• 한국세라믹학회지
• /
• 제52권1호
• /
• pp.28-32
• /
• 2015

In this article, the influence of a hydrolyzed wheat protein retarder on the hydration process, ion concentration in liquid phase, degree of supersaturation, and crystal morphology of plaster was investigated. Furthermore, the retarding mechanism and the strength loss of gypsum were also studied by scanning electron microscopy (SEM). The results indicate that the use of the hydrolyzed wheat protein retarder for plaster achieved a better retarding effect and lower strength loss. The combination of gypsum plaster with the retarder not only decreased the plaster's early hydration rate and prolonged its setting time efficiently, but also militated against the crystal morphology of dihydrate gypsum. For example, the crystal dimensions changed little, but the proportion of needle-shaped crystals decreased. Combination with calcium ions on the surface of dihydrate gypsum crystal nuclei may form a chemisorbed layer, reduce the surface energy of the crystal nuclei, and inhibit the growth of the crystal nuclei of dihydrate gypsum. Consequently, the hydration process of building gypsum becomes greatly extended and is slowed down significantly.

• 한국세라믹학회지
• /
• 제33권3호
• /
• pp.307-312
• /
• 1996

In following addition of 0.3, -0.6, 0.8, 1.0 and 5 weight percent MgSiF66H2O studies have been made of the setting and hardening characteristics of ordinary portland cement. MgSiF66H2O retarded the setting time of ordinary portland cement and extended the induction pariod of the hydration. In ordinary portland cement the setting characteristics were drastically altered especially at high MgSiF66H2O contents. Evidence was also obtained by the formation of a KSiF6 which was very fine particle. The results wee as follows. 1. Slump was slightly decreased when MgSiF66H2O added. 2. Setting time was retarded depending on the amount of retarding agent 2 to 8 hours 3. Compressive strength was almost same or some increased in comparision with opc. 4. When MgSiF66H2O was added to cement paste K2SiF6 were formed It was fine-sized distributed uniformly in cement grain and caused retardation of cement setting.

• 한국염색가공학회지
• /
• 제32권3호
• /
• pp.150-157
• /
• 2020

Hexachloro-cyclophosphazene(HCCP), a formaldehyde-free flame retardant (FR), was steam-cured with triethanol amine(TEA) to impart durable flame-retardancy to cotton fabrics. While the HCCP treatment alone showed very limited resistance to repeated laundering cycles, the addition of TEA substantially improved the laundering durability of the FR cotton up to twenty laundering cycles. The extended washing resistance was accomplished by the increased nucleophilic substitution of unreacted P-Cl groups in HCCP by the TEA resulting in the more densely crosslinked FR networks. With increasing molar ratio of TEA to the HCCP up to 2, the flame retarding effectivity and the synergistic effectiveness improved to 2.8 and 1.8 respectively. TGA and microscale combustion calorimetry verified the pyrolysis and combustion behaviors of the FR-cotton, which showed lower maximum pyrolysis and combustion temperatures together with substantially decreased peak pyrolysis and heat release rate, synergistically yielding larger amounts of carbonaceous chars. The formaldehyde-free HCCP and TEA can be a durable FR finishing agents for cotton fabrics acting through a solid-phase flame-retarding mechanism.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.78-78
• /
• 2012

In this presentation I will review the expanding thermal plasma chemical vapour deposition (ETP-CVD) technology, a deposition technology capable of reaching ultrahigh deposition rates. High rate deposition of a-Si:H, ${\mu}c$-Si:H, a-SiNx:H and silicon nanocrystals will be discussed and their various applications, mainly for photovoltaic applications demonstrated. An important aspect over the years has been the fundamental investigation of the growth mechanism of these films. The various in situ (plasma) and thin film diagnostics, such as Langmuir probes, retarding field analyzer, (appearance potential) mass spectrometry and cavity ring absorption spectroscopy, spectroscopic ellipsometry to name a few, which were successfully applied to measure radical and ion density, their temperature and kinetic energy and their reactivity with the growth surface. The insights gained in the growth mechanism provided routes to novel applications of the ETP-CVD technology, such as the ultrahigh high growth rate of silicon nanorystals and surface passivation of c-Si surfaces.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2009년도 춘계 학술대회 제21권1호
• /
• pp.221-222
• /
• 2009

지연은 일반적으로 알려진 점도 상승에 의한 $Ca^{2+}$이온의 확산 지연에 의한 영향도 있지만 폴리머의 보호 콜로이드인 폴리 비닐 알코올의 가수분해에 의해 생성된 아세테이트 기가 $Ca^{2+}$이온과 반응하여 칼슘 아세테이트를 생성함으로 인한 $Ca^{2+}$이온의 소모에 의해 수화지연이 나타날 수도 있다는 것을 확인하였다.

