• Clean Technology
• /
• v.23 no.2
• /
• pp.163-171
• /
• 2017

Currently, researches on recycling and reuse of waste energetic materials have recently gained a great attention from advanced countries due to ever tightening environmental regulations. In this study, as a part of a recycling technology, the experiments and dynamic simulation of simulated moving bed (SMB) process were performed to efficiently separate TNT and RDX from their mixture, which are main components of ammunition. In order to determine the operation zone of SMB process, the retention times of TNT and RDX were measured using HPLC at different flow rates and the adsorption equilibrium of each component was obtained by using a moment method. According to the adsorption equilibrium and the triangle theory of SMB process, four operation points were determined and separation experiments were carried out by the SMB process using the solvent consisting of acetonitrile and water. Two different mixing ratios (6:4 and 1:1) of acetonitrile and water were chosen for the experiment due to the great impact of mixing ratio of the solvent on separation. The performance of SMB process was evaluated by purity, recovery, productivity and solvent consumption. Pure TNT and RDX were successfully obtained from the SMB process and the dynamic simulation for the SMB process agreed well with the experimental results. Therefore, the dynamic model could be applied for predicting the dynamic behavior of the SMB process and designing a large scale SMB process.

• Journal of Korean Society of Forest Science
• /
• v.79 no.3
• /
• pp.285-289
• /
• 1990

Soil N mineralization and nitrification can be measured conveniently using mixed bed (cation and anion) exchange resin bags. However, appropriate use of these resin bags requires pretreatment to avoid colorimetric interference and standardize N ion adsorption. Three pretreatments were evaluated : control (untreated), 2 M NaCl with a distilled water rinse, and 4 M NaCl. The 4 M NaCl treatment was effective at removing background levels of $NH_4{^+}$ and $NO_3{^-}$, but adsorbed low amounts (about 40%) of inorganic N from standard solutions. Untreated resin bags adsorbed a constant, higher amount of $NO_3{^-}$ (60%), but did not remove background levels of $NH_4{^+}$. The 2 M NaCl treatment followed by a distilled water rinse performed best : it removed background $NH_4{^+}$ and adsorbed a constant amount of both $NH_4{^+}$ (70%) and $NO_3{^-}$ (60%). Because the ion exchange resin is fairly expensive, we also tested if the resin bags could be reused. Resin bags were either loaded with $NH_4{^+}$ and $NO_3{^-}$ in the laboratory or incubated in soil in the field, desorbed with the 2 M NaCl treatment, and then loaded with standard $NH_4{^+}$ and $NO_3{^-}$ solutions. Lab loaded resin bags adsorbed about 60% of inorganic N then loaded with 2.5 or $5.0mgN\;1^{-1}$ and 70% when loaded at 10 or $20mgN\;1^{-1}$, whereas reused field incubated bags showed the opposite adsorption efficiency. These results demonstrate that resin bags can give reproducible results, but care must be taken to evaluate the effect of pretreatment and potential for reuse.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.10
• /
• pp.756-762
• /
• 2013

The economical feasibility was conducted to find the adequate method to treat the dredged sediments from agricultural reservoirs in a pilot project that had been operated to improve the quality of water and benthic environments by dredging of contaminated sediments. For benefit/cost (B/C) analysis, the net expenses were considered as the costs of project, and the benefits were calculated from the saving of waste-treatment cost through reuse of dredged sediment, the saving of construction cost of settling pond, and the values of retained water by dredging. Although the economic feasibility depended on the sites of operation, the average B/C value of the pilot project was estimated as 1.32, indicating this project is economically feasible. Depending on the treatment methods, the B/C values were in the order of the methods of coagulating sedimentation, machinery dewatering, stabilization through exothermic reaction, and soil improvement and stabilization. The machinery dewatering method is estimated as the most adequate one to treat the dredged sediments because of the minimum riskiness of secondary pollution, the recyclability, and its economic feasibility.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.439-439
• /
• 2012

