The Journal of Korean Academy of Prosthodontics (대한치과보철학회지)

The Korean Academy of Prosthodonitics (대한치과보철학회)
권호 표지
DOI QR코드

DOI QR Code

Technique for fabricating a mandibular suction denture with a plastic implant tray

임플란트용 플라스틱 트레이를 이용하여 하악 흡착의치를 제작하는 방법

  • Lee, Ju-Hyoung (Department of Predoctoral Clinical Education, School of Dentistry, Kyungpook National University)
  • 이주형 (경북대학교 치과대학 학생임상교육센터)
  • Received : 2020.03.23
  • Accepted : 2020.06.11
  • Published : 2021.01.29
Download PDF
⟨ Previous Next ⟩

Abstract

Even though implant overdentures are preferentially recommended to mandibular edentulous patients, many patients may select conventional complete dentures due to cost and general condition. Proper retention and stability of conventional complete dentures in patients with severe alveolar bone resorption is difficult to achieve. To overcome the limitations, mandibular suction dentures with the closed mouth impression technique have been used. However, the previous technique requires the Frame cut back tray, the Centric tray, and the Gnathometer M. This article introduces a technique for fabricating a mandibular suction denture with common dental materials.

하악 무치악 환자에게 치과용 임플란트를 이용한 피개의치가 우선적으로 추천된다. 그러나 많은 환자들은 경제적, 건강상태를 이유로 전통적인 총의치를 선택하기도 한다. 전통적인 방법으로 제작된 총의치는 치조골 흡수가 심한 환자에서 간혹 유지 및 안정에 한계를 보인다. 이런 한계를 극복하기 위해서 폐구인상법을 이용한 흡착의치가 사용되고 있다. 그러나 기존의 방법은 Frame cut back tray, Centric tray, Gnathometer M이 필요하다. 본 논문은 진료실에서 흔히 사용되는 치과재료를 이용한 하악 흡착의치 제작과정을 소개하고자 한다.

Keywords

References

  1. Douglass CW, Shih A, Ostry L. Will there be a need for complete dentures in the United States in 2020? J Prosthet Dent 2002;87:5-8. https://doi.org/10.1067/mpr.2002.121203
  2. Byun JS, Huh YH, Cho LL, Park CJ. Comparison between denture wearer's evaluation and clinician's rating for complete denture. J Korean Acad Prosthodont 2016;54:364-9. https://doi.org/10.4047/jkap.2016.54.4.364
  3. Feine JS, Carlsson GE, Awad MA, Chehade A, Duncan WJ, Gizani S, Head T, Lund JP, MacEntee M, Mericske-Stern R, Mojon P, Morais J, Naert I, Payne AG, Penrod J, Stoker GT, Tawse-Smith A, Taylor TD, Thomason JM, Thomson WM, Wismeijer D. The McGill consensus statement on overdentures. Mandibular two-implant overdentures as first choice standard of care for edentulous patients. Montreal, Quebec, May 24-25, 2002. Int J Oral Maxillofac Implants 2002;17:601-2.
  4. Eom DY, Richard L, Lee SW, Park SJ, Ahn SJ. CAD/CAM fabricated complete denture using 3D face scan: A case report. J Korean Acad Prosthodont 2017;55:436-43. https://doi.org/10.4047/jkap.2017.55.4.436
  5. Lee YH, Kwon KR, Pae A, Noh K, Paek J, Hong SJ. Rehabilitation of fully edentulous patient using Ceramill full denture system (FDS). J Korean Acad Prosthodont 2019;57:232-7. https://doi.org/10.4047/jkap.2019.57.3.232
  6. Abe J, Kokubo K, Sato K. Mandibular suction-effective denture and BPS: a complete guide. Tokyo; Quintessence Publishing; 2012.
  7. Lim SR, Seo YH, Kim HY, Song YG, Lee JS. Complete denture rehabilitation of edentulous patient using mandibular suction denture: a clinical report. J Korean Acad Prosthodont 2014;52:346-51. https://doi.org/10.4047/jkap.2014.52.4.346
  8. Abe J. Difficult-to-treat cases of edentulous patients presented by Jiro Abe. Seoul; DaehanNarae Publishing; 2015. p. 29-50.
  9. Kim YJ, Song YG. Comparative analysis of case series for the prosthetic rehabilitation of edentulous patients using suction denture. J Korean Acad Prosthodont 2019;57:389-96. https://doi.org/10.4047/jkap.2019.57.4.389
  10. Kim HA, Yun KD, Jo YJ, Yang H, Park SW, Park C. Complete denture fabrication of edentulous patient with severe alveolar bone resorption using suction mechanism: A case report. J Korean Acad Prosthodont 2020;58:130-6. https://doi.org/10.4047/jkap.2020.58.2.130
  11. Choi IH, Kim SA, Kim NH, Lee YS. Complete denture rehabilitation of edentulous patient with severe alveolar bone resorption and condyle fracture using gothic arch tracing and closed mouth impression technique: a case report. J Korean Acad Prosthodont 2020;58:145-52. https://doi.org/10.4047/jkap.2020.58.2.145
  12. Collett HA. Final impressions for complete dentures. J Prosthet Dent 1970;23:250-64. https://doi.org/10.1016/0022-3913(70)90180-0
  13. Yadav B, Jayna M, Yadav H, Suri S, Phogat S, Madan R. Comparison of different final impression techniques for management of resorbed mandibular ridge: a case report. Case Rep Dent 2014;2014: 253731.
  14. Smith ES. Vertical dimension and centric jaw relation in complete denture construction. J Prosthet Dent 1958;8:31-4. https://doi.org/10.1016/0022-3913(58)90009-X
  15. Lang BR. Complete denture occlusion. Dent Clin North Am 2004;48:641-65. https://doi.org/10.1016/j.cden.2004.03.006
  16. Strohaver RA. Comparison of changes in vertical dimension between compression and injection molded complete dentures. J Prosthet Dent 1989;62:716-8. https://doi.org/10.1016/0022-3913(89)90599-4
  17. Kim SJ, Kim SK, Noh K, Ahn SJ, Baik SH, Kim JH, Yoo DK, Kim KR, Kwon KR. Denture wearers' recognition for their oral health status, denture cleansing methods, and insurance health system. J Korean Acad Prosthodont 2018;56:287-94. https://doi.org/10.4047/jkap.2018.56.4.287
  18. Park CJ, Ko KH, Huh YH, Cho LR. Comprehensive understandings in the shape of retromolar pad and its classification based on clinical application. J Dent Rehabil Appl Sci 2019;35:64-71. https://doi.org/10.14368/jdras.2019.35.2.64
  19. Hwang HJ, Lee SJ, Park EJ, Yoon HI. Assessment of the trueness and tissue surface adaptation of CADCAM maxillary denture bases manufactured using digital light processing. J Prosthet Dent 2019;121:110-7. https://doi.org/10.1016/j.prosdent.2018.02.018
  20. Lee S, Hong SJ, Paek J, Pae A, Kwon KR, Noh K. Comparing accuracy of denture bases fabricated by injection molding, CAD/CAM milling, and rapid prototyping method. J Adv Prosthodont 2019;11:55-64. https://doi.org/10.4047/jap.2019.11.1.55