• 한국환경농학회지
• /
• 제41권3호
• /
• pp.199-205
• /
• 2022

BACKGROUND: The freezing injury by pruning can be reduced by suspending pruning work when severe cold weather (-23 to -49℃) is forecast. Minimum air temperature of the study area, Gunwi region at February 3, 2012 was -21.9℃, and the subzero temperature continued until April 8, 2012. This study was conducted in two years to investigate the effect of delaying winter pruning until full bloom on shoot growth and fruit quality of 'Fuji'/M.9 apple trees. METHODS AND RESULTS: The time of pruning were March 26 for dormant, April 3 for bud break, and May 2 for full bloom. The winter pruning at full bloom significantly reduced fruit weight for two years compared with the control (winter pruning at dormant), and shoot growth was reduced only in the following year. There was no significant effect of delaying winter pruning at bud break on soluble solid content, fruit red color, return bloom, and pruning weight for two years compared with the control. CONCLUSION(S): These results indicated the delaying winter pruning at bud break of 'Fuji'/M.9 apple tree did not offer any disadvantage over comparable dormant pruning, since the fruit quality was not affected. The delayed pruning at full bloom resulted in decreased fruit weight, though shoot growth, fruit quality, and return bloom were not affected by the delayed pruning. So, the delayed pruning should be considered carefully only for the fruit tree orchards in diseases.

• 한국농공학회논문집
• /
• 제51권3호
• /
• pp.25-35
• /
• 2009

Climate change due to global warming possibly effects the agricultural water use in terms of evapotranspiration. Thus, to estimate rice evapotranspiration under the climate change, future climate data including precipitation, minimum and maximum temperatures for 90 years ($2011{\sim}2100$), were forecasted using LARS-WG. Observed 30 years ($1971{\sim}2000$) climate data and climate change scenario based on SRES A2 were prepared to operate the LARS-WG model. Using these data and FAO Blaney-Criddle method, reference evapotranspiration and rice evapotranspiration were estimated for 9 different regions in South Korea and rice evapotranspiration of 10 year return period was estimated using frequency analysis. As the results of this study, rice evapotranspiration of 10 year return period increased 1.56%, 5.99% and 10.68% for each 30 years during $2011{\sim}2100$ (2025s; $2011{\sim}2040$, 2055s; $2041{\sim}2070$, 2085s; $2071{\sim}2100$) demonstrating that the increased temperature from the climate change increases the consumptive use of crops and agricultural water use.

• 마이크로전자및패키징학회지
• /
• 제9권2호
• /
• pp.33-38
• /
• 2002

패키지는 전기적인 특성에 있어서 적은 삽입손실과 반사손실 특성이 요구된다. 따라서 이러한 고주파 전송 특성이 우수한 패키지를 설계하기 위하여 본 논문에서는 LTCC (Low Temperature Cofired Ceramic) 기술을 이용한 세라믹 패키지를 설계하였고, 유한요소법(FEM: Finite Element Method)을 이용하여 DC~30 GHz에서 해석하였다. 해석 결과, 설계된 패키지 급전구조는 30 GHz까지 삽입손실과 반사손실이 각각 0.32 dB, 16.8 dB 이내의 양호한 특성을 얻었다. 따라서 본 논문에서 설계된 세라믹 패키지는 MMIC (Monolithic Microwave Integrated Circuit) 모듈 개발에 효과적으로 활용될 수 있으리라 기대된다.

• 한국유체기계학회 논문집
• /
• 제19권6호
• /
• pp.26-33
• /
• 2016

Combined heat and power (CHP) system is one of the power generation system which can generate both electricity and heat. Generally, mid-size and big-size CHP plant in Korea generate electricity from gas turbine and steam turbine, then supply heat from exhaust gas. Actually, CHP can supply heat using district heater which is located at low pressure turbine exit or inlet. When the district heater locates after low pressure turbine, which called back pressure type turbine, there need neither condenser nor mode change operating control logic. When the district heater locates in front of low pressure turbine or uses low pressure turbine extraction steam flow, which calls condensing type turbine, which kind of turbine requires condenser. In this case, mode change operation methods are used for generating maximum electricity or maximum heat according to demanding the seasonal electricity and heat.

• 폴리머
• /
• 제27권3호
• /
• pp.201-209
• /
• 2003

나일론의 종류에 따른 분쇄형 탄소 섬유/나일론 복합재료의 직류 및 교류 전도도, 그리고 전자기파 차폐 효율을 조사하였다. 탄소 섬유의 함량이 약 7 vol%에서 전도도가 급격하게 증가하는 percolation 전이가 관찰되었다. 나일론 46을 기저 수지로 하였을 경우 더욱 높은 전기 전도도를 나타냈으며, 계면 결합제의 적용 여부에 따라 전도도의 차이가 발생하였다. 온도증가에 따라 전도도가 증가하는 negative temperature coefficient 현상을 나타냈으며, percolation 전후의 탄소 섬유 함량에서의 주파수에 따른 전도기구를 완화와 공진 현상으로 각각 달리 설명할 수 있었다. 회로망 분석기를 통하여 측정한 전자기파 차폐 효율은 전도도 및 탄소 섬유의 함량에 따라 증가하였으며, 높은 전도도 영역에서의 전자기파 차폐 효율은 반사에 의한 차폐가 지배적이었다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.209-212
• /
• 2001

