• 전기화학회지
• /
• 제13권4호
• /
• pp.277-282
• /
• 2010

자동차용 고분자전해질 연료전지의 열화는 시동 또는 정지 시에 'reverse-current condition'이라 불리는 현상에 의해 촉진된다. 연료전지 자동차의 운전 종료 후 장시간동안 주차를 해 두면, 대기 중의 공기가 스택 내로 서서히 유입되어 시간이 경과함에 따라 산소분압이 점차 높아져 궁극적으로는 연료극과 공기극의 유로가 모두 공기로 충진된다. 이때 재시동하면서 연료극으로 수소가 공급되면, 연료극 유로 내에 수소와 공기가 공존하게 되고, 연료극에 공기가 존재하는 부위의 공기극에 1.4 V 이상의 높은 전압이 발생하는데, 이를 reverse-current condition 이라고 하며 공기극의 탄소담지체와 백금 촉매 산화의 원인으로 작용한다. 본 연구에서는 재시동시 스택 내에 존재하는 산소의 농도에 따른 열화 현상을 규명하고자 하였다.

• 대한안전경영과학회지
• /
• 제10권1호
• /
• pp.129-137
• /
• 2008

The studies on the logistics has been mainly centered on the logistics information system and logistics performance on the supply chain for the enterprise's profit making. For sustainable development, it's being required the construction of recycling-oriented system, and it's also necessary to construct the efficient system not only in forward but in reverse channel. In addition, it's required to construct information system for supporting reverse logistics smoothly. In this study of manufacturing enterprises, recognition on the environmental problems is set as the adaptation degree to the national environmental regulations and enterprise's concern to the environmental logistics, and it presents the direction through analyzing the effects of such environmental logistics recognition on reverse logistics information system and performance. In order to achieve these aims, it was performed through combining philological and positive studies.

• 전자공학회논문지S
• /
• 제34S권7호
• /
• pp.19-27
• /
• 1997

This paper presents the performance analysis of MC-CDMA system in reverse links acquired through the computer simulation. For channel estimation which is essential component of mobile communications, a modified alpha algorithm is proposed to estimate the channel sate for MC-CDMA system. In order to update the channel estimator of each subchannel, the modified algorithm uses the final hard-decision value in the receiver.

• 한국통신학회논문지
• /
• 제28권8B호
• /
• pp.674-682
• /
• 2003

This paper presents the studies on wireless channel modeling and reverse link synchronization of CATV. This paper analyzes multi-path fading channel to the cause of signal distortion in the wireless communication environment. We represent the microwave link characteristics according to the channel model. Multi-path channel can affect fading.

• 대한안전경영과학회지
• /
• 제8권3호
• /
• pp.125-141
• /
• 2006

If do not become whole optimization because enterprise's individual enterprise internal determinate improvement effort is associated with activity in enterprise SCM, competitive power can not but be extremely limited the result. Therefore, to spur in hidden cost's discovery and logistics' optimization is actuality. In this paper, as long as it is by logistics cost except empty driving if reverse logistics happens in distribution channel progressing, logistics reverse logistics' hidden cost through model that do minimization profit of logistics to look for plan that can do maximization try. Finally, is based on dual of distribution cost and profit of logistics and reverse logistics and achieves Pull, optimal system modeling that use Push system and gropes method of effective logistics cost.

• 한국전자파학회논문지
• /
• 제9권2호
• /
• pp.131-140
• /
• 1998

이동환경의 CDMA 통신 시스템에서 주요한 문제점으로는 다중접속간섭과 페이딩에 의한 빠른 채널 변동을 들 수 있다. 최근에는 CDMA 역방향 링크에서 다중접속간섭을 제거하기 위해 적응 선형 MMSE 수신기의 적용에 대한 관심이 증가하고 있다.본 논문에서는 각 사용자의 선호가 독립된 레일리 페이딩의 영향을 받는 상황에서 확산 부호로 긴주기 코드블 사용하는 경우에 적용이 가능한 변형된 적응 선형 MMSE 수신기 구조를 제안하고 있다. 여기서는 긴주가 코드의 사용에 따른 인근 심볼간의 확산 부호 패턴의 변동에 대응하도록 독립된 다단 탭계수벡터를 가지는 구조를 사용하였다. 이 경우 벡터의 올바른 수렴을 위해 보다 정확한 위상과 진폭 변화의 추정이 요구된다. 이 문제를 해결하기 위해 본 논문에서는 CDMA 역방향 링크에서 저전력 파일렛 채널을 이용 하여 진폭, 위상과 같은 채널의 파라마터를 추정하는 동기식 CDMA 구조를 사용하였다.

