• Journal of Microbiology and Biotechnology
• /
• 제23권6호
• /
• pp.872-877
• /
• 2013

In a previous study, we isolated and reported a second species of the Saccharophagus genus, Saccharophagus sp. strain Myt-1. In the present study, an alginate lyase gene (algMytC) from the genomic DNA of Myt-1 was cloned and characterized. The DNA sequence fragment obtained contained an open reading frame of 1,032 bp that encoded a protein of 343 amino acids with an estimated molecular mass of 37.6 kDa and a pI of 6.60. The deduced protein, AlgMytC, had the conserved amino acid sequences (RTELREM, QIH, YFKAGVYNQ) of the polysaccharide lyase family 7. A BLAST homology search indicated that AlgMytC shared an amino acid sequence identity of 95.9% with alg7A of S. degradans 2-40. The cloned and purified AlgMytC protein showed optimal activity at $40^{\circ}C$, and retained more than 90% of its total activity even after treatment at $25^{\circ}C$ for 24 h. AlgMytC was very alkaliphilic with an optimal pH of 9.0, and more than 90% of its activity was retained in the pH range 8.5-10.0. Moreover, AlgMytC was stable over a wide pH range. The activity of AlgMytC was also stable in the presence of various detergents.

• 한국산업융합학회 논문집
• /
• 제26권5호
• /
• pp.725-731
• /
• 2023

In this study, the harmless crack size was evaluated using carburized, quenched-tempered SCM822H steel. The possibility of detecting cracks that reduce the fatigue limit by non-destructive inspection was evaluated. The conclusions obtained are as follows. The retained austenite of surface was reduced by SP. About 35% and 65% of the retained austenite on the surface were transformed into strain-induced martensite, increasing the hardness by 79HV and 122HV over the as-received material. The maximum compressive residual stresses introduced on the surfaces were -695 MPa and -688 MPa, respectively. The fatigue limit increased by 1.48 times and 1.67 times, respectively, compared to the as-received material. The harmless crack size of SP specimen was determined differently depending on the shot ball size.

• Geomechanics and Engineering
• /
• 제13권5호
• /
• pp.715-742
• /
• 2017

Earth berms are often left in place to support retaining walls or piles in order to eliminate horizontal struts in excavations of soft soil areas. However, if the excavation depth is relatively large, an earth berm-supported retaining system may not be applicable and could be replaced by a multi-bench retaining system. However, studies on multi-bench retaining systems are limited. The goal of this investigation is to study the deformation characteristics, internal forces and interaction mechanisms of the retaining structures in a multi-bench retaining system and the failure modes of this retaining system. Therefore, a series of model tests of a two-bench retaining system was designed and conducted, and corresponding finite difference simulations were developed to back-analyze the model tests and for further analysis. The tests and numerical results show that the distance between the two rows of retaining piles (bench width) and their embedded lengths can significantly influence the relative movement between the piles; this relative movement determines the horizontal stress distribution in the soil between the two rows of piles (i.e., the bench zone) and thus determines the bending moments in the retaining piles. As the bench width increases, the deformations and bending moments in the retaining piles decrease, while the excavation stability increases. If the second retaining piles are longer than a certain length, they will experience a larger bending moment than the first retaining piles and become the primary retaining structure. In addition, for varying bench widths, the slip surface formation differs, and the failure modes of two-bench retained excavations can be divided into three types: integrated failure, interactive failure and disconnected failure.

• Journal of Applied Biological Chemistry
• /
• 제60권3호
• /
• pp.249-256
• /
• 2017

The Monascus azaphilone (MAz) pigment is a well-known food colorant that has yellow, orange and red components. The structures of the yellow and orange MAz differ by two hydride reductions, with yellow MAz being the reduced form. Orange MAz can be non-enzymatically converted to red MAz in the presence of amine derivatives. It was previously demonstrated that mppE and mppG are involved in the biosynthesis of yellow and orange MAz, respectively. However, ${\Delta}mppE$ and ${\Delta}mppG$ knockout mutants maintained residual production of yellow and orange MAz, respectively. In this study, we deleted the region encompassing mppD, mppE and mppG in M. purpureus and compared the phenotype of the resulting mutant (${\Delta}mppDEG$) with that of an mppD knockout mutant (${\Delta}mppD$). It was previously reported that the ${\Delta}mppD$ strain retained the ability to produce MAz but at approximately 10% of the level observed in the wildtype strain. A chemical analysis demonstrated that the ${\Delta}mppDEG$ strain was still capable of producing both yellow and orange MAz, suggesting the presence of minor MAz route(s) not involving mppE or mppG. Unexpectedly, the ${\Delta}mppDEG$ strain was observed to accumulate fast-eluting pigments in a reverse phase high-performance liquid chromatography analysis. A LC-MS analysis identified these pigments as ethanolamine derivatives of red MAz, which had been previously identified in an mppE knockout mutant that produces high amounts of orange MAz. Although the underlying mechanism is largely unknown, this study has yielded an M. purpureus strain that selectively accumulates red MAz.

