• Title/Summary/Keyword: Retention of complete dentures

Search Result 50, Processing Time 0.029 seconds

Complete denture rehabilitation of edentulous patient using mandibular suction denture: a clinical report (완전 무치악 환자에서 하악 흡착 의치를 통한 총의치 수복 증례)

  • Lim, Seo-Ryeon;Seo, Yoon-Hee;Kim, Hyun-Young;Song, Young-Gyun;Lee, Joon-Seok
    • The Journal of Korean Academy of Prosthodontics
    • /
    • v.52 no.4
    • /
    • pp.346-351
    • /
    • 2014
  • Suction dentures enhance retention and support by forming negative pressure temporarily at the internal surface of denture base at times of swallowing and chewing because the areas surrounding the denture flanges are sealed by mobile mucosa. In this case, an 81-year-old male visited for new dentures. Considering the high expectations for retention and masticatory efficiency of dentures, fabricating complete dentures with suction dentures was planned. Preliminary impression was taken without applying pressure on retromolar pad area and diagnostic cast was fabricated. Afterwards, individual tray was made and final impression was taken, at the same time, gothic arch tracing was done to acquire centric relation and vertical dimension. Then, anatomic teeth were placed on maxilla and non-anatomic teeth were placed on mandible forming lingualized occlusion. Consequently, restoring a complete edentulous patient with complete dentures using mandibular suction denture resulted in recovering satisfying retention and function.

Neutral zone approach for rehabilitation of severely atrophic maxillary and mandibular ridges: A case report (치조제 흡수가 심한 환자에서 중립대를 이용한 총의치 수복 증례)

  • Lee, Ja-Youn;Choi, Sun-Young;Lee, Ji-Hyoun
    • The Journal of Korean Academy of Prosthodontics
    • /
    • v.54 no.4
    • /
    • pp.407-412
    • /
    • 2016
  • The neutral zone technique is an alternative approach for the construction of complete dentures on highly atrophic ridges with history of denture instability. This technique achieves two objectives. First, the teeth will not interfere with the normal muscle function, and second, the force exerted by the musculature against the denture is more favorable for stability and retention. In this case of a 78-years-old female patient with severely atrophic ridges who had been using unstable complete dentures, the neutral zone impression technique was used to increase the stability and the retention of dentures. The neutral zone for both arch was located with modeling compound. After the arrangement of artificial teeth within the neutral zone, the external impression was taken to determine the tissue surface. The final dentures showed enhanced stability and retention and the patient was satisfied with the new dentures with respect to functional and esthetic aspects.

PSYCHOLOGICAL ASPECT OF PATIENT SATISFACTION AND ACCEPTANCE OF COMPLETE DENTURES (총의치 환자 만족도에 대한 정신의학적 측면)

  • Chung, Moon-Kyu;Lee, Suk-Won
    • The Journal of Korean Academy of Prosthodontics
    • /
    • v.37 no.4
    • /
    • pp.494-505
    • /
    • 1999
  • In spite of the progress in techniques and materials of the prosthodontic rehabilitation of patients with complete edentulous arches, prosthodontists still face patients' complaints about dissatisfaction and discomfort from their dentures. In the past several decades, prosthodontists tried to find the factors that influence the patient's satisfaction with dentures. However the results are contraversial especially with the psychological factor. In this study using 'patient denture satisfaction questionnaire' and Hopkins Symptom Checklist, we tried to find the correlation between the patient's denture satisfaction and the patient's psychological aspects. 23 complete edentulous patients who have visited the Department of Prosthodontics, Yonsei University Dental Hospital from September 1998 to June 1999 for complete denture treatment were asked to complete the questionnaires 4 to 6 weeks after the upper and lower complete delivery. After the measurement of validity of the questionnaires, correlations between the patient's general satisfaction with their new upper and lower complete dentures and the other satisfaction questions including the satisfactions with esthetics, retention, mastication, speech, comfort and other people's opinion and between the patient's general satisfaction with their new upper and lower complete dentures and the 5 symptoms of Hopkins Symptoms Checklist including somatic, obsessive-compulsive, interpersonal sensitivity, depression and anxiety were analyzed. Among the several satisfaction questionnaire items, comfort with the lower denture showed highest relation to the patient's general satisfaction with dentures. However, only the anxiety scale of Hopkins Symptoms Checklist among the other symptom scales was related to the patient's general satisfaction with dentures. The two questionaires used in this study turned out to be valid means of analyzing patient's denture satisfaction and psychological status before and after the complete denture treatment.