본 연구의 목적은 색달하수처리장 방류수를 농업용수 및 조경용수 등으로 활용하기 위해 하수 처리수 재이용 사업 타당성을 분석하고자 한다. 색달하수처리장 하수재이용사업은 제주도의 지하수자원 보존과 수자원 이용의 고도화 및 방류수 재이용을 통한 갈수기 농업용수 보급으로 물자원(지하수)을 절약하고자 색달하수처리장을 대상으로 하수처리수를 농업용수로 공급하는 사업이다. 대상지역은 서귀포시 예래동에 위치하고 있으며, 중문관광단지가 소재한 마을로 제주관광의 중심지이다. 서귀포시의 총 인구는 153,797명이며 하수도 보급률은 77.7%이다('10 제주특별자치도 통계연보). 색달하수처리장이 위치한 예래동의 농지면적이 1,122ha이며, 밭(772.6)과 과수원(280.2) 등 제주도의 전형적인 농촌마을이다. 대상지역의 주요작물은 감귤, 무, 마늘, 양배추 등이 많이 재배된다. 제주도는 연평균 강수량이 1,832.6mm로 전국평균 1,274 mm 보다 많은 편이며, 월별 강수량은 6~8월까지 3개월 동안 연 강우량의 44%정도가 내려 여름 장마철에 집중되는 것으로 나타났다. 대상지구의 필요수량은 농업생산정비 계획설계기준에 제시된 방법을 이용하여 산정하였다. 지구내 재이용수를 공급할 관정 4개소의 총 설계 채수량은 $2,916m^3/day$, 급수면적은 125.0ha이며, 10년한발(가뭄)시 안정적인 농업용수 공급을 위하여 $4,964m^3/day$(농업용수 $3,834m^3/day$, 조경용수 $1,130m^3/day$)이 필요하다. 하수처리수 재이용을 위한 처리시설의 연간 유지관리비는 인건비, 전력비, 시설물 내구연한을 고려하여 적용 하였으며, 상수도 생산비 절감 비용과 하수재이용수 생산단가를 통한 단위 편익을 산정하면 401.5원/$m^3$ 이다. 연차별 수익으로 산정하여 비용 편익 비율(B/C Ratio)을 나타내면 1.22로 나타났다. 본 연구의 결과로부터, 대상지구의 수자원여건, 입지여건, 장래 수요, 등을 고려할 때, 제주 색달 하수처리장의 하수처리수의 농업용수재이용 사업은 타당성이 매우 높다고 할 수 있다. 그리고 특히 이 지역은 관광단지의 조경용수 수요(중문골프장 등)가 있어 용수의 유료공급이 가능하고 이를 유지관리비로 충당할 수 있어 타지역에 비해 사업의 경제성과 환경보전성이 매우 크다.

• Membrane Journal
• /
• v.8 no.2
• /
• pp.77-85
• /
• 1998

To treat effectively EDIR (electrodeposition ion removal) wastewater in terms of CO$_{Mn}$ 1,500~2,000 ppm generated from aluminum painting process, a RO (reverse osmosis) process was designed and installed to recover and reuse the concentrated solvent sent back to the electrocodeposition tank while the permeate reused as rinse water. A RO system in which three polyamide-spiral wound modules ($102\Phi \times 1,016L$ mm) connnected in series had been running to treat 20 m$^3$ in waste volume in 3 days batch operation at the condition of system recovery of 30 %, applied pressure 11.5 $kg_f/cm^2$ and room temperature. During 42 hours continuous operation leading to 5-fold decrease in waste volume, nearly constant permeation flux of 390 l/m$^2$-hr was maintained and the permeate with average CO$_{Mn}$, 300 ppm was obtained which could be used for washing the remaining paint solution in ion-exchange tower instead of demineralized water. Also COD$_{Mn}$ rejection as a function of running time was observed to be in the range of 78~87 % and the observed solvent rejections for ethyl cellusolve, buthyl cellusolve and n-butanol were 79 %, 87 % and 70 %, respectively.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.327-327
• /
• 2021

