• 한국의학물리학회지:의학물리
• /
• 제27권4호
• /
• pp.175-179
• /
• 2016

In this study, we evaluated the reusable leuco malachite green (LMG) micelle gel properties dependent on various components of chemical concentration and compared with leuco crystal violet (LCV). The gels were delivered to 10, 20, 30, 40 and 50 Gy at 6 MV photon beam from linear accelerator and analyzed using spectrophotometry. We confirmed that the reusable LMG and LVC absorbance wavelength peak were made up at 630 nm and 600 nm respectively. The transparency of reusable LMG decreased with higher amount of trichloroacetic acid (TCAA) and lower reusable LMG dyes. 1 mM reusable LMG was the lowest transparency. The sensitivity was increased depending on lower trichloroacetic acid (TCAA) concentrations and the amount of suitable surfactant (Triton X-100), which was found to be 7 mM. However, we were not able to investigate sensitivity effects factor from reusable LMG dyes. The gel dosimeter containing 16 mM TCAA, 7 mM Triton X-100 gel dosimeter showed the highest sensitivity at $0.0021{\pm}0.0001cm^{-1}.Gy^{-1}$. The sensitivity of LCV was found to be higher than reusable LMG at $0.0037{\pm}0.0005cm^{-1}.Gy^{-1}$. The reusable LMG and LCV dose responses were shown to be $R^2=0.997$, $R^2=0.999$ respectively, as stable measurement results. Future research is necessary to improve dose sensitivity, dose rate dependency and gel fading with extensive chemical formulations.

• 한국컴퓨터산업학회논문지
• /
• 제10권3호
• /
• pp.87-92
• /
• 2009

소프트웨어 재사용을 위한 콤포넌트의 식별은 사용자에게 적절한 콤포넌트가 발견되지 않았을 때 예비 콤포넌트에 대한 정보를 제공하는 안내역할을 수행하여야만 한다. 또한, 믿을 수 있는 소프트웨어 컴포넌트의 재사용은 각 새로운 어플리케이션에 대해 같은 컴포넌트를 재설계하거나 재 코딩하는 것보다 훨씬 위험이 적고 효과적이다. 본 논문에서는 먼저 재사용 프로세스에 대하여 알아보고 이어서 재사용 가능한 컴포넌트 구축을 위한 재사용 모형 및 구축방법을 분석 하고자하며, 이를 이용한 재사용 가능한 컴포넌트에 대하여 제안하고자 한다. 이는 향후 효율적인 프로그램을 설계하고 작성하는데 도움이 될 것이다.

• 한국유기농업학회지
• /
• 제28권3호
• /
• pp.335-346
• /
• 2020

The objective of this study is to analyze the consumer perception of reusable wreath and present the considerations for introducing the labeling system, and to calculate the social benefits and costs of that. For this, We did an internet survey on the perceptions and willingness-to-pay for reuse wreath to 330 adults. As a result, only 56.1 percent of those who ordered wreath were found to check whether they actually arrived. 73.6% of the respondents had the willingness-to-purchase a reusable wreath if the price was reasonable, and 43.6% were in favor of labeling reused wreath as 'reused wreath'. The social benefits of introducing the reusable currency marking system are about 155,692 million won and the social cost about 43.52 million won. If reusable wreath are not recognized and purchased at the price of new one, economic and emotional losses of domestic horticulture farmers and consumers may occur. Therefore, related agencies will be able to expand sales of domestic flower producers and protect the economic and emotional benefits of consumers if they make efforts to establish and operate a reusable wreath labeling system.

• 한국IT서비스학회지
• /
• 제13권3호
• /
• pp.201-219
• /
• 2014

This paper considers service deployment and priority optimization for multiple service-oriented applications sharing reusable services, which are deployed as multiple instances in the cloud. In order to handle variations in the workloads of the multiple applications, service instances of the individual reusable services are dynamically provisioned in the cloud. Also service priorities for each application in a particular reusable service are dynamically adjusted. In this paper, we propose an analytic performance model, based on a queueing network model, to predict the expected sojourn times of multiple service-oriented applications, given the number of service instances and priority disciplines in individual reusable services. We also propose a simple heuristic algorithm to search an optimal number of service instances in the cloud and service priority disciplines for each application in individual reusable services. A numerical example is also presented to demonstrate the applicability of the proposed performance model and algorithm to the proposed optimal decision problem.

