• 중소기업연구
• /
• 제31권2호
• /
• pp.85-102
• /
• 2009

기업환경의 국제화 및 세계화에 따라 국내에 진출하는 다국적기업의 수는 증가할 것으로 보이는데, 그들을 효율적으로 관리할 수 있는 적절한 수단은 별로 연구되고 있지 않은 것 같다. 다국적기업의 국제이전가격은 정교하게 설정되어 조세부담을 회피할 수 있기 때문에, 이를 관리하기 위해서는 다국적기업의 행태를 이해할 필요가 있다. 본 연구는 우리나라에 진출한 외국인 기업의 특성 및 환경적 요인이 국제이전가격의 설정방식에 미치는 영향을 확인하고자 하는데 그 목표를 두고 있다. 2004년 현재 우리나라에 미화 100만불 이상의 직접투자를 수행하고 있는 외국인 투자기업 861개 기업을 대상으로 설문조사를 시행한 결과 121개 기업이 응답하여 이를 본 연구의 분석자료로 사용하였다. 종속변수로는 국제이전가격설정방법이 시장기준 혹은 원가기준에 의거하였는지의 여부를 묻는 2원적변수를 채택하였다. 시장기준방법의 경우 객관성이 높아 세무당국이 선호하는 방법임에 비해 원가기준은 경영자의 주관적인 판단이 개입될 소지가 많아 객관성이 떨어진다는 점에서 구분되기 때문이다. 독립변수로는 법인세, 관세, 세무당국과의 관계, 세무조사가능성, 현지투자자의 지분율, 내부거래비중, 매출액 및 제품수명주기가 채택되었고, 통제변수로는 중소기업여부 및 투자자의 국적이 더미변수의 형태로 포함되었다. 분석 결과를 살펴보면 세무변수로는 법인세와 관세가 유의하게 나타났는데, 그 중요도가 높을수록 경영자에게 재량권이 있는 원가기준이전가격방식을 선호하는 것으로 나타났다. 또 세무당국과의 관계를 중요하게 평가할수록 시장기준이전가격방식을 선호하는 것으로 나타났는데, 현지 정부는 객관성이 높은 시장기준을 가장 선호하기 때문에 기업의 입장에서 이 점을 고려한 것이라 생각할 수 있다. 제품 수명주기의 성숙도가 높을수록 원가기준을 선호하는 것으로 나타났는데, 이는 제품의 성숙도가 높을수록 경쟁 때문에 현지자회사가 시장을 확보하는데 어려움을 느끼게 되므로 이를 지원하는 수단으로 원가기준을 선호하는 것으로 보인다.

• 중소기업연구
• /
• 제32권1호
• /
• pp.65-87
• /
• 2010

본 연구의 목적은 기술혁신형중소기업(이노비즈)의 건전한 성장발전을 위하여 기업의 중요한 전략적 자원으로 인식되고 있는 기술혁신능력과 기술사업화능력이 시장정보지향성을 매개로 경영성과에 미치는 영향을 분석하여 기술혁신형중소기업의 효율적인 경영관리와 정부의 정책방향에 시사점을 제공하고자 하는데 있다. 이러한 목적을 달성하기 위하여 우리나라 기술혁신형 중소기업를 대상으로 오슬로매뉴얼과 선행연구를 토대로 연구개발능력, 기술축적능력, 기술혁신체제를 기술혁신능력으로, 제품화능력, 생산화능력, 마케팅능력을 기술사업화능력으로 구성하고, 이들 요인들이 시장정보지향성을 매개 변수로 경영성과에 미치는 영향을 실증분석을 통하여 검증하였다. 연구결과에 의하면, 제품경쟁력 향상과 같은 기술의 상업적 성과와 직접적인 관련이 있는 경영성과는 기술혁신체제나 생산화능력, 마케팅능력 등의 경영관리적 측면에서의 능력이 상대적으로 큰 영향을 미치며 기술적 성과를 의미하는 신기술/신제품개발 성과는 연구개발능력, 기술축적능력, 제품화능력 등 공학적 측면에서의 능력이 상대적으로 큰 영향을 미친다는 것을 보여 주었다. 또한 시장정보지향성과 관련하여 신기술/신제품개발 등의 기술적 성공을 위해서는 조직내부에서의 정보확산 수준이 상대적으로 크게 부각되고 있고, 제품경쟁력 향상 등 상업적 성공을 이루기 위해서는 정보에 대한 반응수준이 더 크게 요구된다는 점을 함축하고 있다.

