• Economic and Environmental Geology
• /
• v.38 no.2 s.171
• /
• pp.155-163
• /
• 2005

For an unbiased TF (Tansfer Function) estimations we investigate geomagnetic TF derived from ICHEON and YONGIN sites, employing RR (Remote Reference) and SNS (Signal Noise Separation) techniques. The Rh technique, which requires synchronized field variations recorded at a clean remote site, is a reliable method to minimize the bias of TF by uncorrelated noises in magnetic channels. Meanwhile, SNS technique based on the assumption of noise-free remote data can improve the signal-noise level by separating signal TF and noise TF, which is successfully applied to the environments with strong correlated noises. In this study, TF at YONGIN is analyzed using geomagnetic data from ICHEON site as a remote reference, which seem to have somewhat better data quality. The application of Rh technique reduces the bias of TF, which appears in single site robust estimation, and makes curves in the amplitude and phase of TF more smooth as frequency. Futhermore, in order to investigate noise source quantitatively, SNS technique is applied. The results of SNS suggest that dominant noise source seems to be located at western region of YONGIN. This noise source is considered to originate from railway system such as KTX and national subway. which passes through the west regions of YONGIN.

• Journal of Veterinary Clinics
• /
• v.27 no.6
• /
• pp.704-712
• /
• 2010

Porcine circovirus-2 (PCV2) has been implicated in many clinical diseases/syndromes that are now referred to as PCV-associated diseases (PCVAD). Due to significant economic losses caused by PCVAD, many swine operations have launched extensive monitoring programs for PCV2. Traditional serum sampling is, however, rather expensive and laborious, hampering effective large scale pathogen surveillance. A field-based longitudinal study was conducted to assess the utility of pen-based oral fluid sample as an alternative to serum for herd PCV2 testing. Six pens (25 pigs/pen) at each of 3 different sites were used in the study. One oral fluid and 5 random serum samples per pen were collected at 3, 5, 8, 12, and 16 weeks of age, and the sera were pooled by pen for testing. All samples were tested for PCV2 by real-time PCR and for antibodies by indirect fluorescent antibody test (for both anti-PCV2 IgG and IgA) and 3 ELISA assays (blocking ELISA, indirect ELISA, and IgG/IgM sandwich ELISA). PCV2 DNA was detected in oral fluid samples sporadically until 8 weeks and in all pens at 16 weeks. PCV2-specific IgG was detected in oral fluid samples at 3 weeks and persisted until 5 to 8 weeks in all sites. Anti-PCV2 IgG and IgA were detectable in oral fluid samples collected at 16 weeks from all of the pens at 1 site. The detection of PCV2 and anti-PCV2 antibody in oral fluid samples correlated positively with results on pooled sera, suggesting that oral fluids can be a cost-effective alternative to serum for herd monitoring of PCV2 infection.

• Research in Plant Disease
• /
• v.21 no.4
• /
• pp.273-279
• /
• 2015

Major diseases and insect pests in nursery season of strawberry were anthracnose, powdery mildew, Fusarium wilt, two-spotted spider mite, and aphids. Environmental-friendly and chemical application schedules can improve diseases and insect pests control with relatively fewer organic and chemical materials inputs compared with spray programs when it's occurred. Field experiments were performed in 2012 to 2013 according to calendar-based spray programs with environmental-friendly spray calendar (EFSC) and conventional chemical spray calendar (CSC) for controlling diseases and insect pests of strawberry plants cv, Seolhyang during the two nursery seasons. EFSC did reduce the incidence of diseases and insect pests as compared to the non-treated control. Incidence of anthracnose and powdery mildew by EFSC and CSC was similar in 2012 and 2013 seasons. In addition, occurrence of two-spotted spider mite in EFSC in 2013 was similar to those of CSC and was shown highly in early and mid-June both 2012 and 2013 seasons. Occurrence of aphid in EFSC was shown highly in early and mid-June both 2012 and 2013 seasons. These results suggest that EFSC program may be effective for controlling strawberry diseases and insect pests by using environmental-friendly organic materials.

• International Journal of Highway Engineering
• /
• v.6 no.3 s.21
• /
• pp.17-26
• /
• 2004

The in-situ California Bearing Ratio (CBR) test has been widely used for evaluating the subgrade condition in asphalt concrete pavements. However, because the in-situ CBR test is expensive and takes plenty of time for operation, it is very difficult to figure out the in-situ characteristics of subgrade strength in detail. For faster and economical operation, the Dynamic Cone Penetrometer (DCP) has been often utilized for estimating the subgrade strength in the field. The relationship between the CBR value and DCP index obtained from the DCP testing has been studied using the laboratory and in-situ testing by other foreign researchers. The objective of this study is to determine the relationship between in-situ CBR value and DCP index of the subgrade materials used in Korea. The DCP index for evaluating the strength of subgrade materials produced in Korea is presented in this paper. Research results propose the regression equation to explain the relationship between the CBR and DCP tests. The in-situ CBR values of subgrade materials range from 20 to 45% indicating the good and sound subgrade condition.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.5
• /
• pp.1066-1072
• /
• 2005

The effects of La concentration in PLZT (z/30/70) thin film prepared by sol-gel method are investigated for the NVFRAM application. As the La concentration increases, the dielectric constants at 10 kHz increase from 450 to 600, while the loss tangent and the leakage current density at 100 kV/cm decrease from 0.075 to 0.025 and from $5.83{\times}10^{-7}\;to\;1.38{\times}10^{-7}\;A/cm^2,$ respectively. In the results of hysteresis loops measured at 175 kV/cm, the remanent polarization and the coercive field decrease from 20.8 to $10.5{\mu}C/cm^2$ and from 54.48 to 32.12 kV/cm, respectively, with the increase of La concentration from 0 to $10mol\%.$ After applying for $10^9$ cycles of square pulses with ${\pm}5V$ height, the remanent polarization of the PLZT (10/30/70) thin film decreases $40\%$ from the initial state, while that of the PLZT (10/30/70) thin film decreases $64\%.$.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.2
• /
• pp.90-95
• /
• 2009