• 대한치과보철학회지
• /
• 제45권6호
• /
• pp.717-723
• /
• 2007

Statement of problem. Unreasonable distal cantilevered implant-supported prosthesis can mask functional problems of reconstruction temporarily, but it can cause serious strain and stress around its supported implant and surrounding alveolar bone. Purpose. The purpose of this study was to evaluate strain of implants supporting distal cantilevered fixed prosthesis with two different cantilevered length under distal cantilevered static load. Material and methods. A partially edentulous mandibular test model was fabricated with auto-polymerizing resin (POLYUROCK; Metalor technologies, Stuttgart, Swiss) and artificial denture teeth (Endura; Shofu inc., Kyoto, Japan). Two implants-supported 5-unit screw-retained cantilevered fixed prosthesis was made using standard methods with Type III gold alloy (Harmony C&B55; Ivoclar-vivadent, Liechtenstein, Germany) for superstructure and reinforced hard resin (Tescera; Ivoclar-vivadent, Liechtenstein, Germany) for occlusal material. Two strain gauges (KFG-1-120-C1-11L1M2R; KYOWA electronic instruments, Tokyo, Japan) were then attached to the mesial and the distal surface of each standard abutment with adhesive (M-bond 200; Tokuyama, Tokyo, Japan). Total four strain gauges were attached to test model and connected to dynamic signal conditioning strain amplifier (CTA1000; Curiotech inc., Paju, Korea). The stepped $20{\sim}100$ N in 25 N increments, cantilevered static load 8mm apart (Group I) or 16mm apart (Group II), were applied using digital push-pull gauge (Push-Pull Scale & Digital Force Gauge, Axis inc., Seoul, Korea). Each step was performed ten times and every strain signal was monitored and recorded. Results. In case of Group I, the strain values were surveyed by $80.7{\sim}353.8{\mu}m$ in Ch1, $7.5{\sim}47.9{\mu}m/m$ in Ch2, $45.7{\sim}278.6{\mu}m/m$ in Ch3 and $-212.2{\sim}718.7{\mu}m/m$ in Ch4 depending on increasing cantilevered static load. On the other hand, the strain values of Group II were surveyed by $149.9{\sim}612.8{\mu}m/m$ in Ch1, $26.0{\sim}168.5{\mu}m/m$ in Ch2, $114.3{\sim}632.3{\mu}m/m$ in Ch3, and $-323.2{\sim}-894.7{\mu}m/m$ in Ch4. Conclusion. A comparative statistical analysis using paired sample t-test about Group I Vs Group II under distal cantilevered load shows that there are statistical significant differences for all 4 channels (P<0.05).

• Food Science and Biotechnology
• /
• 제17권6호
• /
• pp.1391-1395
• /
• 2008

Leuconostoc citreum HJ-P4 is a strain isolated for kimchi fermentation with its low temperature-adapted growth feature and its high dextransucrase activity. The detailed characteristics of cell growth and dextran sucrase activities were investigated at various environmental conditions such as temperatures, pHs, salts, and raw ingredients. This strain showed almost 2-fold higher maximal cell concentration ($X_{max}$) than that of the type culture Leuconostoc mesenteroides B-512F at $10^{\circ}C$. The $X_{max}$ of the strain was maximum at pH 7 and the cell growth was inhibited by salts in a dose-dependent mode up to 7%. Addition of pepper (<6%), garlic (<10%), and ginger (<2%) in kimchi gave no inhibition effect on the growth of HJ-P4. Dextransucrase synthesized by this strain retained over 80% of its maximum activity at $10^{\circ}C$ showing a comparable cold-adapted feature to its host microbe. This culture can be used as a starter culture in the industrial kimchi production giving desirable functions and predominance at low temperature.

• 한국미생물·생명공학회지
• /
• 제19권2호
• /
• pp.140-146
• /
• 1991

Mutation experiments were performed to select the mutant of Aspergillus niger 55, which had lost almost all the ability to produce transglucosidases but retained that of high productivity of raw meal saccharifying enzyme, by means of successive induction with N-methyl-N'-nitro-N-nitrosoguanidine(MNNG), ultraviolet(UV) light, and ${\gamma}$-rays. Also, we used the mutant enrichment techniques, such as liquid culture-filtration procedure and differential heat sensitivity of conidia, in order to increase the possibility of obtaining a mutant. The glucoamylase productivity of mutant PFST-38 was 11 times higher than that of the parent strain. The mutant PFST-38 was morphologically identical to the parent strain, except for the size of conidia, the tendency to form conidia and the lenght of conidiophore. Asp. niger mutant PFST-38 apeared to be useful for the submerged production of the raw corn meal saccharifying enzyme.

