in both RO and thermal processes is the high energy requirements for seawater desalination. The one energy saving method when utilizing the osmotic power is utilizing pressure retarded osmosis (PRO) process. The PRO process can be used to operate hydro turbines for electrical power production or can be used directly to supplement the energy required for RO desalination system. This study was carried out to evaluate the performance of both single-stage PRO process and two-stage PRO process using RO concentrate for a draw solution and RO permeate for a feed solution. The major results, were found that increase of the draw and feed solution flowrate lead to increase of the production of power density and water permeate. Also, comparison between CDCF and CDDF configuration showed that the CDDF was better than CDCF for stable operation of PRO process. In addition, power density of two-stage PRO was lower than the one of single-stage. However, net power of two-stage PRO was higher than the one of single-stage PRO.

• 대한토목학회논문집
• /
• 제36권6호
• /
• pp.991-998
• /
• 2016

초기평형상태를 만족하는 간략해석법(Jung et al., 2015)의 무응력길이를 이용하여 사장교의 임의 시공단계를 직접적으로 모사할 수 있는 무응력길이 기반의 시공단계 해석법을 제시하고, 이 방법의 효용성과 정확성을 보이고자 한다. MIDAS해석 시 unknown load factor기능을 이용한 초기형상해석과 lack of fit force기능을 이용한 순방향해석을 실시하는데 반하여 ULM (unstrained length method)해석법은 무응력길이만 알고 있으면 중간단계를 거치지 않고 직접적으로 특정중간단계를 해석할 수 있다. 2차원 인천대교모델을 구축하고 ULM과 MIDAS를 각각 적용하여 시공단계해석을 수행하고, 수치예제를 통하여 두 해석결과를 분석한 결과, 완공계의 주탑, 주거더의 길이 차이로 인한 오차를 제외하면 비교적 서로 일치하는 결과를 보였다. 아울러, 포장무게와 카운터웨이트를 역으로 재하하여 폐합해석을 수행하고, 결과비교를 통하여 두 해석결과의 타당성을 보였다.

• 식물조직배양학회지
• /
• 제27권4호
• /
• pp.259-268
• /
• 2000

Senescence is a sequence of biochemical and physiological events that lead to death of a cell, organ, or whole organism. Senescence is now clearly regarded as a genetically determined and evolutionarilly acquired developmental process comprising the final stage of development. However, in spite of the biological and practical importance, genetic mechanism of senescence has been very limited. Through forward and reverse genetic approaches, we are trying to reveal the molecular and genetic mechanism of senescence in plants, employing leaf organs of Arabidopsis as a model system. Using forward genetic approach, we have initially isolated several delayed senescence mutants either from T-DNA insertional lines or chemical-mutagenized lines. In the case of ore 4 and ore 9 mutants, the mutated genes were identified. The recent progress on characterization of mutants and identification of the mutated genes will be reported. We are also screening mutations from other various sources of mutant pools, such as activation tagging lines and promoter trap lines. Two dominant senescence-delayed mutants were isolated from the activation tagging pool. Cloning of the genes responsible for this phenotype is in progress. For reverse genetic approach, the genes that induced during leaf senescence were first isolated by differential screening method. We are currently using PCR-based suppression subtractive hybridization, designed to enrich a cDNA library for rare differentially expressed transcripts. Using this method, we have identified over 35 new sequences that are upregulated at leaf senescence stage. We are investigating the function of these novel genes by systemically generating antisense lines.

• Journal of Microbiology and Biotechnology
• /
• 제11권2호
• /
• pp.204-210
• /
• 2001

Paclitaxel can be produced in high yield and with a high degree of purify from plant cell cultures of Taxus chinensis. The complete purification method was systematically established and described. This method was an efficient procedure for the purification of paclitaxel from crude paclitaxel, consisting or reverse-phase chromatography, followed by a normal-phase chromatography. The two-stage HPLC purification scheme serves as an effective and economical approach for resolving paclitaxel from complex mixtures of taxoids, with high purify (>99%) and low impurities (<0.1%). The process is readily scalable to a pilot plant and eventually to a production environment where multikilogram quantities of material are expected to be produced. The process has been optimized to minimize solvent usage, complexity, and operating costs.

• 디자인학연구
• /
• 제17권1호
• /
• pp.241-252
• /
• 2004

CAD는 이미 디자인 분야에서도 중요하게 사용되는 도구로 동시 공학적 프로세스 상에서 전통적인 디자인 방법은 점점 사라져 가고 있다. 하지만, 리버스 엔지니어링(Reverse Engineering) 방식의 CAD 도구는 디자이너들의 작업을 위해 사용하는 도구로는 아직 많은 문제점들을 가지고 있다. 특히 디자인 프로세스 초기 단계의 직관적인 작업의 특성으로 인해 디자이너들이 기존의 CAD 도구들을 이 단계에서 적용하기는 거의 불가능하다. 최근 이러한 정성적인 문제들에 대해 구체적으로 접근하려는 연구들이 소프트웨어 뿐 아니라 하드웨어적 측면에서도 이루어지고 있다. 이 글에서는 디자인 프로세스 상에서 사용되는 기존의 3D CAD 도구의 문제점들과 최근 연구되고 있는 새로운 인터페이스 접근 방법들에 대해 알아보았다. 또한 디자이너들을 위한 CAD 개발을 위한 가이드라인을 제시하고 이를 통해 유비쿼터스 컴퓨팅 환경에서 효율적으로 사용할 수 있는 디자인 도구를 개발하기 위한 방안을 제시하였다.