Aircraft industry is developed very fast so titanium scrap was generated to manufacture. Titanium scrap was wasted and used to deoxidize cast iron so we are study recycling of it. In this research were studied that metal hydride of reacted in hydrogen chamber of AMS4900, 4901, return scrap titanium alloy and sponge titanium granule. The temperature of hydrogenation was 40$0^{\circ}C$ in the case of pure sponge titanium but return scrap titanium alloy were step reaction temperature at 40$0^{\circ}C$ and 50$0^{\circ}C$, and after the hydride of titanium alloy were crushed by ball mill for 5h. Titanium hydride contains to 4wt.% of hydrogen theoretically as theory. It was determined by heating and cooling curve in reaction chamber. The result of XRD was titanium hydride peak only that it was similar to pure titanium. Titanium hydride Powder particle size was about 45${\mu}{\textrm}{m}$, and recovery ratio was 95w% compared with scrap weight for a aluminum foam agent.

• 조명전기설비학회논문지
• /
• 제25권6호
• /
• pp.9-17
• /
• 2011

The high-power LED (Light Emitting Diode) which is recently gaining popularity as a digital light source has such advantages as low power consumption, long life, fast switching speed, and high efficiency. Thus, many efforts are being made to use the high-power LEDs for general lighting. This paper proposes LED driving circuit uses a DC/DC converter that can recover energy to compensate for the current variations caused by changes in LED equivalent resistance following a temperature change instead of serial resistance. The maximum input voltage of this DC/DC converter has low voltage variations by temperature change when the rated current is formed. In order to return current to the input side, we need a high boosting at low power. Thus, to improve the low efficiency of power converter, the power converter can be configured in such a way to gather the powers of low-capacity DC/DC converters and return the total power. Experiments showed that the proposed system improved efficiency compared to the conventional LED drive using the existing DC/DC converter.

• 대한설비공학회지:설비저널
• /
• 제10권4호
• /
• pp.304-315
• /
• 1981

This paper presents, the result of the study for the fluctuant temperature of the out-side air adopting the heat pump system in seoul, Taejean, Taegu, Busan and Jejeu among principle cities in korea for the purpose of checking the heating capacity, Heat pump capacity (outlet capacity), Coefficient of performance and running cost in comparison with the supporting the energy for the boiler's operation. According to the supply temperature changes of the out door coil by the out side air-return air mixing ratio, the Coefficient of performance is increased from 3. 1 to 5.0. Particularly, in Taegu, it is necessary to adopt the heat pump system against the supplement heat supply on the full outside air intake in January of the heating period, and it was recognized that the running cost is cheaper than that of the Boiler use. At the same time, if it is able to get $25\%$ of return air of the inside in the Seoul, it could be saved its costs when we use the supplementary boiler. And I think it is necessary to the development.

• 한국초전도ㆍ저온공학회논문지
• /
• 제26권1호
• /
• pp.25-30
• /
• 2024

High-temperature superconducting rotors offer advantages in terms of output-to-weight ratio and efficiency compared to conventional phase conduction motors or generators. The rotor can be cooled by conduction cooling, which attaches a cryocooler, and by refrigerant circulation, which uses circulating liquid or gas neon, helium and hydrogen. Recent work has focused on environmental issues and on high-temperature superconducting motors cooled with liquid hydrogen that can be combined with fuel cells. However, to ensure smooth supply and return of the cryogenic cooling fluid, a cryogenic rotational coupling between the rotating and stationary parts is necessary. Additionally, the development of a sealing structure to minimize fluid leakage applicable to the coupling is essential. This study describes the design and performance evaluation of a non-contact sealing method, specifically a labyrinth seal, which avoids power loss and heat load caused by friction in contact sealing structures. The seal design incorporates a spiral flow path to reduce leakage using centrifugal force, and computational fluid dynamics (CFD) simulations were conducted to analyze the flow path and rotational speed. A performance evaluation device was configured and employed to evaluate the designed seal. The results of this study will be used to develop a cryogenic rotational coupling with supply and return flow paths for cryogenic applications.

• 설비공학논문집
• /
• 제22권7호
• /
• pp.460-467
• /
• 2010

In housing units constructed recently in Korea, the length of ondol coil is different in each room, so the flow rate of hot water is adjusted by setting valve opening. If the flow rate is not appropriate for heating load, the room temperature seriously deviates from the set temperature range for comfort. In particular, too small valve opening can induce a noise by cavitation. In order to adjust the valve opening, two methods by zone area and a new method by return temperature rise were modelled and simulated using TRNSYS and EES. As a result, heating energy consumption during one week was the same on three methods, but the room temperature of the new method minimally deviated from the range of set temperature with a low possibility of noise.