• International Journal of Computer Science & Network Security
• /
• 제23권6호
• /
• pp.27-34
• /
• 2023

This paper proposed an Inter-Carrier-Interference (ICI) Canceling Orthogonal Frequency Division Multiplexing (OFDM) receiver for 5G mobile system to support 500 km/h linear motor high speed terrestrial transportation service. A receiver in such high-speed train sees the transmission channel which is composed of multiple Doppler-shifted propagation paths. Then, a loss of sub-carrier orthogonality due to Doppler-spread channels causes ICI. The ICI Canceler is realized by the following three steps. First, using the Demodulation Reference Symbol (DMRS) pilot signals, it analyzes three parameters such as attenuation, relative delay, and Doppler-shift of each multi-path component. Secondly, based on the sets of three parameters, Channel Transfer Function (CTF) of sender sub-carrier number 𝒏 to receiver sub-carrier number 𝒍 is generated. In case of 𝒏≠𝒍, the CTF corresponds to ICI factor. Thirdly, since ICI factor is obtained, by applying ICI reverse operation by Multi-Tap Equalizer, ICI canceling can be realized. ICI canceling performance has been simulated assuming severe channel condition such as 500 km/h, 2 path reverse Doppler Shift for QPSK, 16QAM, 64QAM and 256QAM modulations. In particular, for modulation schemes below 16QAM, we confirmed that the difference between BER in a 2 path reverse Doppler shift environment and stationary environment at a moving speed of 500 km/h was very small when the number of taps in the multi-tap equalizer was set to 31 taps or more. We also confirmed that the BER performance in high-speed mobile communications for multi-level modulation schemes above 64QAM is dramatically improved by the use of a multi-tap equalizer.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.344-345
• /
• 2012

The Gate-Induced-Drain-Leakage (GIDL) current with channel doping and width dependence are characterized. The GIDL currents are found to increase in MOSFETs with higher channel doping levels and the observed GIDL current is generated by the band-to-band-tunneling (BTBT) of electron through the reverse-biased channel-to-drain p-n junction. A BTBT model is used to fit the measured GIDL currents under different channel-doping levels. Good agreement is obtained between the modeled results and experimental data. The increase of the GIDL current at narrower widths in mainly caused by the stronger gate field at the edge of the shallow trench isolation (STI). As channel width decreases, a larger portion of the GIDL current is generated at the channel-isolation edge. Therefore, the stronger gate field at the channel-isolation edge causes the total unit-width GIDL current to increases for narrow-width devices.

• 한국정밀공학회지
• /
• 제19권6호
• /
• pp.160-165
• /
• 2002

A study on digital processes of injection mold in reverse engineering are presented. Reverse engineering is useful fur several cases, where user has no geometry information of object. Laser scanner is used to obtaining 3D coordinates of object. Sequences to process cloud data are described; sampling to reduce number of points, sorting to adjust the point order, and fitting to curve and surface, and so on. Split slide structure of mold is used fur undercut part and high viscosity material. Flow of injection molding are analysed to correct cooling channel and simulate molding conditions. NC tool paths are generated to carve core and cavity. The processes are performed in digital data for reduction of lead time and consecutive geometry data.

• 전자공학회논문지A
• /
• 제33A권5호
• /
• pp.10-23
• /
• 1996

In this paper, the reverse link performance evaluation with synchronous CDMA is analyzed in the PCS system, which is the schem based on proposed method of KMT-PCS to increase the capacitance of cellular CDMA system. We make the baseband system model of CDMA reverse link, and then analyze system performance and subsystem techniques considering effect of channel and power control that are improtant factor influencing system performance in the PCS system. Based on this result, the paper presents primary technique analyses required at synchronous reverse link proposed by the KMT, which compose of initial synchronization range in initial synchronization step and control signal period in the synchronization maintenance step.