• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.33 no.4
• /
• pp.1-6
• /
• 2001

Today's paper industry tries to use greater amount of high yield pulp and recycled fiber and to close mill water system, which results in higher fines content and buildup of organic and inorganic contaminants in white water system. Researches are being focused to develop chemical additives that provide good retention and drainage in a closed papermaking system. A microparticle retention system consisted of cationic guar gum and anionic colloidal silica so has been developed to meet the requirements for improving machine speed and product quality. The objective of this investigation was to determine the effects of the degree of cationic guar gums, charge density and structure of anionic colloidal silica sols, and the degree of system closure on the performances of this microparticle retention system. Cationic guar gums and anionic colloidal silica sols with higher charge densities showed better retention performance. Particularly, wider maximum in retention was obtained when structure colloidal silica was used suggesting as mechanism of microparticle bridging is functioning in this system.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.4
• /
• pp.629-633
• /
• 2005

In the reversed-phase chromatography, the retention time of sample was investigated based on the molecular structure of compound. Several descriptors that were related to retention factors were selected, and then the values of descriptors were calculated with several softwares. The effect of retention factor was measured with calculated values, and the results were obtained that each descriptors of molecular structure of compound have different effect on the retention factor. Therefore, the empirical equation for seven types of descriptors considered was obtained, and it has high values of correlation coefficient. Furthermore, the experimental data and calculated values have good agreement.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.33 no.2
• /
• pp.1-7
• /
• 2001

Use of high yield pulp and recycled fiber as raw materials and water system closure result in higher fines content and buildup of organic and inorganic contaminants in white water. These are detrimental for the effectiveness of chemical additives including retention aids. Thus it is imperative to employ a retention systems that maintains its efficiency in closed papermaking system for reducing fresh water consumption. The performance of four different microparticle retention systems including cationic polyacrylamide (C-PAM)/bentonite, highly charged cationic starch (HCS)/silica, C-PAM/micropolymer, cationic guar gum (CGG)/silica was evaluated and compared at three different levels of papermaking system closure. Buildup of detrimental substances in a closed white water system increased cationic demand and finally reduced the performance of retention systems. Cationic starch and guar gums maintained their effectiveness in retention in closed white water systems contaminated with anionic trashes because of their structural rigidity and hydrogen bonding ability. Particularly, cationic guar gums, due its stiffness of molecular structure, appeared perform better than catinonic starch.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.40 no.3
• /
• pp.1-8
• /
• 2008

The efficiency of retention systems including compozil-G, hydrocol, compozil-S, and micropolymer under highly closed papermaking system was evaluated using contaminated white waters prepared in the laboratory. Compozil-G and compozil-S performed better in retention than hydrocol and micropolymer systems. This suggested that stronger hydrogen bonding between fiber and guar gum or starch was formed to give stronger flocculation and better retention. Especially compozil-G outperformed compozil-S in retention, and this indicated the presence of stronger interaction between guar and cellulose fibers probably due to their similarity in chemical structure. Two compozil retention systems decreased the cationic demand and COD more effectively than hydrocol and microparticle systems. In particular, compozil-G that uses guar gum was highly effective in decreasing anionic trashes at low dosage.

• Journal of the Korean Society for Library and Information Science
• /
• v.40 no.4
• /
• pp.199-219
• /
• 2006

Retention schedule is the most essential tool for accurate documentation of government activities. The purpose of this study is to provide a guideline for redesigning retention schedules to support systematic documentation of government activities, that can replace the existing retention schedule ('bunryukijunpyo'). This present paper begins with articulating the role of retention schedules in life cycle management of records based on ISO 15489. And it compares and analyses 'disposal authorities' of Australia, 'records schedules' of United States. and the existing records retention schedules of Korea, in terms of types, structure and components of retention schedules. Based on these analyses, it suggests directives to redesign the retention schedules at the state level.

