• Bulletin of the Korean Chemical Society
• /
• v.33 no.7
• /
• pp.2251-2254
• /
• 2012

A rapid and practical green route for N-formylation of primary and secondary amines with formic acid at room temperature under the solvent-free conditions using HEU zeolite as a heterogeneous, reusable and highly efficient catalyst is described. The process is remarkably simple and environmentally benign. Excellent chemoselectivity was observed for the conversion of primary amines in the presence of secondary amines.

• Journal of the Korean Chemical Society
• /
• v.57 no.3
• /
• pp.357-360
• /
• 2013

Sustainable development is a balance between environment and development. Sustainable development requires sustainable supplies of clean, affordable, and renewable energy sources that do not cause negative impact to the society. This article introduces a green chemistry method to synthesize 2-amino-4H-chromenes that reduces or eliminates the use and generation of hazardous substances in the design, manufacture, and application of chemical products. This method is described using copper (II) sulfate pentahydrate, as a green and reusable catalyst on water. The products were obtained at very good yields, short reaction time, and at lower cost than other reported procedures.

• Applied Microscopy
• /
• v.52
• /
• pp.7.1-7.6
• /
• 2022

The process of encapsulating cobalt nanoparticles using a graphene layer is mainly direct pyrolysis. The encapsulation structure of hybrids prepared in this way improves the catalyst stability, which greatly reduces the leaching of non-metals and prevents metal nanoparticles from growing beyond a certain size. In this study, cobalt particles surrounded by graphene layers were formed by increasing the temperature in a transmission electron microscope, and they were analyzed using scanning transmission electron microscopy (STEM). Synthesized cobalt hydroxide nanosheets were used to obtain cobalt particles using an in-situ heating holder inside a TEM column. The cobalt nanoparticles are surrounded by layers of graphene, and the number of layers increases as the temperature increases. The interlayer spacing of the graphene layers was also investigated using atomic imaging. The success achieved in the encapsulation of metallic nanoparticles in graphene layers paves the way for the design of highly active and reusable heterogeneous catalysts for more challenging molecules.

• Journal of the Korean Chemical Society
• /
• v.32 no.6
• /
• pp.593-602
• /
• 1988

Polymer-supported crown ethers (Ps-CE) which can be used for phase-transfer catalyst (PTC) were synthesized for the purpose of allowing reusable function to ordinary crown ethers, and the kinetics of the liquid-solid-liquid triphase-catalyzed nucleophilic displacement reaction of iodide (aqueous phase) on 1-bromooctane (organic phase) using synthesized Ps-CE (solid) were studied. Ps-CE were obtained by grafting of hydroxymethyl crown ethers to 1~2% cross-linked chloromethylated polystyrene. All reactions followed a pseudo-first order dependency on the 1-bromooctane concentration and the observed rate constants $(k_{obsd})$ were linearly related to the molar equivalents of Ps-CE, and were subjected to the influence of cross-linking density of polymer backbone, solvent and the reaction temperature. The catalytic activity of Ps-CE was also compared with that of structurally similar soluble crown ethers, and used Ps-CE were easily recovered after the reaction by simple filtration and could be reused without loss of catalytic activity in the same anionic displacement reaction. Enthalpies and entropies of activation associated with the displacement were 10~20kcal $mol^{-1}, 20~55eu. respectively, and the free energy of activation was ~30kcal mol^{-1}$.

• Resources Recycling
• /
• v.12 no.1
• /
• pp.55-64
• /
• 2003

Presently, the reuse of waste FCC catalysts, which generated from the refining process of crack oil, after the removal of con-taminated metallic impurities have not been attempted domestically yet because the separation technology f3r the impurities from waste catalysts has not been established. As a basic study far the reusable portion from the waste FCC catalysts and treatment of metallic impurities are assured, there will be invoked an significant contribution not only in the recycling of abandoned wastes up to date but also in the treatment efficiency of wastes and extraction of economical benefits from them. The magnetic separation of impurities such as Fe, Ni, and V, from waste FCC catalyst has been attempted with or without its pre-oxidation at high temperature for the purpose of its reuse. The results showed that the separability of impurities by magnetic force was high far non-preoxidized catalysts compared with preoxidized ones, and employment of screen-type matrix showed a higher separation efficiency than ball-type matrix. The separability increased with the strength of magnetic field, and the method of ball matrix has separation efficiency of maximum 51.10%. The amount of metallic impurities was in the decreasing order of V, Ni, and Fe depending upon ICP analysis.

• Korean Chemical Engineering Research
• /
• v.56 no.4
• /
• pp.441-446
• /
• 2018

Herbaceous biomass is easier at chemical conversion than woody biomass. However, pretreatment must be needed because it has substantially lignin. Organsolv is good at fractionation of enzymatic hydrolysis inhibitors such as lignin and it is reusable by distillation when it has low molecular weight. Flow-through process can prevent recondensation of fractionated components and easily separate liquid from the biomass. In this study, the pretreatment was performed for decreasing additional process by using ethanol without catalyst because this process has a lot of operation expense at bio-alcohol production process. Flow-through pretreatment was performed at $150{\sim}190^{\circ}C$ with 30~99.5 wt% ethanol during 20~60 minutes. Also the phsyco-chemical pretreatment was performed for decreasing reaction time and temperature.

• Applied Chemistry for Engineering
• /
• v.34 no.2
• /
• pp.126-130
• /
• 2023

In response to environmental demands, pyrolysis is one of the practical methods for obtaining reusable oils from waste plastics. However, the waste plastic pyrolysis oils (WPPO) are consumed as low-grade fuel oil due to their impurities. Thus, this study focused on the upgrading method to obtain naphtha catalytic cracking feedstocks from WPPO by the hydroprocessing, including hydrotreating and hydrocracking reaction. Especially, various transition metal sulfides supported catalysts were investigated as hydrotreating and hydrocracking catalysts. The catalytic performance was evaluated with a 250 ml-batch reactor at 370~400 ℃ and 6.0 MPa H₂. Sulfur-, nitrogen-, and chlorine-compounds in WPPO were well eliminated with nickel-molybdenum/alumina catalysts. The NiMo/ZSM-5 catalyst has the highest naphtha yield.