• Membrane Journal
• /
• v.18 no.1
• /
• pp.1-6
• /
• 2008

After membrane fouling factors in acrylic wastewater were minimized by pretreatment process accompanied with coagulation-filtration-neutralization, it was utilized in UF/RO process. After composing of ultrafiltration and reverse osmosis module set according to types and kinds of membrane, the separation characteristics were examined with the variation temperature and pressure using pretreated acrylic wastewater by membrane module sets. It was found that permeate flux of UF module in module set 4 was about two${\sim}$three times larger than that of UF module in module set 1. Final quantity of permeate from the module set 2 and module set 3 combined with tubular module was shown very good result. It was shown that the removal efficiency of TDS, T-N and COD was very low and was not dependent on the variation of temperature and pressure in all UF modules. The removal efficiency of TDS, T-N and COD was very excellent in RO module. Final water quality of acrylic wastewater was satisfied with effluent allowances limit and membrane module sets were ascertained to reuse wastewater.

• Journal of environmental and Sanitary engineering
• /
• v.10 no.2
• /
• pp.1-12
• /
• 1995

Under accelerated industrial developments environment pollution comes out to be very stirious. Especially the ions of heavy metal from wastewater, even if they are minimal, accumulated in ecology circle and do finally injury to human health. The general process for removal of heavy metals include coagulation and following sedimentation, ion -exchange and active carbon adsorption and sedimentation that applicate in popular, needs the expense of coagulant the additional treatment of sludge on the general process of coagulation and sedimentation. It is also a serious problem that the second pollution caused by coagulant. However chelating adsorption that uses natural chelating high- molecular compound has not pollution problem Among chelating high- molecules, the diminishing chitin that contained in crustaceans as crawfish and crab in our country with affluent water resources are easy to get. So it is advantageous to use this ubiquitous material for removing heavy metals because we could reuse natural resource. In this research, the author tested the effectiveness of the adsorption and removal of heavy metal ions by chitin and its derivatives. Chitin and cellulose became beads and used as flocculant, in this test. The results are as follows . First, bead showed higher removal ratio than powder in the comparative test on adsorbents such as chitin, chitosan and cellulose. Secondly, in the variety test by the kinds of adsorbent and time. chitosan bead and cellulose bead that showed the highest removal ratio. One hour need to remove the ions of heavy metal. Thirdly, the results of the adsorption degree test by pH revealed high removal ratio adsorption of chitin, cellulose and chitosan bead in alkalin condition but chitosan bead in acidic condition.

• Journal of Korea Spatial Information System Society
• /
• v.3 no.1 s.5
• /
• pp.75-87
• /
• 2001

The advantages of using components result from their reusability between applications. Applications can be easily implemented by adding components. In this paper, we described the design and implementation process of ASC(Application Service Component) for component-based GIS applications. In our project, there are 5 applications : Road Facility Management, Urban Planning, Cadastral Map Management, Water Supply Management, and Sewerage Management. All of them use MapBase component which supports common GIS functionality. Although they are different applications, some parts of them are same. We analyzed the developed results in 1st and 2nd year, and the achievement of UIS(Urban Information System) project in Busan Metro City in Korea. The UIS of Busan was consisted of 5 applications to equal with our project. Then, we extracted 11 common used components between 5 applications, and implemented 5 common components of them and 2 additional components. They were Authority, GISReport, IndexMap, Measurement, Search, Symbol Manager, and Attribute Display. As we offered them to companies developing application components, they were able to reduce the development time.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.53 no.4
• /
• pp.67-74
• /
• 2011

The objectives of this study were to assess the rice yields and evaluate fertilizer reduction effect of reclaimed wastewater irrigation in paddy fields using the Decision Support System for Agrotechnology Transfer (DSSAT) v4.5 model. The experimental plots were designed, which was located near the Suwon wastewater treatment plant in Gyeonggi-do, Korea. The rice yield, irrigation amount, irrigation water quality and soil data were monitored and collected between 2006 and 2009. The DSSAT model was calibrated and validated with observed data. The methods that were used to evaluate this model were the root mean square error (RMSE), normalized root mean square error (nRMSE), and index of agreement (d). The values of RMSE, nRMSE, and d ranged from 145 to $789\;kg\;ha^{-1}$, 3.0 to 13.3 %, and 0.90 to 0.95 for the calibration period, respectively and represented from 91 to $538\;kg\;ha^{-1}$, 2.0 to 10.4 %, 0.94 to 0.98 for the validation period, respectively. Overall, this model showed good agreement with observed data of rice yields irrigated with reclaimed wastewater. The fertilizer reduction effect in paddy field of reclaimed wastewater irrigation was assessed about 60 % in 2008 and 40 % in 2009.

• Clean Technology
• /
• v.9 no.3
• /
• pp.115-124
• /
• 2003

Bio industry had rapidly grown up to about 32% annualy mean since '90. To overcome a trade barrier related with environmental issues, which were needed to reduce and reuse pollutants generated from the manufacturing process of product to develop and apply cleaner technology. In this paper, the usefulness of membrane process were surveyed for economical and effective treatment of waste water which were discharged from the production of polymannuronic acid. Concentration efficiencies for U/F 10k, U/F 1k, and N/F were 40%, 60%, and 80% by batch operation. Concentration efficiencies for a combination process of U/F 1k and N/F were 90% by continuous operation. There were a lot of loss of product, which could improve 25% of productivity with recovering product by introducing membrane process.