Sludge pre-treatment utilizing cavitation is one of the commercialized methods at present. Cavitation can be generated by two different methods, sonotrode and hydrodynamic principle, and there has been no direct comparison between the two methods. In this study, solubilization efficiency, changes in sludge size distribution, and the methane production potential after pre-treatment by the two methods were compared. The maximum solubilization efficiency per unit energy input with the two methods was similar, and was 302 mg ${\Delta}SCOD/g$ TS at the energy input of 0.18 kWh/L. Break-up of sludge flocs were dominant during the early period of pre-treatment, while cell disintegration continued through the pre-treatment with the increase in the number of particles with less than 1 ${\mu}m$. BMP test results indicated that the methane potential increased up to 24.3% without differences between the two pre-treatments, and the increase in methane potential did not proportional to energy input. Although the energy efficiency of the two methods was quite similar, hydrodynamic methods might be a better choice for field application considering the operation and maintenance cost, and its potential improvement in energy efficiency.

• Therapeutic Science for Rehabilitation
• /
• v.12 no.3
• /
• pp.7-18
• /
• 2023

Objective : This study aimed to confirm the research characteristics by analyzing the literature that applied the school readiness programs for children with disabilities. Methods : Studies were collected from the PubMed, Embase, Web of Science, and Research Information Sharing Service databases. The key terms were "School readiness" AND ("Occupational Therapy" OR "Rehabilitation") in English and Korean. Total eight articles were selected through the selection and exclusion criteria. Results : The programs included multi-type training, motor skill training, parent training, and mobile application training. The providers were psychologists, occupational therapists, physical therapists, speech pathologists, community workers, educators, and the psychologists who conducted most of the research. The program factors can be classified into academic function, motor function, social function, parental training, and others. Academic and social functions accounted for the largest proportion of the respondents. The intervention improved multiple skills, literacy, parenting skills, and gross fine motor function. Conclusion : This study aimed to provide basic data for school-based occupational therapy by analyzing school readiness programs for children with disabilities. Recently, interest in and research on school readiness has increased. Occupational therapists should also establish their roles in the field of school-related rehabilitation and provide various school-based occupational therapies.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.8
• /
• pp.43-54
• /
• 2006

The scope of this paper covers the applications of bender element tests in consolidation, tomography, and liquefaction. Loading and unloading time during consolidation are evaluated based on shear wave velocity. As S-wave velocity is dependent on effective stress, the loading step may be determined. However, cautions are required due to the different mechanism between the settlement and effective stress criteria. The stress history may be evaluated because the S-wave shows the cement controlled regime and stress controlled regimes. A fixed frame complemented with bender elements permits S-wave tomography The tomography system is tested at low confinement within a true triaxial cell. Results show that shear wave velocity tomography permits monitoring changes in the velocity field which is related to the average effective stress. To monitor the liquefaction phenomenon, S-wave trans-illumination is implemented with a high repetition rate to provide detailed information on the evolution of shear stiffness during liquefaction. The evolution of shear wave propagation velocity and attenuation parallel the time-history of excess pore pressure during liquefaction. Applications discussed in this paper show that bender elements can be a very effective tool for the detection of shear waves in the laboratory.

• Journal of the Korean Geotechnical Society
• /
• v.39 no.10
• /
• pp.5-18
• /
• 2023

The construction timeline for earthworks can be significantly reduced by substituting the conventional layer-by-layer compaction using a vibratory roller with single-layer compaction through the rapid impact compaction (RIC) method. Dynamic load compaction is well-suited for coarse-grained soils like sand. However, as the supply of sand, the primary reclamation material, becomes scarcer, the utilization of soil with fines is on the rise. To implement the dynamic load compaction, such as RIC, with reclaimed materials containing fines, it's imperative to determine the effective improvement depth. In this study, we assess the impact of the RIC method on the effective improvement depth for clean sand and public fill with fines, comparing field test results before and after RIC application. Our focus is on the cone resistance (q_c) as it pertains to compaction quality control criteria. In conclusion, it becomes evident that standardizing the cone resistance is vital for the quality control of various reclaimed soils with fines. We have evaluated the compaction quality control criteria corresponding to a relative density (Dr) of 70% for clean sand as Q_tn,cs = 110. As a result of this analysis, we propose new quality control criteria for q_c, taking into account the fines content of reclaimed soils, which can be applied to RIC quality control.

• The Journal of the Acoustical Society of Korea
• /
• v.43 no.2
• /
• pp.243-252
• /
• 2024

Among the Foley sound generation models that have recently begun to be studied, a sound generation technique using the Vector Quantized-Variational AutoEncoder (VQ-VAE) structure and generation model such as Pixelsnail are one of the important research subjects. On the other hand, in the field of deep learning-based acoustic signal compression, residual vector quantization technology is reported to be more suitable than the conventional VQ-VAE structure. Therefore, in this paper, we aim to study whether residual vector quantization technology can be effectively applied to the Foley sound generation. In order to tackle the problem, this paper applies the residual vector quantization technique to the conventional VQ-VAE-based Foley sound generation model, and in particular, derives a model that is compatible with the existing models such as Pixelsnail and does not increase computational resource consumption. In order to evaluate the model, an experiment was conducted using DCASE2023 Task7 data. The results show that the proposed model enhances about 0.3 of the Fréchet audio distance. Unfortunately, the performance enhancement was limited, which is believed to be due to the decrease in the resolution of time-frequency domains in order to do not increase consumption of the computational resources.