• 펄프종이기술
• /
• 제29권4호
• /
• pp.53-63
• /
• 1997

Most cellulose resources come from the higher plants, but bacteria also synthesize same cellulose as in plants. Many scientists have been widely studied on the bacterial cellulose, the process development, manufacturing, even marketing of cellulose fibers. The bacterial celluloses are very different in its physical and morphological structures. These fibers have many unique properties that are potentially and commercially beneficial. The fine fibers can produce a smooth paper with enchanced its strength property. But there gave been few reports on the mechanical properties of the processing of bacterial cellulose into structural materials. This study were performed to elucidate the mechanical properties of sheets prepared from bacterial cellulose. Also reinforcing effect of bacterial cellulose on the conventional pulp paper as well as surface structures by scanning electron microscopy were discussed. Paper made from bacterial cellulose is 10 times much stronger than ordinary chemical pulp sheet, and the mixing of bacterial cellulose has a remarkable reinforcing effect on the papers. Mechanical strengthes were increased with the increase of bacterial cellulose content in the sheet. This strength increase corresponds to the increasing water retention value and sheet density with the increase of bacterial cellulose content. Scanning electron micrographs were shown that fine microfibrills of bacterial celluloses covered on the surfaces of hardwood pulp fibers, and enhanced sheet strength by its intimate fiber bonding.

• 지질공학
• /
• 제13권1호
• /
• pp.29-50
• /
• 2003

광양 폐 금-은 광산지역의 소규모 하천(초남리천과 사곡리천)에 흐르는 산성광산폐수의 수질 특성을 환경지구화학적 방법을 이용하여 조사하고 비교 연구하였다. 중금속(카드뮴, 구리, 납, 아연) 오염은 초남리천에서 훨씬 심한 것으로 나타난 반면, 용존 알루미늄과 철 함량은 오히려 사곡리천에서 높았는데, 두 하천간의 이러한 차이는 광산폐수의 기원물질, 즉 광석광물의 함량과 특성이 서로 다르기 때문인 것으로 판단된다. 두 하천에서 흐르는 산성광산폐수의 자연정화 기작에 대해 고찰하여 보았다. 주로 단일하천으로 이루어진 초남리천의 경우, 석회석을 사용하여 광산폐수를 정화시키는 소규모의 소택지가 조성되어 있어 소택지 내에서의 pH 증가에 따른 중금속의 흡착과 공침에 의해 중금속이 제거되고 있다. 초남리천에서 채취한 적황색 침전물에 대하여 XRD, SEM-EDS. EPMA 분석 및 화학적 분해법을 이용한 분석 결과, 적황색 침전물은 대부분 침철석으로 구성되어 있으며 알루미늄, 망간, 구리, 아연 등이 부화되어 있음을 확인하였다. 따라서 이들 금속들은 주로 적황색 침전물의 생성에 수반된 흡착이나 공침과 같은 지구화학적 반응에 의해 제거되는 것으로 판단된다. 한편, 소택지의 중금속 제거능은 계절적으로 변화하는 하천의 유량에 의해 영향을 받고 있다. 반면, 사곡리천의 경우에는 오염되지 않은 여러 지류와의 혼합에 수반된 pH 증가에 따라 철수산화물이 침전하면서 중금속의 제거가 일어나고 있다. 오염 하천과 비오염 지류와의 합류 지점에서 발생하는 중금속 제거의 기작은 '특성-특성도(property-property plot)'를 활용한 해석에 의해서도 뒷받침된다.

• 한국축산식품학회지
• /
• 제39권4호
• /
• pp.623-631
• /
• 2019

Tetramethylpyrazine (TMP), an alkaloid rich in Ligusticum wallichii and fermented products, possesses multiple pharmacological activities in antioxidant, antiinflammatory, and antibacterial. This study aimed to investigate the effect of TMP (15 mg/L) on the physicochemical and gelation properties of rabbit myofibrillar proteins (MPs) with/without oxidative stress. Results showed that compared to the control, oxidative stress to MPs decreased free thiol content, gel yield, whiteness, water-holding capacity, bounder water, immobilized water, and endogenous tryptophan fluorescence intensity, but increased surface hydrophobicity, dityrosine content, and free water content (p<0.01). Without oxidative stress, MPs treated with TMP increased free thiol content, whiteness, and bound water, but decreased dityrosine content and free water (p<0.05). Under oxidative conditions, all parameters were conversely affected by TMP (p<0.01). The results suggest that TMP can be an antioxidant to decrease the concern on oxidative deterioration during meat processing and storage by improving the oxidative stability, water retention, and gel forming property of rabbit MPs.

• 한국초전도ㆍ저온공학회논문지
• /
• 제12권4호
• /
• pp.20-23
• /
• 2010

In this study, the electromechanical property of REBCO coated conductor (CC) tape adopting a stainless steel substrate has been investigated. Sample was subjected to uniaxial tension and measured its mechanical properties at RT and 77 K. $I_c-{\varepsilon}_t$ relations was also studied in which the strain and stress corresponding to the 95% $I_c$ retention and reversible strain limit were measured. In addition, these results were compared to the case of conventional REBCO CC tape adopting a Hastelloy substrate. As a result, by adopting a stainless steel substrate comparable strength and good electromechanical property to Hastelloy one could be achieved.