• 한국심리학회지 : 문화 및 사회문제
• /
• 제12권5호_spc
• /
• pp.45-79
• /
• 2006

필자와 공동연구자들(2002)이 선행연구에서 개발한 주관안녕척도를 사용하여 한국문화에서 주관안녕에 영향을 미치는 변인들을 알아낸 연구 결과들을 개관하고, 국내외 연구들과 비교하여 시사점을 논의하고, 장래 연구할 과제들도 제안하였다. 먼저 주관안녕에 영향을 미치는 선행요인들로 ① 개인차와 인구통계 변인들, ② 개인과정 요인들, ③ 대인과정 요인들 및 ④ 한국문화의 요인으로 사회규범에 따른 행동을 다룬 연구 결과들을 개관했다. 또한 노인을 대상으로 주관안녕이 동시점에서 신체건강의 예측에 기여하는 수준과 아울러 1년 이상이 경과한 시점에서 종단적으로 신체건강이나 생사에 어떤 영향을 미치는지도 알아냈다. 본 논문은 한국문화에서 필자와 공동연구자들이 수행한 실증연구의 결과들과 연결시켜서 주관안녕을 연구하는데 따르는 이론, 방법 및 과제들을 구체적으로 논의함으로써 장차 문화비교 연구와 아울러 국내 연구에 시사점들을 제시한데 의의가 있다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• 농업과학연구
• /
• 제5권2호
• /
• pp.93-114
• /
• 1978

본(本) 시험(試驗)은 농가(農家)에서 부업(副業)으로 면양(緬羊)과 산양(山羊)을 사육(飼育)하여 농가수입(農家收入)을 향상(向上)시킬 수 있는 방안(方案)으로 모색(摸索)하고 아울러 면(緬) 산양(山羊)의 산육성(産育性), 산모성(産毛性), 모피이용성(毛皮利用性), 생리적(生理的) 특성(特性) 및 각(各) 경제형질간(經濟形質間)의 상호관계(相互關係)를 구명(究明)하기 위하여 1977년(年) 5월(月) 5일(日)부터 1977년(年) 11월(月) 26일(日)까지 충남대학교(忠南大學校) 농과대학(農科大學) 부속동물사육장(附屬動物飼育場)과 대전근교(大田近郊)의 농가(農家)를 선정(選定)하여 양(羊)의 발육성적(發育成績), 도체성적(屠體成績), 내장중량(內臟重量), 혈액(血液) 및 혈장성분(血漿成分), 채식성(採食性), 경제성(經濟性)을 분석(分析)하고 아울러 각(各) 경제형질간(經濟形質間)의 상관(相關)을 산출(算出)하여 비교검토(比較檢討)하였다. 본(本) 시험(試驗)에서 얻어진 결과(結果)를 요약(要約)하면 다음과 같다. 1. 산육성(産肉性) 및 육질(肉質) 1) 면양(緬羊)고 산양(山羊)의 발육성적(發育成績)은 196일간(日間)을 사육(飼育)한 결과(結果), 시험개시시(試驗開始時) 평균(平均) 체중(體重) 20kg와 8kg의 2배(倍)로 각각(各各) 증가(增加)되었다. 2) 면양(緬羊)은 사사구(舍飼區)와 방목구간(放牧區間)의 증체량(增體量)에 유의적(有意的) 차이(差異)가 없었다. 3) 산양(山羊)의 사육(飼育)은 전염성(傳染性) 질병(疾病)의 오염(汚染)이 없는 공주군(公州郡) 야산지대(野山地帶)에서 발육성적(發育成績)이 양호(良好)하였다. 4) 면양(緬羊)의 18개월령(個月齡) 체척측정치(體尺測定値)에서 체고(體高)에 대(對)한 비율(比率)은 십자부고(十字部高) 103%, 체장(體長) 104%, 흉심(胸心) 44%, 흉폭(胸幅) 31%, 요각폭(腰角幅) 23%, 흉위(胸圍) 135%, 전관위(前管圍) 15%였다. 재래산양(在來山羊)은 8개월령(個月齡)에서 십자부고(十字部高) 106%, 체장(體長) 109%, 흉심(胸深) 46%, 흉위(胸圍) 122%로서 면양(緬羊)보다 십자부고(十字部高), 체장(體長)과 흉심(胸心)의 비율(比率)이 높았으나 흉위(胸圍)의 비율(比率)은 낮았다. 5) 도체성적(屠體成績)에서 면양(緬羊)은 도체율(屠體率)은 $47.52{\pm}2.27%$, 골격비율(骨格比率) $9.75{\pm}1.49%$, 두골비율(頭骨比率) $2.68{\pm}0.42%$, 피모비율(皮毛比率) $20.95{\pm}2.14%$였으며, 재래산양(在來山羊)에서는 도체율(屠體率) $45.58{\pm}5.63%$, 정육율(精肉率) $27.62{\pm}3.81%$, 내장비율(內臟比率) $34.86{\pm}4.16%$, 골격(骨格), 두골(頭骨), 피모비율(皮毛比率)이 각각(各各) $11.66{\pm}1.86%$, $3.63{\pm}1.61%$, $9.26{\pm}2.41%$이었다. 6) 한국재래산양(韓國在來山羊)을 방목사사(放牧舍飼)할 경우 생산(生産)되는 도육(屠肉)의 수분(水分), 조단백(粗蛋白), 조지방(粗脂肪), 조회분(粗灰分) 함량(含量)은 근사(近似)한 차이(差異)를 나타내었다. 