• 한국미생물·생명공학회지
• /
• 제32권1호
• /
• pp.22-28
• /
• 2004

경주지역에 있는 목재 저장소의 토양으로부터 내별성 xylanase를 생산하는 호열성 세균인 DG-22 균주가 분리되었다. 형태적, 생화학적, 계통학적 연구에 근거하여 이 분리균은 Paenibacillus 속하는 종으로 판명되었다. 이 균주에서 xylanase의 생산은 성장배지에 xylan을 첨가함으로서 유도되었고 glucose또는 xylose에 의해서 억제되었다. Cellulase 활성은 탐지되지 많았다. 효소 활성을 위한 최적온도와 pH는 각각 $80^{\circ}C$와 5.0-5.5이었다. 이 조효소는 $60^{\circ}C$매서 안정하였고 $70^{\circ}C$에서는 2시간 추에도 60%의 활성을 유지하였다. 배양상등액의 zymogram 분석을 통해 22 kDa과 30 kDa 크기의 xylanase활성 band를 확인하였다

• Journal of Plant Biology
• /
• 제6권2호
• /
• pp.9-21
• /
• 1963

A mosaic diseased radish collected from the suburb of Seoul, in November, 1961 was used for studing the host range, physical properteis, purificaitiion, insect transmission, and electron microscopy. A Japanese strain of radish mosaic(RPV) was also used with Korean strain of radish mosaic (KRMV) for a comparative study. The two viruses, KRMA and RPV, were identified by the difference in host range, insect transmission and electron microscopy. The KRMA was severely infective on tobacco and Nicotiana glutinosa, while on Gomphrena globsa was immune to the virus. RPV produces necrotic local lesions on Gomphrena globosa but did not infect tobacco and N. glutinosa. Among varieties of radish, Seoul, Akamaroo, Akanagea, Koong-Joong showed more severe symptoms than Simoo, Minong, Paek-soo, which appeared to be fainly resistant. In a number of tests, it was found that the virus KRMA retained its infectivity until to a dilution of 1:2,000, heating at $58^{\circ}$ for 10 minutes, adn aging in vitro for 7 days at room temperature. The RPV was not inactivated until it was diluted to 1:2,000, heated to $56^{\circ}$, and aged for 6 days. The KRMV was readily transmitted by the aphid(Myzus persicae Sulz). The virus RPV was not transmitted by the aphid in a number of tests. Partialy purified viruses using ammonium acetate buffer, salting-out by ammonium sulfate and centrifugation of high and low speed were highly infective. Electron micrographs showed that the KRMV paticles are of spherical particles whereas the RPV particles are rod-shaped.

• Journal of Plant Biology
• /
• 제6권2호
• /
• pp.7-7
• /
• 1963

A mosaic diseased radish collected from the suburb of Seoul, in November, 1961 was used for studing the host range, physical properteis, purificaitiion, insect transmission, and electron microscopy. A Japanese strain of radish mosaic(RPV) was also used with Korean strain of radish mosaic (KRMV) for a comparative study. The two viruses, KRMA and RPV, were identified by the difference in host range, insect transmission and electron microscopy. The KRMA was severely infective on tobacco and Nicotiana glutinosa, while on Gomphrena globsa was immune to the virus. RPV produces necrotic local lesions on Gomphrena globosa but did not infect tobacco and N. glutinosa. Among varieties of radish, Seoul, Akamaroo, Akanagea, Koong-Joong showed more severe symptoms than Simoo, Minong, Paek-soo, which appeared to be fainly resistant. In a number of tests, it was found that the virus KRMA retained its infectivity until to a dilution of 1:2,000, heating at $58^{\circ}$ for 10 minutes, adn aging in vitro for 7 days at room temperature. The RPV was not inactivated until it was diluted to 1:2,000, heated to $56^{\circ}$, and aged for 6 days. The KRMV was readily transmitted by the aphid(Myzus persicae Sulz). The virus RPV was not transmitted by the aphid in a number of tests. Partialy purified viruses using ammonium acetate buffer, salting-out by ammonium sulfate and centrifugation of high and low speed were highly infective. Electron micrographs showed that the KRMV paticles are of spherical particles whereas the RPV particles are rod-shaped.