  • PDF

A STUDY ON THE FLEXURAL BOND STRENGTH OF THE GOLD AND THE Co-Cr ALLOY TO THE DENTURE BASE RESINS (금 합금 및 비 귀금속 합금에 대한 의치상 레진의 결합강도에 관한 연구)

  • Park, Hyun-Joo;Kim, Chang-Whe;Kim, Yung-Soo
    • The Journal of Korean Academy of Prosthodontics
    • /
    • v.38 no.4
    • /
    • pp.500-509
    • /
    • 2000
  • In general, the three major oral functions of edentulous patients-mastication, phonation, esthetics-can be rehabilitated by the complete dentures, and both the resin based complete denture and the metal based complete denture are commonly used by many clinicians today. For the sake of many advantages such as the excellent thermal conductivity, low volumetric change, high strength, low risk of fracture and the better patient's adaptation, the metal based complete dentures are indicated to the several cases. But, there are common failures of these type of dentures mainly by the fracture or the debonding between the resin structures and the metal frameworks which is caused by the discrepancies of the flexural strength and the coefficient of thermal expansion. This is aggravated by the water contamination of the interface when exposed to the oral environment and results in the failure of complete denture treatment. So, the purpose of this study is to compare the bond strength and the fracture patterns of the gold alloy based and the Co-Cr alloy based complete dentures using the PMMA resins and the 4-META adhesive resins. The results of this study were as follows. 1. Both to the PMMA resin and the 4-META resin, the flexural bond strength of gold alloy is lower than that of Co-Cr alloy(P<0.05) 2. To the Co-Cr alloy, the bond strength of the 4-META resin is significantly higher than that of PMMA resin(P<0.05). 3. The flexural strength of the group with the mechanical retention form is significantly higher than that of the group without retention form(P<0.05). 4. Comparing with the other groups, the fracture patterns of the group 3 are quite different from the group 1,2,5.

  • PDF

The neutral zone approach for restoration of patient with severe mandibular ridge resorption: A case report (하악 치조제가 심하게 흡수된 환자에서 중립대 인상을 통한 총의치 수복 증례)

  • Cheol Namgung
    • Journal of the Korean Academy of Esthetic Dentistry
    • /
    • v.32 no.1
    • /
    • pp.8-15
    • /
    • 2023
  • In case with severely atrophied mandibular ridges, it may be difficult to achieve adequate retention and stability of dentures through the normal functional impression process of complete dentures. In these patients, an approach using the neutral zone raising technique may be an effective alternative. The neutral zone is defined as the area where the pressure of the tongue towards the outside of the mouth and the pressure of the cheek and lips towards the inside are balanced during the normal oral function of the muscular-nervous system. Complete dentures made through neutral zone impression not only improve retention and stability, but also provide adequate tongue space in the posterior teeth area. Additionally, food residues are reduced in the area around artificial teeth, and aesthetics are improved through appropriate facial support.

Technique for fabricating a mandibular suction denture with a plastic implant tray (임플란트용 플라스틱 트레이를 이용하여 하악 흡착의치를 제작하는 방법)

  • Lee, Ju-Hyoung
    • The Journal of Korean Academy of Prosthodontics
    • /
    • v.59 no.1
    • /
    • pp.36-42
    • /
    • 2021
  • Even though implant overdentures are preferentially recommended to mandibular edentulous patients, many patients may select conventional complete dentures due to cost and general condition. Proper retention and stability of conventional complete dentures in patients with severe alveolar bone resorption is difficult to achieve. To overcome the limitations, mandibular suction dentures with the closed mouth impression technique have been used. However, the previous technique requires the Frame cut back tray, the Centric tray, and the Gnathometer M. This article introduces a technique for fabricating a mandibular suction denture with common dental materials.

A New Impression Method Taken Simultaneously for the Complete Dentures (상하악 동시인상에 의한 새로운 총의치 제작법)

  • Cho, Jong-Mahn;Lee, Seong-Goo
    • Journal of the Korean Academy of Esthetic Dentistry
    • /
    • v.9 no.1
    • /
    • pp.20-36
    • /
    • 2000
  • The movements of oral surrounding muscles, lips, and tongue play a very important role while masticating, swallowing, and speaking. In case of the edentulous patient wearing dentures as well, every movement of the tongue can be seen almost the same as that of the dentulous jaw. The crushed food during mastication is swallowed and sent to pharynx. At this course, the contact of the posterior portion of tongue with dentures affects the stabilization of denture. The retention and stability of the complete dentures are related with buccinator muscles of buccal parts, lips in front, and tongue of the lingual sides. Strack(1946) insisted that the arrangement of artificial teeth in the same place as that of the natural dentition is the best way to maintain the stability of denture. In this report, I would like to introduce the several advantages of a new impression method taken simultaneously, and its procedures and clinical cases.