또한 방목(放牧) 및 사사(舍飼)한 면양도육(緬羊屠肉)을 분석(分析)한 결과(結果) 방목구(放牧區)는 사사구(舍飼區)에 비하여 수분(水分) 및 단백질함량(蛋白質含量)이 높고 지방함량(脂肪含量)은 감소(減少)하였다. 7) 각(各) 내장(內臟)의 중량(重量)은 면양(緬羊)과 재래산양(在來山羊)이 비교적(比較的) 유사(類似)한 변화(變化) 경향(傾向)을 보였는데 간장(肝臟), 심장(心臟), 신장(腎臟), 비장(脾臟)은 비교군간(比較群間)에 유의성(有意性)이 인정(認定)되지 않았으며, 제(第)1 제(第) 2위(胃) 및 대(大), 소장(小腸)은 방목구(放牧區)가 사사구(舍飼區)에 비(比)하여 유의(有意)하게 높은 값을 나타냈고 복강내(腹腔內)의 지방량(脂肪量)은 사사구(舍飼區)가 방목구(放牧區)보다 유의성(有意性)이 인정(認定)되는 높은 값을 나타냈다. 2. 산모성(産毛性) 및 모피(毛皮) 1) 7개월간(個月間) 사육(飼育)한 면양(緬羊)의 산모량(産毛量)은 $3.88{\pm}1.02kg$였으며 산모량(産毛量)은 $9.27{\pm}1.48%$, 모속량(毛束量)) $8.47{\pm}1.00cm$ 직선모장(直線毛長) $10.63{\pm}0.99cm$, 1일(日) 모성장(毛成長)은 $0.40{\pm}0.44cm$ Crimp수(數)는 $2.78{\pm}0.40$이였다. 2) 면양모피(緬羊毛皮)를 명(明)유제하여 부위별(部位別)로 항장력(抗長力) 및 인열강도(引裂强度)를 조사(調査)한 결과(結果) 둔부(臀部)가 항장력(抗張力) $1.35kg/mm^2$ 인열력(引裂力) $2.252kg/mm^2$로서 가장 강(强)하였으며 배부(背夫), 견부(肩部)의 순위(順位)로로 항장력(抗張力) 및 인열력(引裂力)을 나타내었다. 3. 초지(草地)의 이용(利用) 및 개량(改良) 1) 재래산양(在來山羊)의 방목(放牧) 및 계목시(繫牧時)의 채식량(採食量)은 오전(午前)에 비하여 오후(午後)가 많았으며 방목(放牧) 및 계목간(繫牧間)에는 큰 차이(差異)를 나타내지 않았다. 면양(緬羊)의 방목(放牧)과 계목시(繫牧時)의 채식량(採食量)은 방목(放牧)이 계목(繫牧)보다 우수하였으며 오전9午前)에 비(比)하여 오후(午後)가 다량(多量) 채식(採食)하였다. 2) 재래산양(在來山羊)과 면양(緬羊)을 이용(利用)하여 제경조성(蹄耕造成)한 목초지(牧草地)의 정착상태(定着狀態)를 조사(調査)한 결과 재래산양구(在來山羊區)는 6025% 면양구(緬羊區)는 77.35%로서 면양(緬羊)의 이용(利用)이 우수(優秀)하였고 재래산양(在來山羊)은 방목력(放牧力)의 부족(不足)으로 제경효과(蹄耕效果)가 적었다. 4. 각(各) 경제형질(經濟形質)의 상관(相關) 1) 면양(緬羊)의 산육성(産肉性)과 여러 형질(形質)사이의 상관(相關)은 생체중(生體重)과 일당증체량간(日當增體量間)에 높은 상관(相關)을 보여 주었고 기타(其他) 형질(形質)사이에서는 별로 상관(相關)이 없었으나 흉추(胸椎)길이와 생체중(生體重), 일단증체량(日當增體量), 정육율간(精肉率間)에서는 비교적(比較的) 높은 상관(相關)이 나타나고 있다. 재래산양(在來山羊)에 잇어서는 생체중(生體重)과 일당(日當) 증체량(增體量) 사이에 높은 상관(相關)이 있었으며 도체중(屠體重)과 정육량(精肉量) 사이에도 비교적(比較的) 높은 상관(相關)이 있었으나 내장중(內臟重)과 생체중(生體重), 일당(日當) 증체량(增體量) 사이에는 부(負)의 상관(相關)을 보여주고 있다. 2) 면양(緬羊)의 산모성(産毛性) 형질(形質) 상호간(相互間)의 상관(相關)에서는 산모량(産毛量)과 생체중(生體重), 일당(日當) 증체량(增體量), 산모율간(産毛率間)에 1% 수준(水準)에서 높은 상관(相關)을 나타내고 있어 성장(成長)이 빠른 개체에 산모량(産毛量)도 많다는 것을 추정할 수 있었다. 3) 산육성(産肉性) 형질(形質)과 체척측정치(體尺測定値) 사이의 상관(相關)은 면양(緬羊)에서는 생체중(生體重), 정육중(精肉重), 내장중(內臟重)과 흉위(胸圍), 체장(體長)사이에서 제일 높았고, 도체중(屠體重), 정육중(精肉重)과 비교적(比較的) 높은 부위(部位)는 흉폭(胸幅), 흉심(胸深)이었다. 따라서 면양(緬羊)의 체척측정(體尺測定)에 중점(重點)을 두는 것이 유효(有效)할 것으로 생각된다. 