• 한국세라믹학회지
• /
• 제34권2호
• /
• pp.163-170
• /
• 1997

대표적인 무기계 지연제인 규불하마그네슘(MgSiF6.6H2O)을 시멘트 수화반응시 첨가했을 때의 수화반응의 지연 효과 및 특성과 수용액 이온농도 변화 고찰하기 위하여 규불화마그네슘을 시멘트 질랴의 0.3wt%에서 5wt%까지 변화시키면서 그 영향을 연구 검토하였다. 시멘트 모르타르의 flow는 지연제의 첨가에 따라 감소하는 경향이 있으며 응결 시간은 지연제의 첨가량에 따라 지연되었다. 모르타르의 압축 강도는 지연제의 첨가량에 따라 3일, 7일까지는 지연제를 첨가하지 않은 plain mortar에 비하여 약간 낮은 강도를 나타내나, 시간이 지남에 따라 회복되어 28일이 지나면 plain 모르타르와 같은 강도를 나타낸다. 규불화마그네슘이 첨가되면 수화 초기 단계에서 시멘트로부터 용출된 알카리 이온과 반응하여 K2SiF6의 생성이 일어나며 그와 동시에 Ca++와 F++와의 반응에 따라 CaF2화합물이 생성됨을 확인하였다. 이때 생성된 K2SiF6 및 CaF2생성물의 비표면적은 대단히 컸으며 이들 물질이 수화반응 초기에 미수화 시멘트시 입자 표면에 생성되어 시멘트의 수화가 지연되는 것으로 검토된다. 또한 수화초기의 수화용액의 Ca++ 및 K+이온 농도의 저하 역시 포틀랜드 수화반응속도를 지연시켜 주는 이유가된다.

• 한국세라믹학회지
• /
• 제31권10호
• /
• pp.1107-1114
• /
• 1994

Although various theories have been presented on the mechanism of setting retardation of plaster in addition to organic admixtures. The purpose of this paper is that Hydration studies of plaster of paris in the presence of carboxylic acids under alkalinity are examined in the coordination chemistry. Setting of plaster of paris is retarded by the addition of carboxylic acids except oxalic acid. And setting of plaster of paris contained 5 wt% of Ca(OH)2 is also retarded by the addition of above-mentioned carboxylic acids. The degree of retarding effect under alkalinity is found to be a function of the number of the functional group and the length of carbon chain of carboxyl acids. These reasons are attributed to the soluble complex formation, that is calcium complex formation between calcium ion and carboxylic acids. The author's proposal was confirmed by the results of electrical conductivity measurement. The formation of calcium complex was surpported by IR spectra.

• 한국세라믹학회지
• /
• 제41권12호
• /
• pp.907-914
• /
• 2004

[ $Si-NaCl-NH_4Cl-NaN_3$ ]계에서 자전연소에 의한 Si의 질화반응기구에 대하여 알아보았다. 희석제로서 첨가된 NaCl은 질화반응 초기에 Si의 용융에 따른 Si의 성장을 억제하여 완전한 질화반응에 도움을 주는 것으로 나타났다. 또한 $NH_{4}Cl$과 $NaN_3$는 반응과정 동안 서로 분해하고 결합하여 생성물로서 NaCl을 형성하였고, 이 과정에서의 발열반응은 시편을 예열함으로써 질화반응에 도움을 주었다. 본 반응계에서 주된 질화반응기구는 액상-기상 반응기구였다. 그리고 ${\alpha}-Si_{3}N_4$의 제조를 위한 최적의 펠렛 기공도는 $67-69%\$였다.

• Applied Microscopy
• /
• 제45권3호
• /
• pp.177-182
• /
• 2015

The boiler tubes of X20CrMoV12.1 used in fossil-fired power plants were obtained and analyzed for the effect of water treatment on the steam corrosion-induced oxide scale in an effort to better understand the oxide formation mechanism, as well as pertinent method of maintenance and lifetime extension. The specimens were analyzed using various microscopy and microanalysis techniques, with focuses on the effect of water treatment on the characters of scale. X-ray diffraction analysis showed that the scales of specimens were composed of hematite ($Fe_2O_3$), magnetite ($Fe_3O_4$), and chromite ($FeCr_2O_4$). Electron backscatter diffraction analysis showed that the oxides were present in the following order on the matrix: outer $Fe_2O_3$, intermediate $Fe_3O_4$, and inner $FeCr_2O_4$. After all volatile treatment or oxygenated treatment, a dense protective $Fe_2O_3$ layer was formed on the $Fe_3O_4$ layer of the specimen, retarding further progression of corrosion.

• 한국염색가공학회지
• /
• 제34권1호
• /
• pp.1-9
• /
• 2022

The durable FR treatments such Pyrovatex and Proban have been used for cotton fibers, while the finishes involve toxic ammonia or formaldehyde release during finishing process or finished products. In this study, ecofriendly flame-retardant treatment of cotton fabrics was carried out using UV-curable formulations of Vinyl bisphosphonic acid (VBPA), Acrylaminide and Triacryloylhexahydro-1,3,5-triazine, as a monomer, a comonomer and a cross-linking agent respectively, which can introduce a cross-linked copolymer networks. With an optimal finish formulation, the flame retardancy of LOI 29.8 was maintained even after 10 laundering cycles. In TGA analysis, the DTGA peak decreased from 389℃ to 252℃ and the amount of char yield increased from 6.1% to 46.1% compared to the untreated cotton. In addition, MCC analysis showed that Peak HR and THR decreased by 59.4% and 69.2% respectively, compared to the untreated cotton. The pyrolysis and combustion behaviors of the FR-treated cotton implied a condensed-phase flame-retarding mechanism.