하수재이용에서 전처리 막여과 공정은 완벽한 고액분리로 인해 후단 역삼투막 손상을 줄일 수 있는 공정으로 각광을 받고 있다. 일반적으로 막여과 공정은 여과->물리세정->충진->여과 와 같은 제막사에서 제공하는 운전 사이클에 맞춰 적용하고 있으며 유지세정 역시 1회/일 또는 1회/주 단위로 정해진 범위에서 수행되고 있다. 이러한 운전 방식은 시시각각 변화하는 막 유입수질에 적절하게 대응하지 못해 장기적으로 막오염 발생에 따른 생산수량 감소는 물론 막오염 제거를 위한 화학세정 주기가 짧아져 전체적인 생산수량이 감소하는 원인이 되고 있다. Raffine(2012)에 따르면 가역적 막오염의 경우 Flux 증가에 큰 영향이 없으나 비가역적 막오염은 Flux 증가에 따라 급격히 증가한다고 보고하고 있으며 이는 제한된 분리막 면적당 처리수 생산량을 증가시키기 위해 비가역적 막오염의 발생량을 줄이는 것이 필요하며 이를 위해 주기적인 강화역세(Chemical Enhanced Backwashing, CEB)가 도입되고 효율적인 유지세정 방법에 대한 연구가 진행되고 있다. 당사에서는 일산에 있는 I 수질복원센터내에 25 m³/일 규모의 막여과 하수재이용 파일롯 플랜트를 설치하고 막여과 하수재이용 공정의 운영 효율을 높이기 위하여 W사에서 개발한 IntelliFluxControl(IFCr) 소프트웨어를 이용하여 하수재이용 막여과 성능을 확인 하였다. IFCr은 실시간으로 변화하는 수질에 따른 막오염 정도에 따라 역세 강도 및 빈도와 CEB 적용 정도를 변화시켜 분리막 운전의 효율을 높일 수 있는 운영 소프트웨어이다. I 수질복원센터의 하수 방류수를 막여과 유입수로 적용하여 40 LMH를 기준으로 IFCr을 적용하지 않은 경우 23.7일 운전 가능하였으나 IFCr을 적용한 경우 50일 연속 운전이 가능하였다. 또한 역세척수를 운전 기간 동안 약 50 m³을 사용한 반면 IFCr을 적용한 경우 이에 절반 수준인 24.1 m³ 만 사용하여 회수율이 91%에서 95%로 증가한 것을 확인 할 수 있었다. 본 연구의 결과는 기존의 제막사에서 제시하는 막 공정 운영방법을 탈피하여 분리막이 갖고 있는 성능을 최대한 끌어 올릴 수 있는 연구 결과라고 판단되며 향후 스케일 업 연구를 통해 실제 플랜트에 적용 가능성이 확인 될 경우 시설의 설치 막모듈 개수와 유지관리비를 동시에 절감할 수 있는 기술이 될 수 있을 것이다

• Journal of the Korean Geotechnical Society
• /
• v.40 no.3
• /
• pp.93-100
• /
• 2024

Pore water freezes in low-temperature compaction, which leads to different compaction characteristics compared to room temperature conditions. In regions like Alberta, Canada, where organic soils are prevalent, compaction performance is influenced by the high water retention and compressibility of organic soils, as well as their sensitivity to freezing and thawing. Alberta's strict environmental regulations demand the reuse of excavated soil for backfill, and the long winter season creates challenging conditions for civil engineering projects. In this study, a laboratory compaction test was conducted to evaluate the low-temperature compaction characteristics of organic soils with varying organic content. The results indicate that the optimum moisture content increases as the organic content increases, and the maximum dry unit weight decreases by up to 21.9%. In addition, under temperature conditions below -4℃, no optimum moisture content was observed, and the dry unit weight decreased as the moisture content increased.