재래산양(在來山羊)의 산육성(産肉性) 형질(形質)과 체척측정치(體尺測定値) 사이에는 체척부위(體尺部位)의 대부분이 산육성형질(産肉性形質)과 높은 상관(相關)을 나타내고 있으며 특히 흉위(胸圍)와 생체중(生體重), 도체중(屠體重), 정육중(精肉重), 골격비율(骨格比率)사이에서는 0.922~0.974의 높은 상관(相關)을 보여주고 있다. 한편 산육성(産肉性) 형질(形質)과 흉심(胸深), 전관위(前管威), 체장(體長)사이에도 각각(各各) 0.759~0.911, 0.759~0.909, 0.708~0.872의 비교적(比較的) 높은 상관(相關)을 나타내고 있다. 따라서 재래산양(在來山羊)에 대한 산육성(産肉性) 추정(推定)은 흉부(胸部)에 대한 c체척치(體尺値)가 상당히 큰 의의(意義)가 있을 것으로 본다. 5. 혈액상(血液像) 및 혈장성분(血漿成分) 1) 적혈구수(赤血球數)와 평균(平均) 혈색소농도(血色素濃度)는 재래산양(在來山羊)이 각각(各各) $12.93{\times}10^6/mm^3$와 36.26%에 대하여 유의성(有意性)이 인정(認定)되는 높은 값을 나타냈다. 2) 혈색소량(血色素量), 적혈구용적(赤血球容積), 평균(平均) 적혈구용적(赤血球容積) 및 평균혈색소량(平均血色素量)은 재래산양(在來山羊)이 각각(各各) 10.92g/100ml, 3.02ml/100ml, $23.40{\mu}^3$ 및 10.94pg로서 면양(緬羊)의 11.73g/100ml, 36.25ml/ml, $33.97{\mu}^3$ 및 8.43pg에 비하여 낮은 값을 나타냈는데 모두 유의성(有意性)이 인정(認定)되었다. 3) 백혈구(白血球)의 수(數)는 재래산양(在來山羊)이 $11.64{\times}10^3/mm^3$을 나타내어 면양(緬羊) $9.32{\times}10^3/mm^3$보다 유의(有意)하게 높은 값을 나타냈다. 4) 백혈구(白血球)의 감별(鑑別) 수(數)에 있어서 호염구(好鹽球)는 재래산양(在來山羊)이 임파구(淋巴球)는 면양(緬羊)이 유의(有意)학 높은 값을 나타냈으며 호염구(好鹽區), 호산구(好酸球) 및 단핵구(單核球)는 차이(差異)가 없었다. 5) 혈장중(血漿中)에 함유(含有)되어 있는 총단백질(總蛋白質)과 포도당(葡萄糖)의 양(量)은 재래산양(在來山羊)이 각각(各各) 62g/100ml와 53.6mg/100ml로서 면양(緬羊)의 5.6g/100ml와 45.7mg/100ml보다 유의(有意)하게 높은 값을 나타냈으며, 총지질(總脂質)의 양(量)은 재래산양(在來山羊)이 127.6mg/100ml로서 면양(緬羊)의 149.6mg/100ml보다 유의성(有意性)이 인정(認定)되는 낮은 값을 나타냈다. 6) 비단백질태질소화합물(非蛋白質態窒素化合物), Cholesterol, Ca, P, K, Na 및 Cl의 함량(含量)은 면양(緬羊)과 산양간(山羊間)에 차이(差異)가 없었다. 6. 경제성분석(經濟性分析) 1) 면양(緬羊)과 산양(山羊)을 196일간(日間) 사육(飼育)하였을 때 농가수익(農家收益)은 1두당(頭當) 4,000원 정도(程度)였으며 농가(農家)에서 부업(副業)으로 사육(飼育)할 수 있는 적정규모(適正規模)는 5~10두(頭)이다.

• 헤리티지:역사와 과학
• /
• 제44권4호
• /
• pp.172-205
• /
• 2011

본 연구는 종합적인 현황 조사 분석을 통해 국내 돌바둑판의 위치 및 형태 그리고 입지 유형을 파악하는 한편 주변 경물과 각자 그리고 인근의 전래지명과의 관련성 분석과 해석을 통해 암각바둑판의 본질적 특성 및 장소적 의미 그리고 문화재로서의 가치 등을 파악하고자 하였다. 바둑판에 나타난 '네모난 바둑판과 둥근 바둑돌'의 천원지방적(天圓地方的) 형상, 흑백 바둑돌로 표상되는 음양조화 그리고 하늘 회전을 표현한 361로 등은 '우주적 질서가 투사(投射)된 상징체'이다. 또한 영원성을 바탕으로 바둑 삼매경에 빠진 '귤중지락(橘中之樂)'과 '상산사호(商山四皓)' 그리고 '난가(爛柯)' 모티프는 속세를 벗어난 망우청락(忘憂淸樂)의 '위기선미(圍棋仙味)'를 통해 '인생과 자연'의 관계를 시공간적으로 일치하고자 했던 천인합일의 표상이자 우미와 소요를 추구한 고아한 풍류였다. 본 연구를 통해 확인된 돌바둑판은 총본 연구는 종합적인 현황 조사 분석을 통해 국내 돌바둑판의 위치 및 형태 그리고 입지 유형을 파악하는 한편 주변 경물과 각자 그리고 인근의 전래지명과의 관련성 분석과 해석을 통해 암각바둑판의 본질적 특성 및 장소적 의미 그리고 문화재로서의 가치 등을 파악하고자 하였다. 