• 센서학회지
• /
• 제27권5호
• /
• pp.340-344
• /
• 2018

Electrodes are an important part of electrocardiography (ECG); disposable electrodes have been extensively used. However, personal ECG monitoring devices for Internet of Things applications require reusable electrodes. As there have been no systematic studies on the characteristics of reusable electrodes to date, we conducted this study to assess the performance and feasibility of electrodes with different materials. We built reusable electrodes using twelve different metallic materials, including commonly used copper, silver, zinc, plating materials, chemically inert titanium, stainless steel, and aluminum. Each electrode was fabricated to a size of $5{\times}10mm$. Their characteristics such as offset, baseline drift, stabilization time, and chemical inertness were compared. A personal ECG monitoring system was used to test the manufactured electrodes. The performances of the Ag, Cu, and Zn electrodes were better than the performances of other electrodes. However, these materials may not be used owing to the chemical changes that occur when the electrodes are in contact with the skin, such as discoloration and corrosion, which deteriorate their electrical characteristics. Titanium, stainless steel, and aluminum are chemically stable. The titanium electrode showed the best performance among the three, and it is our recommendation as a material for manufacturing reusable electrodes.

• 한국추진공학회지
• /
• 제24권2호
• /
• pp.35-42
• /
• 2020

최근 위성 발사체를 재사용하여 발사비용을 절감하려는 노력이 SpaceX를 비롯한 민간 기업에서 시도되어 많은 성공을 거둠으로써 재사용발사체가 발사체 시장의 큰 흐름이 되고 있다. 그러나 발사비용 측면에서 재사용발사체가 유리한 것인가에 대하여서는 논란의 여지가 여전히 존재하며, 재사용 발사체에 대한 개발 초기 단계에서 이에 대한 면밀한 검토가 필요하다. 본 연구에서는 재사용 발사체의 발사비용에 영향을 미치는 가격인자들에 대하여 발사비용의 민감도 분석을 수행한다. 민감도 분석의 기준은 임무중량 20톤의 소모성 발사체의 발사비용으로 하며, 발사비용의 계산에 사용된 비용추청관계식(CERs)은 TRANSCOST 등의 비용모델을 활용하여 계산한다. 주요 비용인자는 개발비용, 제작비용, 수리비용 및 재사용 가능 횟수로 한다.

• Journal of Korean Biological Nursing Science
• /
• 제21권2호
• /
• pp.133-140
• /
• 2019

Purpose: The purpose of this study was to check the degree of residual microbial contamination after disinfection of reusable suction containers, used in an intensive care unit (ICU) and present basic data for efficient use through cost analysis in comparison to disposable suction containers. Methods: This study was conducted on 32 reusable suction containers used in an ICU on a selected specific day. After disinfection and washing, specimens were collected from the used containers and cultured to check for microbial contamination. Additionally, a comparative narrative study analyzes the cost of using reusable suction containers and disposable suction containers. Data were analyzed with the SPSS WIN 20.0 program using real numbers and percentage ${\chi}^2$-test. Results: As a result of the study, microorganisms were found in all samples where in 30 were gram-positive (62.5%) while 13 were gram-negative (27.1%). Based on level of contamination, microorganisms were less than 10CFU/ml in 18 samples (56.3%); 11-99CFU/ml in six samples (18.8%); and more than 100CFU/ml in eight samples (25%). Cost per day for a reusable suction container was $10,655+{\alpha}$ while cost per day for a disposable suction container was 10,666 won. Conclusion: This study found that reusable suction containers, even after disinfection, accounted for factors of potential infection as well as microbial contamination. So, disposable suction containers are superior in cost-effectiveness and highly efficient for use with infected patients.