• Korean Journal of Mineralogy and Petrology
• /
• v.35 no.3
• /
• pp.333-344
• /
• 2022

The quarrying and utilization of natural building stones such as granite and marble are rapidly emerging in developing countries. A huge amount of wastes is being generated during the processing, cutting and sizing of these stones to make them useable. These wastes are disposed of in the open environment and the toxic nature of these wastes negatively affects the environment and human health. The growth trend in the world stone industry was confirmed in output for 2019, increasing more than one percent and reaching a new peak of some 155 million tons, excluding quarry discards. Per-capita stone use rose to 268 square meters per thousand persons (m²/1,000 inh), from 266 the previous year and 177 in 2001. However, we have to take into consideration that the world's gross quarrying production was about 316 million tons (100%) in 2019; about 53% of that amount, however, is regarded as quarrying waste. With regards to the stone processing stage, we have noticed that the world production has reached 91.15 million tons (29%), and consequently this means that 63.35 million tons of stone-processing scraps is produced. Therefore, we can say that, on a global level, if the quantity of material extracted in the quarry is 100%, the total percentage of waste is about 71%. This raises a substantial problem from the environmental, economical and social point of view. There are essentially three ways of dealing with inorganic waste, namely, reuse, recycling, or disposal in landfills. Reuse and recycling are the preferred waste management methods that consider environmental sustainability and the opportunity to generate important economic returns. Although there are many possible applications for stone waste, they can be summarized into three main general applications, namely, fillers for binders, ceramic formulations, and environmental applications. The use of residual sludge for substrate production seems to be highly promising: the substrate can be used for quarry rehabilitation and in the rehabilitation of industrial sites. This new product (artificial soil) could be included in the list of the materials to use in addition to topsoil for civil works, railway embankments roundabouts and stone sludge wastes could be used for the neutralization of acidic soil to increase the yield. Stone waste is also possible to find several examples of studies for the recovery of mineral residues, including the extraction of metallic elements, and mineral components, the production of construction raw materials, power generation, building materials, and gas and water treatment.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.10
• /
• pp.1052-1057
• /
• 2005

Recently, the ozone treatment of wasting activated sludge has become one of the effective and feasible process for the sludge reduction. The objective of this study is to investigate the availability of ozonized wasting sludge on external carbon sources 13r phosphorus release. Experiment results showed that the ozone treatment of activated sludge could produce a large amount of VFA such as acetic acid and isobutyric acid. For example, 50.24 mg/L acetic acid was produced with the ozone dose of 0.05 g $O_3/g$ SS, and 123.56 mg/L acetic acid with 0.5 g $O_3/g$ SS. The higher ozone dose was applied, the more VFA was produced from sludge reduction into a limited point. Finally, using ozonated sludge as only carbon source, the batch experiment, to measure phosphorus release rate in anaerobic condition were performed. The specific phosphorus release rates were investigated as 0.94, 1.37, 1.48, 1.68 mg P/g VSS/hr with ozone dose of 0.05, 0.1, 0.2, 0.5 g $O_3/g$ SS, respectively. Considering the degree of mineralization, VFA production, phosphorus release rate, and economical aspect, the optimal ozone dose for sludge reduction and using carbon sources ranged from 0.05 to 0.1 g $O_3/g$ SS.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.10
• /
• pp.640-647
• /
• 2018

Many harbor structures have been constructed, and some structures are now under construction in Korea, which is a peninsular state and a logistics hub in Northeast Asia. Expansions and extensions of existing harbors are also being planned to meet increasing natural disaster threats. Wave-dissipation concrete blocks are recycled or discarded based on the personal experience of engineers only, and there are no safety checks or criteria. To check the safety of used blocks, material evaluations were done by visual inspection of blocks on the ground and under water and from 20 non-destructive measurements of the rebound hardness test and 3 concrete core samples. Wave-dissipation blocks are sometimes fully or partially damaged in the process of transferring and mounting them or during construction. Therefore, a safety check is essential for recycling blocks with an evaluation of materials while considering the construction phases. To do this, a block was modeled with a 3D finite element method using ADINA, and impact analyses were done according to the transfer, mounting, and construction phases. From the results of the impact analyses and material evaluation, the safety checks and reasonable evaluation of used blocks were examined, and detailed construction methods are proposed. The methods are expected to maximize the reuse of used wave-dissipation blocks from an economical point of view.