바둑판에 나타난 '네모난 바둑판과 둥근 바둑돌'의 천원지방적(天圓地方的) 형상, 흑백 바둑돌로 표상되는 음양조화 그리고 하늘 회전을 표현한 361로 등은 '우주적 질서가 투사(投射)된 상징체'이다. 또한 영원성을 바탕으로 바둑 삼매경에 빠진 '귤중지락(橘中之樂)'과 '상산사호(商山四皓)' 그리고 '난가(爛柯)' 모티프는 속세를 벗어난 망우청락(忘憂淸樂)의 '위기선미(圍棋仙味)'를 통해 '인생과 자연'의 관계를 시공간적으로 일치하고자 했던 천인합일의 표상이자 우미와 소요를 추구한 고아한 풍류였다. 본 연구를 통해 확인된 돌바둑판은 총 18개로 이중 강진 월남사지 돌바둑판, 양산 소한정 돌바둑판, 반룡대 돌바둑판 등 3개소(16.1%)는 이동이 가능한 석국으로 분류된 반면 방학동 돌바둑판을 비롯한 15개소(83.9%)는 자연 암반에 새긴, 원래 장소를 이탈하지 않은 암각바둑판으로 밝혀졌다. 돌바둑판의 입지조건을 유형화한 결과, 계류형 15개소(83.9%), 암봉형 3개소(16.1%)로 나타났으며 가장 높은 곳에 위치한 것은 소백산 신선봉 암각바둑판(1,389m)이었다. 총 15개 돌바둑판은 모두 500m 이하의 저산지에 입지하고 있는 것으로 보아 바둑판이 새겨진 입지는 속세와 멀지 않은 생활권의 일부였으며 모두 경관성이 탁월한 계곡 및 산봉에 입지하였다. 돌바둑판은 옛 선비들의 풍류와 밀접한 관련이 있는 것으로 추찰되는바 특히 암각바둑판은 천인합일(天人合一)의 조화를 추구하며 명산대천(名山大川)을 찾아 함께 노니는 풍류도의 정신을 전승한 것으로 파악된다. 즉 궁극적으로 바둑의 전통적인 상징성인 '은일의 매개체이자 자연귀의의 도에 다다를 수 있는 선비문화의 정수'인 동시에 유선적 취향의 도구로서 자리매김 하였음을 알 수 있다. 특징적으로 암각바둑판이 새겨진 단양 소백산 신선봉을 비롯하여 괴산 선국암, 무주 사선암, 장수 신선바위 등은 신선과 관련된 지명의 일체감이 매우 높은 것으로 미루어 보아 '신선' 바위와 암각바둑판이야말로 선계에 대한 숭배와 동경의 소통방식이 가장 함축적으로 표현된 경관대상이자 조망처로 판단된다. 한편 암각바둑판이 입지하는 장소의 입지유형 등 물리적 환경과 팔경 및 동천구곡의 설정 여부, 유학자 등의 관련 여부를 중심으로 한 '인간활동' 그리고 '상산사호' 모티프 및 '난가고사' 상징의미 등 3가지를 '장소정체성 판단을 위한 해석 틀'을 기준으로 하여 고찰한 결과, 암각바둑판 주변에 각자 되어있는 동천, 동문 등의 모티프는 주자학적 '구곡팔경'의 개념 보다는 선취적 '선유동천' 개념의 공간성 모색이 필요한 것으로 보인다. 전반적으로 계류형 암각바둑판이 조성된 공간은 유가의 은둔지향적 공간이나 선도적 은일지향적 공간으로 시대추이에 따라 습합되어 온 것으로 판단되며 산봉형의 암각바둑판은 별도로 신선 강림의 숭엄지향성이 장소정체성 지배의 중요 요인으로 평가된다. 아울러 암각바둑판이 조성된 곳을 포함하여 그 주변은 동천구곡이나 팔경의 일부로 널리 알려진 승경의 요처임이 확인되었다. 또한 선비 및 사대부 계층이 주체인 주변 각자들 중에도 신선 관련 표현어가 다수 발견됨에 따라 바둑판 조영의식의 이면에는 신선경 동경을 바탕으로 한 선도적 취향이 강하게 작용하고 있음이 확인되었다. 이와 같은 결과를 총합할 때 암각바둑판은 조선조 선비들의 은일과 운둔을 통한 자연경영의 문화 현상이 집약적으로 함축된 유산이자 전래 승경의 요처로, 명승과 같은 자연문화재로서의 가치가 탁월한 대상임이 확인되었다. 현재 남한내 17개의 돌바둑판 중에서 소백산 신선봉 암각바둑판을 비롯하여 방학동 암각바둑판, 충주 사로암 암각바둑판, 무주 사선암 암각바둑판, 양산 어곡동 반룡대 석국 등은 세월의 풍파와 사람들의 접촉으로 마모되면서 바위가 깨어지거나 바둑판 줄이 희미해지고 있다. 또한 언양 반구대 집청정 암각바둑판은 토사 매몰로 그 형체를 확인하기 어려운 상태이다. 암각바둑판은 자연과 바람의 흐름을 그대로 투영한 예술적, 문화재적 가치가 탁월한 조형물이자 선인들의 자연 사랑의 마음과 선계동경의 문화가 만나 이루어진 문화유적으로, 이에 대한 국내 분포 현황에 대한 체계적인 정밀조사와 보존관리가 시급하다고 사료된다. 18개로 이중 강진 월남사지 돌바둑판, 양산 소한정 돌바둑판, 반룡대 돌바둑판 등 3개소(16.1%)는 이동이 가능한 석국으로 분류된 반면 방학동 돌바둑판을 비롯한 15개소(83.9%)는 자연 암반에 새긴, 원래 장소를 이탈하지 않은 암각바둑판으로 밝혀졌다. 