• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 봄 학술발표회 논문집
• /
• pp.411-416
• /
• 2000

The behavior of high strength reinforced concrete columns subjected to uniaxal reversal loading and biaxial reversal circle path loading was investigated. Four full scale test specimens were tested. All specimens were adopted cantilever type, in order that the critical region is to locate only at the bottom of column. The parameters studied were transverse reinforcement ratio, uniaxial lateral loading and biaxial lateral loading. The damage features of columns by the biaxial loading are different from those of the uniaxial loading, However, the maximum strength and the draft angle at maximum strength were almost the same under uniaxial and biaxial loading. The transverse reinforcement under biaxial loading was very effective for increasing ductility of specimens.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2003년도 봄 학술발표회 논문집
• /
• pp.77-84
• /
• 2003

In this paper, the refined plastic-hinge analysis accounting for the effect of strain reversal caused by non-proportional loading is developed. This analysis accounts for material and geometric nonlinearities of the structural system and its component members. Moreover, the problem, conventional refined plastic-hinge analyses have underestimated the strength of structures subjected to non-proportional loading, is overcome. The modified stiffness degradation model approximating the effect of strain reversal is discussed in detail. The proposed analysis is verified by the comparison of the finite element analysis. A case study shows that the effect of strain reversal is a very crucial element to be considered in second-order plastic-hinge analysis. The proposed analysis is shown to be an efficient, reliable tool ready to be implemented into design practice.

• Structural Engineering and Mechanics
• /
• 제24권3호
• /
• pp.307-321
• /
• 2006

This paper is concerned with the behaviour of steel and concrete composite joints subjected to reversal of loading. Three cruciform composite joint specimens and one bare steel joint specimen were tested so that one side of the beam-to-column connection was under negative moment and another side under positive moment. The steelwork beam-to-column connections were made of bolted end plate with an extended haunch section. Composite slabs employing metal decking were used for all the composite joint specimens. The moment-rotation relationships for the joints were obtained experimentally. Details of the experimental observations and results were reported.

• 한국지반공학회논문집
• /
• 제15권4호
• /
• pp.3-17
• /
• 1999

대응력반전시 모래의 거동을 연구하기 위하여 여러 가지 응력경로에 따른 비틀림전단시험이 수행되었다. 응력경로는 토르크의 작용방향에 따라 시계방향과 반시계방향으로 구분할 수 있으며 대응력반전을 포함하는 응력경로에 대한 소성변형률증분의 방향이 응력상태 및 응력증분의 방향과 비교된다. 이들 시험 결과로부터, St, Venant의 원리를 이용한 등방경화이론은 최초재하와 파괴점 부근에서 소성변형률증분의 방향이 응력의 방향과 일치하는 좋은 결과를 나타내었으나 응력반전에 의한 감하과 재재하 부분에서는 차이가 있는 것으로 나타났다.

• Structural Engineering and Mechanics
• /
• 제46권6호
• /
• pp.809-825
• /
• 2013

In the present study, in reinforced concrete structures, beam-column connections are one of the most critical regions in areas with seismic susceptibility. Proper anchorage of reinforcement is vital to enhance the performance of beam-column joints. Congestion of reinforcement and construction difficulties are reported frequently while using conventional reinforcement detailing in beam-column joints of reinforced concrete structures. An effort has been made to study and evaluate the performance of beam-column joints with joint detailing as per ACI-352 (mechanical anchorage), ACI-318 (conventional hooks bent) and IS-456(full anchorage conventional hooks bent) along with confinement as per IS-13920 and without confinement. Apart from finding solutions for these problems, significant improvements in seismic performance, ductility and strength were observed while using mechanical anchorage in combination with X-cross bars for less seismic prone areas and X-cross bar plus hair clip joint reinforcement for higher seismic prone areas. To evaluate the performances of these types of anchorages and joint details, the specimens were assembled into four groups, each group having three specimens have been tested under reversal loading and the results are presented in this paper.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2004년도 춘계 학술발표대회 개요집
• /
• pp.152-153
• /
• 2004

A pressure reversal is where ERW pipes fail at an applied pressure lower than one experienced previously. The susceptibility to pressure reversals of ERW joints has been investigated by varying heat input in the range of 230-268㎾ power and seam annealing temperature of 850-970$^{\circ}C$. The application of repeated loading to notched three point bend specimens was used in this study. There was no occurrence of reversals in all the condition investigated. Furthermore, the bond line ductility is found to be satisfactory. These results can be explained by the fact that a bond line free from defects is successfully obtained from a wide range of ERW conditions.

• 한국전기전자재료학회논문지
• /
• 제28권8호
• /
• pp.524-530
• /
• 2015

We propose a three-electrode type electronic paper display and its fabrication process to realize single color at the same display panel. We establish a fabrication process with the mixing of electronic ink, loading of this ink, electronic ink assembly, packaging and driving. Also, we discuss an operating principle of this panel and the induced image reversal phenomenon by electric field area of the lower electrodes. This phenomenon is not occurred for the panel having $10{\mu}m$ electrode space. By this pixelation structure like this three-electronic paper display, a single color realization without color filter is possible and various kind of color is defined by a dye selection for charged particles and electrically neutral fluid.

• 한국공작기계학회논문집
• /
• 제17권5호
• /
• pp.107-115
• /
• 2008

In this research, it has been developed the tongs mechanism by a friction force for curbstone working. This tongs apparatus was farmed to grip and rotate the rectangular curbstone. Specification of this tongs apparatus has been determined by considering a loading weight and reversal load preventing reversal of 1.5 ton excavator. And, specification of the linear actuator has been determined with considering mechanical structure and the operation power demanded by the grip pad friction of tongs apparatus. The safety of the part has been examined from the 3D numerical simulation of the tongs apparatus. The operation system has been arranged to grip and rotate curbstone by on-off switching. The prototype has been established to carry out experiment after installing 1.5 ton excavator.

• 콘크리트학회논문집
• /
• 제28권2호
• /
• pp.187-196
• /
• 2016

KBC2009에 의하면 특수전단벽과 연결되는 폭이 좁고 춤이 높은 연결보는 대각선 다발철근 보강을 실시해야 한다. 그러나 대각선 다발 철근의 사용은 시공성과 경제성에 부정적인 영향을 미칠 것으로 예상된다. 이에 본 연구에서는 4개의 서로 다른 상세를 갖는 연결보를 대상으로 주기하중 재하 실험을 실시하여 각각의 성능을 평가하였다. 또한 그 실험결과를 바탕으로 하여 특수전단벽과 연결보로 이루어진 병렬전단벽 구조시스템을 구성하여 FEMA P695에 따른 방법론으로 내진성능평가를 실시하였다.

• 한국지진공학회논문집
• /
• 제14권6호
• /
• pp.55-65
• /
• 2010

본 실험 연구의 목적은 횡방향 정적가력을 통하여 2층 R.C 전단벽식 구조의 내진성능을 평가하는 것이다. 본 연구의 실험체는 대상 건물의 개구부를 가지는 T자형 벽체 1층과 2층의 일부분을 대상으로 실물크기의 3/5 크기정도로 축소하였고, 인방보의 유 무를 실험변수로한 2개의 실험체를 제작하여 횡방향의 정적가력 실험을 수행하였다. 인방보 유무에 따른 벽체의 구조적 성능 및 거동의 차이를 비교한 결과, 인방보가 있는 실험체가 인방보가 없는 실험체보다 최대내력과 연성능력 등의 내진성능이 우수한 것으로 판단되었다.