• 한국산림과학회지
• /
• 제57권1호
• /
• pp.14-19
• /
• 1982

고수율(高收率) 설파이트 펄프제조시 생성(生成)되는 미세섬유(微細纖維)는 쇄목(碎木) 펄프제조시 생성(生成)되는 미세섬유(微細纖維)보다 더 높은 보수도(保水度)를 갖이므로 종이제조시 전체적(全體的) 혹은 부분적(部分的)으로 섬유표면(纖維表面)에 유착되어 섬유간(纖維間) 결합(結合)에 기여함으로서 종이의 강도(强度)를 증진(增進)시킨다. 반면 섬유(纖維)의 연화(軟化) 및 미세섬유(微細纖維)의 높은 팽윤성(膨潤性)은 종이의 비산란계수(比散亂係數)를 현저히 감소(減少)시킨다. 이와 같은 경향은 전처리수율(前處理收率)이 낮을수록 그리고 미세섬유(微細纖維)의 보수도(保水度)가 높을수록 현저(顯著)하다.

• 한국의류학회지
• /
• 제18권1호
• /
• pp.113-120
• /
• 1994

The Purpose of this study was to improve the moisture related properties of viscose rayon fibers. Viscose rayon filament yarns were partially etherified to make CMC fibers. CMC fibers were converted to the sodium, calcium, and ferric salt forms by an ion exchange method. The property changes of ion exchanged CMC fibers were examined. Cation contents of fibers were varied depending on the degree of substitution of CMC fibers. The strength of Na, Ca, Fe-CMC was higher than H-CMC owing to the plasticization by moisture sorption and the crosslinking by cations. The moisture regain was increased by carboxymethylation and that of Fe-CMC showed the highest value. The degree of swelling determined by the water retention value was observed to be Na-CMC > Ca-CMC > H-CMC > Fe-CMC. The solution retention value was decreased in the order . Ca-CMC > Na-CMC > H-CMC > Fe-CMC.

• Design & Manufacturing
• /
• 제9권1호
• /
• pp.27-30
• /
• 2015

The injection molding is used in more than 70% of total production of plastic products. Weld line in injection molded part is one of the defects in injection molding process. Weld line deteriorates not only appearance quality but also mechanical property. In this study, tensile strength about material such as ABS, PP, PA and PS was tested. as the results, the first result appears that weld's strength retention ratio's are 0.90, 0.84, 0.85, 0.76 and the second result apeears that weld depth decrease as processing temperature increased.

• 한국세라믹학회지
• /
• 제34권12호
• /
• pp.1261-1267
• /
• 1997

Four kids of powder admixtures(A, B, C, D) based on anhydrite were manufactured by mixing at a fixed rate of II-anhydrite, fly ash and active silica as an industrial by-product. Fluidity properties of cement paste such as mini-slump, apparent viscosity with elapsed time, as well as setting time of cement pastes of these admixtures substituted up to 11wt% of cement were compared to those of cement paste(SS) substisuted by marketed high-strength powder admixture(S). Among these powder admixtures, the fluidity of cement pastes(PA, PC) substituted by A and C powder admixtures manufactured from II-anhydrite and fly ash had an excellent property than that of cement paste substituted by marketed powder admixture and also a good fluidity-retention effect with elapsed time by adding of superplasticizer. The setting time of cement paste substituted by powder admixtures based on anhydrite slightly retarded than that of cement paste substituted by marketed powder admixture.

• 한국염색가공학회지
• /
• 제10권6호
• /
• pp.20-26
• /
• 1998

100％ viscose rayon fabric was treated with 1,2,3,4-butanetetracarboxylic acid (BTCA) by pad-dry-cure process in the presence of various catalysts. The dimensional stability, mechanical properties and hand values of fabric treated with BTCA were investigated. The ester-crosslinking reaction was influenced by the concentration of BTCA and type of catalyst. The fabric treated with BTCA was comparable or superior to that treated with conventional crosslinking agents such as dimethyloldihydroxyethyleneurea and 4,5-dihydroxy-1,3-dimethyl-2-imidazolidinone in respect of wrinkle recovery, shrinkproof property, retention of strength, and hand values. But in yellowing of fabric, the fabric treated with BTCA was inferior to that treated with conventional crosslinking agents. The fabric treated with BTCA/sodium formate was inferior to that treated with BTCA/sodium hypophosphite in respect of WRA, but had better strength retention and whiteness.

• 한국지반신소재학회논문집
• /
• 제16권4호
• /
• pp.57-66
• /
• 2017

준설 매립 부지의 최종 계획고를 얻기 위한 초기 준설 매립량과 매립두께를 결정하고 자중압밀에 소요되는 시간을 예측하기 위해 인천지역 항로 준설 시료에 대한 자중압밀시험과 공학적 특성을 분석하였다. 준설투기된 시료의 시간경과에 따른 함수비, 간극비 및 체적변화비에 관한 인자를 Yano의 경험식을 이용하여 평가하였다. 세립분 함유율이 낮은 경우 침강압밀계수의 변화폭이 작게 나타났으며, 세립분 함유율 50%에서 가장 크게 나타났다. 자중압밀에 따른 체적변화비를 이용하여 준설매립공사에 제시된 입도별 유보율의 포괄적인 측면을 보완할 수 있는 세립분 함유율에 따른 유보율을 산정하여 제시하였다.