돌바둑판의 입지조건을 유형화한 결과, 계류형 15개소(83.9%), 암봉형 3개소(16.1%)로 나타났으며 가장 높은 곳에 위치한 것은 소백산 신선봉 암각바둑판(1,389m)이었다. 총 15개 돌바둑판은 모두 500m 이하의 저산지에 입지하고 있는 것으로 보아 바둑판이 새겨진 입지는 속세와 멀지 않은 생활권의 일부였으며 모두 경관성이 탁월한 계곡 및 산봉에 입지하였다. 돌바둑판은 옛 선비들의 풍류와 밀접한 관련이 있는 것으로 추찰되는바 특히 암각바둑판은 천인합일(天人合一)의 조화를 추구하며 명산대천(名山大川)을 찾아 함께 노니는 풍류도의 정신을 전승한 것으로 파악된다. 즉 궁극적으로 바둑의 전통적인 상징성인 '은일의 매개체이자 자연귀의의 도에 다다를 수 있는 선비문화의 정수'인 동시에 유선적 취향의 도구로서 자리매김 하였음을 알 수 있다. 특징적으로 암각바둑판이 새겨진 단양 소백산 신선봉을 비롯하여 괴산 선국암, 무주 사선암, 장수 신선바위 등은 신선과 관련된 지명의 일체감이 매우 높은 것으로 미루어 보아 '신선' 바위와 암각바둑판이야말로 선계에 대한 숭배와 동경의 소통방식이 가장 함축적으로 표현된 경관대상이자 조망처로 판단된다. 한편 암각바둑판이 입지하는 장소의 입지유형 등 물리적 환경과 팔경 및 동천구곡의 설정 여부, 유학자 등의 관련 여부를 중심으로 한 '인간활동' 그리고 '상산사호' 모티프 및 '난가고사' 상징의미 등 3가지를 '장소정체성 판단을 위한 해석 틀'을 기준으로 하여 고찰한 결과, 암각바둑판 주변에 각자 되어있는 동천, 동문 등의 모티프는 주자학적 '구곡팔경'의 개념 보다는 선취적 '선유동천' 개념의 공간성 모색이 필요한 것으로 보인다. 전반적으로 계류형 암각바둑판이 조성된 공간은 유가의 은둔지향적 공간이나 선도적 은일지향적 공간으로 시대추이에 따라 습합되어 온 것으로 판단되며 산봉형의 암각바둑판은 별도로 신선 강림의 숭엄지향성이 장소정체성 지배의 중요 요인으로 평가된다. 아울러 암각바둑판이 조성된 곳을 포함하여 그 주변은 동천구곡이나 팔경의 일부로 널리 알려진 승경의 요처임이 확인되었다. 또한 선비 및 사대부 계층이 주체인 주변 각자들 중에도 신선 관련 표현어가 다수 발견됨에 따라 바둑판 조영의식의 이면에는 신선경 동경을 바탕으로 한 선도적 취향이 강하게 작용하고 있음이 확인되었다. 이와 같은 결과를 총합할 때 암각바둑판은 조선조 선비들의 은일과 운둔을 통한 자연경영의 문화 현상이 집약적으로 함축된 유산이자 전래 승경의 요처로, 명승과 같은 자연문화재로서의 가치가 탁월한 대상임이 확인되었다. 현재 남한내 17개의 돌바둑판 중에서 소백산 신선봉 암각바둑판을 비롯하여 방학동 암각바둑판, 충주 사로암 암각바둑판, 무주 사선암 암각바둑판, 양산 어곡동 반룡대 석국 등은 세월의 풍파와 사람들의 접촉으로 마모되면서 바위가 깨어지거나 바둑판 줄이 희미해지고 있다. 또한 언양 반구대 집청정 암각바둑판은 토사 매몰로 그 형체를 확인하기 어려운 상태이다. 암각바둑판은 자연과 바람의 흐름을 그대로 투영한 예술적, 문화재적 가치가 탁월한 조형물이자 선인들의 자연 사랑의 마음과 선계동경의 문화가 만나 이루어진 문화유적으로, 이에 대한 국내 분포 현황에 대한 체계적인 정밀조사와 보존관리가 시급하다고 사료된다.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.

• 한국토양비료학회지
• /
• 제12권4호
• /
• pp.189-213
• /
• 1980

1. 본(本) 연구(硏究)는 우리나라의 산림토양(山林土壤)의 형태학적(形態學的) 이학적(理學的) 화학적성질(化學的性質)이 임목생장(林木生長)에 미치는 영향(影響)을 조사(調査)하여 수종별(樹種別)로 토양조건(土壤條件)의 요구(要求) 경향(傾向)을 파악(把握)하므로서 적지적수(適地適樹) 및 비배관리(肥培管理)의 기초자료(基礎資料)를 얻고자 10여년간(余年間)에 걸쳐서 자료(資料)를 수집(蒐集)하여 수량화방법(數量化方法)의 이론(理論)을 적용(適用)하여 다변량해석(多變量解析)으로 분석(分析)한 것이다. 2. 공시수종(供試樹種)인 낙엽송(落葉松)과 잣나무는 온대중부(溫帶中部)에서 온대북부(溫帶北部) 지방(地方)에 이르기까지 조림적지(造林適地)가 광대(廣大)하게 분포(分布)되고 있고 한국(韓國)의 이대(二大) 조림수종(造林樹種)으로 되고 있으나, 적지특성(適地特性)이 밝혀지고 있지않아 조림시(造林時)에 혼동(混同)하여 조림(造林)하거나 동일지위급(同一地位級)으로 취급(取級)되어 왔으며 낙엽송(落葉松) 적지(適地)에는 잣나무를 조림(造林)하여도 비교적(比較的) 생장(生長)이 양호(良好)하나 반면(反面) 잣나무 적지(適地)에 냑엽송(落葉松)을 조림(造林)할 경우(境遇) 생장(生長)은 양호(良好)하다고는 할 수 없다. 