• Korean Chemical Engineering Research
• /
• v.44 no.6
• /
• pp.579-587
• /
• 2006

Recently, each country has been trying to promote Eco-Industrial Park (EIP) development for industrial sustainability. Technological modeling is required to realize EIP practically even though the project contains the political concerns for many companies, government, and self-governing bodies. The four main technologies of the EIP developments include energy exchange, material flow analysis, water pinch, and life cycle assessment. Material flow analysis (MFA) methodology can be utilized in EIP modeling in view of the fact that the analysis of material flows and the optimized modeling are major purposes for the technological modeling of EIP. Through MFA methodology in POHANG EIP project, how to apply MFA modeling to EIP modeling and how to utilize software for MFA modeling are shown in this research.

• Journal of Animal Science and Technology
• /
• v.52 no.6
• /
• pp.513-519
• /
• 2010

A series of experiments were performed to study the influence of the following parameters on the physical traits and composition of swine manure compost: (1) addition of magnesium (Mg) at a molar ratio of 1.2 with respect to $PO_4$, and (2) reutilization of compost containing $MgNH_4PO_4{\cdot}6H_2O$ (magnesium ammonium phosphate, MAP). Three independent batch tests were conducted for replication: batch test I-control (C) and Mg added (T), batch test II-C, T and compost recycle ($T_{R1}$), and batch test III-C, T and compost recycle ($T_{R2}$). Magnesium addition and compost reutilization had no adverse effect on the degradation of organic matter. Reuse of the compost, however, had a clear effect on the total nitrogen (TN) and total phosphorus (TP) contents in the final compost. Repeated compost reutilization as a bulking material was resulted in composts rich in N and P. Upon adding the Mg supplement to the composting materials, the ortho-phosphate (OP) to TP ratio decreased due to the MAP crystallization reaction. The decrease in the OP/TP ratio and the increase in the TP content of the compost indicate that water-soluble phosphate is converted into a slow-release phosphate by the formation of crystals during composting. X-ray diffraction analysis of the irregular shaped crystals in the compost indicated that they are MAP crystals and that the crystallization of MAP begins immediately after the addition of the Mg supplement. The Mg addition to composting materials and the reutilization of compost as a bulking material would be a practical means to conserve nutrient content.

• Journal of agriculture & life science
• /
• v.44 no.6
• /
• pp.183-189
• /
• 2010

This study assess the effects of reclaimed wastewater irrigation on grain quality-related properties of milled rice. To conduct the effects of wastewater reuse on rice quality, the contents of amylose, protein, and milled head rice recovery were analyzed. The water and the soil quality were monitored, and the grain characteristic was analyzed using a NIRS (Near Infra-Red Spectroscopy). The value of the grain properties of the rice which was cultivated with the reclaimed wastewater didn't show a big difference from other common rice. The significant difference by each processing distinction was shown at the significance level of 5% in the statistical result.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.54 no.4
• /
• pp.418-425
• /
• 2021

The effects of an aquaponic system based on biofloc technology (BFT-AP) were analyzed for eel Anguilla japonica as aquaculture species and caipira Lactuca sativa as the cultivated crops. The rate of weight gain rate by the eels was 178% (BFT-AP 200 head) > 136% (BFT-AP 100 head) > 100% (BFT). The eel body weight in the BFT-AP (200 head) significantly increased when compared to the BFT only eel group (P<0.05). The weight of the upper layer of caipira was 91±8.5 g (200 head) > 90±8.9 g (100 head) > 48±8.3 g (Hydroponic crop, HP). The crop growth in all BFT-AP groups was higher than the control, the hydroponic group. The total ammonia nitrogen (TAN) and NO₂^--N concentrations decreased in the BFT-AP group when compared to the BFT group. It was possible to remove nitric acid from the aquaponics system and reuse it as eel rearing water. Although some nutrient concentrations were low in BFT when compared to HP, the nutrient concentration was sufficient for plant growth. The results show that BFT has the potentially to provide a sustainable aquaponic system.

• Environmental Engineering Research
• /
• v.24 no.2
• /
• pp.263-270
• /
• 2019

Palm oil mill effluent (POME) is the largest pollutant discharged into the rivers of Malaysia. Thus UF membrane study was conducted to investigate the effect of pressure and stirring speed on performance of POME treatment and fouling of membrane. Two types of membrane polyethersulfone (PES) and regenerated cellulose (RC) with molecular weight cut-off (MWCO) 5 and 10 kDa were used in this study. Results showed that, as pressure increased, fouling increased however permeate quality improved, the best pressure was 1.0 bar, where the fouling was not too high and produce good permeate quality. As stirring speed increased, fouling reduced and permeate quality improved, however, when stirring speed increased from 600 rpm to 800 rpm, there was no significant improvement on the permeate quality. Therefore, the best condition was at 1.0 bar and 600 rpm. PES membrane with MWCO 5 kDa showed the best permeate quality, even fouling slightly higher than RC membrane. The permeate quality obtained were analyzed in term of dissolved solid, turbidity, suspended solid, biological oxygen demand ($BOD_5$) and chemical oxygen demand (COD) were 538 mg/L, 1.02 NTU, < 25 mg/L, 27.7 mg/L and 62.8 mg/L, respectively with dominant type of fouling is cake resistance. Thus, it can be concluded water reuse standard was successfully achieved in terms of $BOD_5$ and suspended solid.