• Architectural research
• /
• v.4 no.1
• /
• pp.45-52
• /
• 2002

Selection procedures of earth retention systems are increasingly complex and directly related to the serviceability of the retaining structure selection systems since significant changes in earth retention technology motivates the review of design, and selection processes of earth retaining structures. Collection and classification of retaining structure selection knowledge are key issues because two expert groups, geotechnical and structural engineers, are mainly involved in the retaining structure selection. The course of natural tendency of expert knowledge are investigated considering the decision factors. The decision factors for selecting retaining structures are divided into four categories: application of the structure, and spatial, behavior, and economic constraints.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.9
• /
• pp.1265-1268
• /
• 2003

The estimation of retention factors by correlation equations with physico-chmical properties maybe helpful in chromatographic work. The physico-chemical properties were water solubility (S), hydrophobicity (P), total energy ($E_t$), connectivity index 1 ($^1{\chi}$), hydrophilic-lipophlic balance (x) and hydrophilic surface area (h) of isoflavones. The retention factors were experimentally measured by RP-HPLC. Especially, the empirical regulations of water solubility and hydrophobicity were expressed in a linear form. The equation between retention factors and various physico-chemical properties of isoflavones was suggested as $k = a_0 + a_1\;log S + a_2log\;P^Q + a_3(E_t) + a_4(^1{\chi}) + a_5(x) + a_6(h)$, and the correlation coefficients estimated were relatively higher than 0.95. The empirical equations might be successfully used for a prediction of the various chromatographic characteristics of substances, with a similar chemical structure.

• Journal of the Korean Chemical Society
• /
• v.38 no.2
• /
• pp.108-121
• /
• 1994

The retention indices of branched-chain alkane, benzene ring, alcohol, amine, ketone, aldehyde and cyclic compounds were measured at 150, 180 and $210^{\circ}C$ on OV-1701 and OV-1 capillary columns. The group retention factors (GRF) of the substituents and the st` ructure retention factors (SRF) of the molecular structure change are derived from the retention indices of reference compounds and series of homologues. The $GRF_f$ equation of `f'th substituent is $GRF_f\;=\;I_{obs}-(100Z + \sum\limits_{i{\neq}f}GRF_i$ + {\sum}$SRF_i$)and the SRFf equation of `f'th molecular structure group is $SRF_f\;=\;I_{obs}-(100Z + {\sum}GRFi + \sum\limits_{i{\neq}f}SRF_i$). The predicted retention indices for those compound were in agreement, within the error of $\pm2$ and $\pm3%$, with the observed values that were obtained using the OV-1701 and OV-1 capillary column, respectively. The $\Delta$ xi of the substituents and $\Delta$ yi of the molecular structure change according to temperature change are derived from the $\Delta'/^{\circ}C$ of reference compounds and series of homologues. The $\Delta$ xi equation of the `f'th substituent is ${\Delta}x_f = {$\Delta}'/^{\circ}C+ \sum\limits_{i{\neq}f}\Delta$ xi + {\sum}{\Delta}yi\;and\;{\Delta}yi$ equation of the `f'th molecular structure group is ${\Delta}y_f$ = {\Delta}'/^{\circ}C+{\sum}{\Delta}xi +\sum\limits_{i{\neq}f}{\Delta}yi$. The predicted $\Delta'/^{\circ}C$ for these compounds were in agreement, within the error of ${\pm}18%$ and 17%, with the observed values that were obtained using the OV-1701 and OV-1 capillary column, respectively.

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.12
• /
• pp.1171-1176
• /
• 2014

Oil retention experiments were conducted and the performance was characterized for electrochemically etched stainless steels. The 304 stainless steels were electrochemically etched in dilute Aqua Regia to form porous structures. The structures were also hierarchical, which provides very large area for oils to adhere. Also the structures had deep valleys, which act as reservoir and are able to resist against oil-detaching forces. Several commercial oils were dispensed to characterize oil retention properties via rotating disk experiment method. The results showed that the etched surfaces have superior oil retention performance in every conditions. Also the retention enhancement ratio went particularly higher as the environments became more severe. This surface modification technique could be applied to other steel products for pretreatments of various kinds of coatings.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.1 no.1
• /
• pp.1-14
• /
• 2001

Current status and prospects of FET-type FeRAMs (ferroelectric random access memories) are reviewed. First, it is described that the most important issue for realizing FET-type FeRAMs is to improve the data retention characteristics of ferroelectric-gate FETs. Then, necessary conditions to prolong the retention time are discussed from viewpoints of materials, device structure, and circuit configuration. Finally, recent experimental results related to the FET-type memories are introduced, which include optimization of a buffer layer that is inserted between the ferroelectric film and a Si substrate, development of a new ferroelectric film with a small remnant polarization value, proposal and fabrication of a 1T2C-type memory cell with good retention characteristics, and so on.