이러한 차이(差異)에 대(對)하여 토양형태학적요인(土壤形態學的因子), 토양(土壤)의 이화학적인자(理化字的因子)가 임목생장(林木生長)에 어떻게 영향(影響)하는 것인가를 Computer를 이용(利用)하여 토양인자(土壤因子)를 추적(追敵)하여 보았다. 3. 조사(調査)된 임분(林分)은 인공조림지(人工造林地)의 성림지(成林地)로서 낙엽송(落葉松) 294plot 잣나무 259plot에서 우세목(優勢木)의 표준목(標準木)을 벌채(伐採)하여 수간석해(樹幹析解)에 의(依)하여 지위지수(地位指數)를 결정(決定)하고 당해임지(當該林地)에서 토양단면조사(土壤斷面調査)를 실시(實施)하고 층위별(層位別)로 토양시료(土壤試料)를 채취(採取)하여 토양(土壞)의 이화학적성질(理化學的性質)을 분석(分析)하여 수종별(樹種別)로 임지생산력(林地生産力) 구분표(區分表)를 만들어 토양(土壤)의 물리성(物理性) 화학성(化學性) 및 이화학성(理化學性)과 임목생장(林木生長) 관계(開係)를 구명(究明)하였다. 4. 토양(土壤)의 물리적(物理的) 요인(要因)과 임목생장(林木生長) 관계(開係)의 순위(順位)는 낙엽송(落葉松)에서는 퇴적양식(堆積樣式), 토심(土深), 토양수분(土壤水分), 표고(標高), 지형(地形) 토양형(土壤型) A층(層)의 두께, 견밀도(堅密度), 유기물함량(有機物含量), 토성(土性), 기암(基岩) 석력함량(石礫含量), 방위(方位), 경사(傾斜) 등(等)의 순위(順位)이며 잣나무는 토양형(土壤型), 견밀도(堅密度), 기암(基岩), 방위(方位) A층(層)의 두께 토양수분(土壞水分) 표고(標高) 지형(地形) 퇴직양식(堆積樣式) 토심(土深) 토성(土性) 석력함량(石礫含量) 경사등(傾斜等)의 순(順)이였다. 5. 토양(土壞)의 화학적요인(化學的要因)과 임목생장(林木生長) 관계(開係)의 순위(順位)는 낙엽송(落葉松)에서는 염기포화도(鹽基飽和度) 토양유기물(土壤有機物) 석회(石灰), C/N율(率) 유효인산(有效燐酸) pH 치환성가리(置換性加里) 전질소(全窒素) 고토(苦土) 양(陽)ion치환능력(置換能力) 염기총량(나토륨 등(等)의 순위(順位)이며 잣나무는 유효인산(有效燐酸) 염기총량(전질소(全窒素) 나토륨 C/N율(率) pH, 석회(石灰) 염기포화도(鹽基飽和度) 토양유기물(土壤有機物) 치환성가리(置換性加里) 양(陽)ion 치환능력(置換能力) 고토(苦土) 등(等)의 순(順)이였다. 6. 토양(土壤)의 이화학성(理化學性)과 임목생장(林木生長) 관계순위(關係順位)는 낙엽송(落葉松)에서는 토심(土深) 퇴적양식(堆積樣式) 토양수분(土壞水分) pH 지형(地形) 토양형(土壤型) 표고(標高) 전질소(全窒素) 견밀도(堅密度) 유효인산(有效燐酸) 토성(土性) A층(層)의 두께 염기총량(치환성가리(置換性加里) 염기포화도(鹽基飽和度) 등(等)의 순위(順位)이며 잣나무는 토양형(土壤型) 토양견밀도(土壤堅密度) 방위(方位) 유효인산(有效燐酸) A층(層)의 두께 치환성가리(置換性加里) 토양수분(土壞水分) 염기총량 표고(標高), 토심(土深) 염기포화도(鹽基飽和度) 지형(地形) 전질소(全窒素) C/N율(率) 최적양식(堆積樣式) 등(等)의 순위(順位)이였다. 7. 산림토양(山林土壤)의 물리적성질(物理的性質)과의 중상관관계(重相關關係)에서는 낙엽송(落葉松) 0.9272 잣나무 0.8996이며 토양(土壤)의 화학적성질(化學的性質)은 낙엽송(落葉松) 0.7474 잣나무 0.7365이였다. 이상(以上)과 같이 토양(土壤)의 물리적성질(物理的性質)과 임목생장관계(林木生長關係)는 토양(土壤)의 화학적성질(化學的性質) 보다는 상관성(相關性)이 높은 것으로 나타났으나 토양(土壤)의 화학적(化學的) 제인자(諸因子)에 처한 표시방법(表示方法)이 미흡(未洽)한 것이라고 사료(思料)되며 토양(土壤)의 화학적성질(化學的性質)이 물리적성질(物理的性質) 못지않게 중요(重要)한 것이라는 것을 입정하기에 이르렀다. 산림토양(山林土壞)의 형태학적(形態學的) 및 물리적(物理的) 중요인자(重要因子)와 토양(土壤) 화학적(化學的) 중요인자(重要因子)를 발췌(拔萃)한 산림토양(山林土壤)의 이화학적성질(理化學的性質)과 임목생장(林木生長)과의 중상관관계(重相關關係)는 낙엽송(落葉松) 0.9434이고 잣나무 0.9103으로서 가장높은 상관성(相關性)을 나타냈다. 8. 