• Clinical and Experimental Reproductive Medicine
• /
• 제20권1호
• /
• pp.79-85
• /
• 1993

Five hundred and fory-four women were provided government funded sterilization reversal services with technique of microsurgery at 15 reversal institutions designated by the Korean Association for Voluntary Sterilization since the inception of Female Reversal Program in 1981. A large majority of reasons for requesting reversal surgery was a loss of children, comprising 87.3%, and the mean interval between sterilization and reversal was 33.6 months. Two hundred and ninty-one of 418 women who were post-operatively followed up with the length of 11 months to 11 years, have experienced term dilivery or ,intra-uterine pregnancy, represented 69.6%. Eight cases have experienced ectopic pregnancy and 9 cases spontaneous abortion. The largest number of reversal clients were sterilized by the laparoscopic unipolar coagulation technique and the next largest group was sterilized by the laparoscopic banding technique, representing 59.8% and 28.9% respectively. The highest pregnancy rate, 80.9%, was shown in clients who had undergone laparoscopic banding technique while the lowest, 61.8%, was the group of laparoscopic bipolar coagulation. The most common site of the anastomosis was isthmic-ampullary portion and the next was isthmic-isthmic portion. The highest success rate, 77.8 %, was marked in the isthmic-isthmic anastomosis and the lowest was in the ampullary-ampullary anastomosis, representing 50.0%. A more than 60% of the clients became pregnant within 6 months of their reversal surgery, with the shortest interval being 1 month, the longest 39 months, and the mean 7.6 months. A large majority of the successful cases were pregnancy within 1 year of their reversal surgery, representing 82.1 %. The higher rate of pregnancy, 73.5%, was in the clients undergone reversal surgery within 36 months of their sterilization and the lower pregnancy rate, 64.1 %, was in the clients undergone reversal surgery longer than 37 months of their sterilization.

• 비파괴검사학회지
• /
• 제26권3호
• /
• pp.190-197
• /
• 2006

For enhancement of flaw detactability using array transducers, focusing of ultrasonic waves on a target in an inhomogeneous medium or through a complex geometry is important. But focusing can be strongly degraded by geometrical distortion of field radiated by the array transducers or by sound speed fluctuations in the propagating medium. In recent years, the time reversal technique has been proposed. Thus, in this paper, we describe the basic principal of the time reversal technique for focusing. Then, the implementation results of the time reversal technique for ultrasonic inspections using bulk waves and guided waves generated by array transducers are presented.

• 대한전자공학회논문지TC
• /
• 제48권5호
• /
• pp.33-39
• /
• 2011

두명의 사용자를 위한 무선 통신에서 심볼 간 간섭 및 다중 접속 간섭을 최소화하는 유동적인 전송률 back-off 적용 지연 time reversal (TR) 기법의 성능을 평가하였다. 지연 TR 기법의 성능을 기존 full-rate TR과 full back-off TR의 성능과 비교하였으며, guard interval이 1보다 큰 경우 비트오차율 측면에서 지연 TR 기법의 성능이 full-rate TR이나 full back-off TR보다 우수함을 확인하였다.

• 한국산업정보학회논문지
• /
• 제27권5호
• /
• pp.25-36
• /
• 2022

본 논문은 단일 반송파 변조를 위한 공간 주파수 블록 코드에서의 랜덤 부호 반전 기술을 제안한다. 종래의 시공간 그리고 공간 주파수 블록 코드는 전파 환경이 공개되어 있으므로 심각한 전파 탈취 문제를 극복해야 한다. 이러한 전파 공개 문제를 피하기 위해, 시공간 블록 코드를 위한 랜덤 코드 데이터 보호 방법이 제안되어 있지만, 이 알고리즘은 직교 주파수 분할 다중화 블록별로 채널 결합을 바꿀 수 있는데, 이와 같은 종류의 느린 스위칭은 근처의 수신기들이 전송된 데이터를 검출할 확률을 증가시킨다. 이 논문은 데이터 심볼 기반의 빠른 스위칭 알고리즘 즉, 단일 반송파 변조를 위한 공간 주파수 블록 코드에서의 랜덤 부호 반전 기술을 제안한다. 모의실험 결과는 제안하는 알고리즘이 랜덤 부호 반전 타이밍 시퀀스를 모르는 수신기의 성능과 비교하여 우수한 성능을 보유하고 있다는 것을 나타내었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.452-457
• /
• 2000

The object of this study is to develop a reliable FEM simulation technique for the analysis of can making process using PAM-STAMP software. The processes consist of doming and necking in addition to drawing, redrawing. After body making process, this study analyzed the stability for internal pressure by simulating buckling test. Through these technique, we estimated the dome reversal pressure of steel D&I Can for various can profile and process conditions. From this study, we found the cause and mechanism of wrinkling during necking process. This mechanism is largely affected by can wall thickness and the clearance between knock out punch and necking die. The dome reversal pressure improves with increasing dome depth. These results validate the usefulness of the developed simulation technique for the analysis of body making process and optimization of the dome profile.