  • PDF

A CLINICAL STUDY ON THE SATISFACTION OF COMPLETE DENTURE PATIENTS (총의치 환자의 만족도에 대한 연구)

  • Kim, Hyung-Woo;Kim, Chang-Whe;Kim, Yung-Soo
    • The Journal of Korean Academy of Prosthodontics
    • /
    • v.33 no.3
    • /
    • pp.440-452
    • /
    • 1995
  • A success of complete denture prosthesis can be determined by the satisfaction degree of the dentist and the patient. There are many factors influencing on the satisfaction of the complete denture patients. The purpose of this study is to analyze the correlation between the masticatory satisfaction and clinical evaluation, and the speech satisfaction and clinical evaluation in complete denture patients. 79 patients(total 119 complete dentures) were examined in this study who were treated in Seoul National University Dental Hospital. Through clinical evaluation, 2 examiners evaluated sex, age, edentulous period, the years of having used present complete denture, the number of the previous dentures, the state of the opposite arch, retention, stability, support, occlusion, vertical dimension of the complete denture and the condition of the residual alveolar ridge. Through questionnaires concerned with mastication and speech, examiners evaluate the satisfaction degree of the patients. This study led to the conclusion that : 1. The satisfaction degree of the mastication was lower in older patients(p<0.001) and in patients whose present complete denture period was shorter(p<0.05). The satisfaction degree of the mastication in male was higher than in female patients(p<0.01). 2. The satisfaction degree of the mastication was high when the retention of the complete denture was good(p<0.05), and when the condition of the residual alveolar ridge was good(p<0.05). 3. The satisfacion degree of the speech was high when the retention of the complete denture was good(p<0.01). 4. The satisfaction degree of the mastication was higher in patients with upper and lower complete denture than in patients with single complete denture whose oppsite arch was unilateral partial denture(p<0.05).

  • PDF

Complete denture rehabilitation utilizing digital process: A case report (디지털 방식을 활용한 양악 총의치 수복 증례)

  • An, Yoojin;Lee, Younghoo;Hong, Seoung-Jin;Paek, Janghyun;Noh, Kwantae;Pae, Ahran;Kwon, Kung-Rock;Kim, Hyeong-Seob
    • The Journal of Korean Academy of Prosthodontics
    • /
    • v.60 no.4
    • /
    • pp.313-319
    • /
    • 2022
  • Complete dentures are one of the most basic treatment methods for the treatment of edentulous patients. The manufacturing process of traditional complete dentures goes through the steps of taking primary impressions, secondary impressions, jaw relation record, trying in wax denture, and final denture insertion. Multiple visits and complex manufacturing procedures are required, and errors may occur in each step. With the development of digital technology, manufacturing steps have been reduced by introducing digital technology to the denture treatment process. In the process of manufacturing dentures by introducing a digital process, a more precise work is possible using Computer-Aided Design, and it is possible to shorten the period of labor and reduce the number of visits. In this case, the anterior teeth arrangement of the patient's existing dentures was transferred to the final dentures using a digital method. After taking impression, try-in dentures were digitally fabricated and tried in the oral cavity to evaluate their retention in the oral cavity. Final dentures were manufactured by milling process. The number of visits was reduced, satisfactory retention and stability of dentures were obtained, and aesthetic recovery was achieved.

Comparative evaluation of two sets of complete dentures fabricated by digital and conventional workflow in a single patient: A case report (단일 환자에서 디지털 및 전통적인 워크플로우로 제작한 두 쌍의 총의치를 장착하여 비교평가한 증례 보고)

  • Kim, Sang Hyun;Oh, Kyung Chul;Park, Ji Man;Kim, Jee Hwan;Moon, Hong Seok
    • The Journal of Korean Academy of Prosthodontics
    • /
    • v.59 no.3
    • /
    • pp.350-358
    • /
    • 2021
  • Application of digital technology in dental treatments can simplify the treatment process and reduce patient discomfort. In regards of digital complete dentures, several commercial systems are available. However, these systems are not being routinely applied in Korea. In this case report, comparative analyses were performed regarding the two sets of complete dentures fabricated in digital and conventional workflow in a single patient. Complete dentures made with digital workflow were able to form an ideal occlusion because customized teeth were used. Compared to that, there were also limitations such as lower retention of mandibular dentures, so we would like to report this.