• 한국항공우주학회지
• /
• 제45권12호
• /
• pp.1069-1075
• /
• 2017

최근 우주 기술이 발달함에 따라 전 세계적으로 위성 시장, 특히 소형 위성 시장이 크게 성장하고 있다. 이러한 위성 시장의 성장세 속에서 발사체 시장 역시 성장세를 보이고 있으며 이에 따라 저비용 발사에 대한 수요가 점점 증가하고 있다. 저비용 발사를 위한 방안에는 저비용 추진제를 사용하는 엔진 개발, 제품 생산 및 운송비용 절감 등 다양한 방법이 존재하지만, 발사 비용을 가장 크게 줄이는 방법은 바로 사용한 발사체를 다시 사용하는 것이다. 재사용 발사체의 시작은 유인 우주선으로 유명한 미국의 Space Shuttle이라 할 수 있다. 하지만 Space Shuttle의 경우 재사용이라고 불리기는 하지만 재사용 할 수 있는 부분이 한정되어 있고, 발사 효율이 떨어져 재사용 발사체 임에도 불구하고 상당히 고비용이었다. 최근에는 미국의 SpaceX와 Blue Origin을 중심으로 상업적 목적의 재사용 발사체가 개발 되고 있고 재착륙 시험에 성공하였다. 뿐만 아니라, SpaceX의 경우 이전 재착륙을 성공한 1단 발사체를 정비하여 다시 발사하는데 까지 성공하기도 하였다. 이러한 추세에 따라 유럽, 인도와 같은 국가에서도 현재 재사용 발사체 연구에 심혈을 기울이고 있다. 그리고 Blue Origin을 포함한 미국의 Virgin Galactic, XCOR 등은 민간 유인 우주여행과 같은 재사용 기술을 이용한 상품화도 시도하고 있다. 재사용 기술이 확립되면 세계 발사체 시장의 판도가 바뀔 수 있기에 재사용 기술 동향의 정기적인 확인은 필수적이라 할 수 있다.

• 대한기계학회논문집A
• /
• 제29권2호
• /
• pp.228-231
• /
• 2005

In this paper, we present reusable quartz master fabricated by electron-beam lithography and dry etching process of quartz, and results of injection molding based on the reusable quartz master for the manufacturing of nano-scale information media. Since patterned structures of photoresist can be easily damaged by separation (demolding) process of nickel stamper and master, a master with photoresist cannot be reused in stamper fabrication process. In this work, we have made it possible of the repeated use of master by directly patterning on quart in nickel stamper fabrication process. We have designed and fabricated four different specimens including 100nm, 140nm 200nm and 400nm pit patterns. In addition, both intaglio and embossed carving patterns are fabricated for each specimen. In the preliminary test of injection molding, we have fabricated polycarbonate patterns with varying mold temperature. We have experimentally verified the fabrication process of the reusable quart master and possibility of quartz master as direct stamper.

• ETRI Journal
• /
• 제38권5호
• /
• pp.818-828
• /
• 2016

This paper proposes a reusable design for the merging process used in three-dimensional High Efficiency Video Coding (3D-HEVC), which can significantly reduce the implementation complexity by eliminating duplicated module redundancies. The majority of inter-prediction coding tools used in 3D-HEVC are utilized through a merge mode, whose extended merging process is based on built-in integration to completely wrap around the HEVC merging process. Consequently, the implementation complexity is unavoidably very high. To facilitate easy market implementation, the design of a legacy codec should be reused in an extended codec if possible. The proposed 3D-HEVC merging process is divided into the base merging process of reusing HEVC modules and reprocessing process of refining the existing processes that have been newly introduced or modified for 3D-HEVC. To create a reusable design, the causal and mutual dependencies between the newly added modules for 3D-HEVC and the reused HEVC modules are eliminated, and the ineffective methods are simplified. In an application of the proposed reusable design, the duplicated reimplementation of HEVC modules, which account for 50.7% of the 3D-HEVC merging process, can be eliminated while maintaining the same coding efficiency. The proposed method has been adopted as a normative coding tool in the 3D-HEVC international standard.