• 한국정밀공학회지
• /
• 제27권6호
• /
• pp.64-74
• /
• 2010

This paper proposes a new TR-based baseline-free SHM technique in which the time-reversal (TR) property of the guided Lamb waves is utilized. The new TR-based SHM technique has two distinct features when compared with the other TR-based SHM techniques: (1) The backward TR process commonly conducted by the measurement is replaced by the computation-based process; (2) In place of the comparison method, the TOF information of the damage signal extracted from the reconstructed signal is used for the damage diagnosis in conjunction with the imaging method which enables us to represent the damage as an image. The proposed TR-based SHM technique is then validated through the damage diagnosis experiment for an aluminum plate with a damage at different locations.

• 반도체디스플레이기술학회지
• /
• 제6권4호
• /
• pp.23-27
• /
• 2007

Rotary stages in semiconductor, display industry and many other fields require challenging accuracy to perform their functions properly. Especially, Axis of rotation error on rotary system is significant; such as the spindle error motion of the aligner, wire bonder and inspector machine which result in the poor quality products. To evaluate and improve the performance of such precision rotary stage, undesired movements on the other 5 degrees of freedom of the rotary stage must be measured and analyzed. In this paper, we have measured the three translations and two tilt motions of the worm gear type spindle with high precision capacitive sensors. To obtain the radial error motion, we have used Donaldson's reversal technique. And the axial components of the spindle tilt error motion can be obtained accurately from the axial direction outputs of sensors by Estler face motion reversal technique. Further more we have designed and developed the sensor mounting jig with standard cylinder for reversal method.

• 한국추진공학회지
• /
• 제13권2호
• /
• pp.9-16
• /
• 2009

본 연구는 이종 접착 재질의 접착 계면에서 미접착 결함을 검출하기 위한 새로운 시험 기법을 개발하기 위함이다. 접착 계면과 미접착 계면에서의 초음파 전달 현상을 이론적으로 해석하여 초음파 신호를 모델링하였고, 이론적 분석에 기초하여 미접착 계면에서의 위상 반전 현상을 이용한 검사 방법을 FRP/고무 시편에 적용하였다. 정량적으로 결함의 최소 검출 능력을 평가하기 위하여 알루미늄/고무시편에 평저공을 가공하여 제작하였고 일반적으로 사용하고 있는 펄스에코반사법과 새로운 시험 기법인 위상반전법을 상호 비교하였으며 이론적으로 예측한 초음파 신호와 실험에서 얻은 초음파 신호를 근거로 위상반전법으로 미접착 결함을 검출할 수 있다고 판단하였다.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제53권12호
• /
• pp.700-708
• /
• 2004

Flux-reversal machine (FRM) is a new doubly-salient stator-permanent magnet (PM) machine with flux linkage reversal in the stator concentrated windings. It can operate in both motoring and generating modes. In this paper, a novel design technique to improve the performance of FRM is proposed. Proposed techniques have a new stator winding and a magnet arrangement method. The stator and rotor shape with a concave type and a flux barrier are also proposed. According to the experimental results, it is shown that the proposed FRM have an improved performance.

• 비파괴검사학회지
• /
• 제32권4호
• /
• pp.355-361
• /
• 2012

This paper presents an experimental study on the detection and location of nonlinear scattering source due to the presence of fatigue crack in a laboratory specimen. The proposed technique is based on a combination of nonlinear elastic wave spectroscopy(NEWS) and time reversal(TR) focusing approach. In order to focus on the nonlinear scattering position due to the fatigue crack, we employed only one transmitting transducer and one receiving transducer, taking advantage of long duration of reception signal that includes multiple linear scattering such as mode conversion and boundary reflections. NEWS technique was then used as a pre-treatment of TR for spatial focusing of reemitted second harmonic signal. The robustness of this approach was demonstrated on a cracked specimen and the nonlinear TR focusing behavior is observed on the crack interface from which the second harmonic signal was originated.