편상관계수(偏相關係數)에서 나타난 것과 같이 낙엽송(落葉松)은 잣나무보다 토심(土深)이 깊어야하며 퇴적양식(堆積樣式)에 있어서도 붕적토(崩積土) 포행토(匍行土)이어야하며 토양건습도(土壤乾混度)에서도 적윤지(適潤地) 내지(乃至) 습윤지(混潤地)를 요구(要求)하고 있으며 pH5.5~6.1을 요구(要求)하며 전질소(全窒素)(T-N) 토성(土性) 및 토양양료(土壞養料)도 낙엽송(落葉松)이 잣나무보다 훨씬 많은 토양조건(土壤條件)을 요구(要求)하고 있다. 즉(卽) 토심(土深) 퇴적양식(堆積樣式) 지형(地形)의 기복(起伏) 토양건습도(土壤乾混度) pH N 표고(標高) 토성등(土性等)이 낙엽송(落葉松)과 잣나무 적지(適地) 구분(區分)의 유효(有效)한 지표(指標)가 되며 토양형(土壤型) 토양견밀도(土壤堅密度)는 식재환경(植載環境)의 변이폭(變異幅)이 넓으므로 지표성(指標性)은 있으나 낮다고 할 수 있다. 적지판별(適地判]別)은 낙엽송(落葉松)은 토심(土深) 퇴적양식(堆積樣式) 지형(地形) 토양(土壤) 수분(水分) pH 토양형(土壤型) N 토성등(土性等)이 생장(生長)을 도모(圖謀)하는 지표인자(指標因子)인데 반(反)하여 잣나무는 토양형(土壤型) 토양견밀도(土壤堅密度) 유효인산(有效燐酸) 치환성가리(置換性加里) 등(等)이 생장(生長)을 도모(圖謀)하는 유효(有效)한 요인(要因)이였다. 토양양료(土壤養料)에 대(對)하여도 일반적(一般的)으로 잣나무 보다 낙엽송(落葉松)이 요구도(要求度)가 크게 나타나고 있으나 $K_2O$에 대(對)하여서만 잣나무가 낙엽송(落葉松)보다 많이 요구(要求)하고 있다. 9. 지금(只今)까지 임목생장(林木生長)에 크게 영향(影響)을 미치는 것은 산림(山林) 토양(土壤)의 물리적성질(物理的性質)이라고 하였으나 본(本) 연구결과(硏究結果) 토양(土壤)의 화학적성질(化學的性質)도 물리적성질(物理的性質) 못지 않게 매우 중요(重要)한 임목생장(林木生長) 요인(要因)이 된다는 것을 Computer를 이용(利用) 추적(追跳)하여 입정하였으며 아울러 도래(徒來) 낙엽송(落葉松)과 잣나무 적지(適地) 특성(特性)을 구명(究明)하였다.

• 마케팅과학연구
• /
• 제19권4호
• /
• pp.32-43
• /
• 2009

信任在心理学, 经济学, 社会学中已被广泛研究, 其重要性不仅在市场营销中被强调, 在一般商业原则中也被强调. 供应商和买家之间的关系与过去不同, 过去的关系需要相当大的私人网络优势, 并可能涉及不道德的商业行为. 而在以工业营销成功的为核心的二十一世纪激烈的全球竞争中, 供应商和买家之间的关系是伙伴关系. 在相互合作的高级别信任的基础上, 通过交换的关系, 这会给买家和供应商带来长期的利益, 竞争力增强和交易成本的降低以及其他福利. 尽管现有的研究有信任的重要性, 但是在购买与供应关系中却忽视了信任的作用, 也没有系统地分析信任对关系的影响. 因此, 深入研究, 确定买家和商业服务供应商之间信任和关系绩效之间的联系是绝对需要的. 本研究中的商业服务, 包括那些支持制造业, 正作为下一代经济增长的引擎而吸引着人们的注意. 韩国政府已选择其作为制造业发展的战略领域. 由于商业服务开放市场的需求日趋激烈, 商业服务业的竞争力应该比以往得到更多的提倡. 本研究的目的是探索相互信任对买家和供应商之间的关系绩效的影响. 具体来说, 本研究在商业服务交易中提出了一个关于信任-关系绩效的理论模型, 并实证检验根据模型而提出的假设. 这项研究表明, 研究结果有战略意义. 本研究通过多种方法收集经验数据. 这些方法包括通过电话, 邮件和面试. 作为样本的公司是在韩国供应和购买商业服务的以知识为本的公司. 本研究收集的是二进的基础数据. 每个样本公司对包括购买公司及其相应的供应公司. 并跟踪调查每个公司对的相互信任. 本研究为商业服务的买卖双方提出了信任-关系绩效的模型. 该模型由信任和它的前因和后果. 买家的信任分为对供应公司的信任和对销售人员的信任. 根据Doney 和Cannon (1997)的研究我们在个人水平和组织水平上观察信任. 通常情况下, 买方是信任的受体, 但这项研究我们建议以供应商为观察受体. 因此, 它独特的关注了双边角度的知觉风险. 换言之, 供应商和买家一样, 是信任的主体, 因为交易通常是双边的. 从这个角度来看, 供应商对买家信任和买方对供货商的信赖一样重要. 供应商的信任从某种程度上受它信任的买方公司和买家的影响. 这种使用个人水平和组织水平的信任分类是根据Doney 和Cannon (1997)的研究. 信任影响供应商的选择, 这是一项双向放的工作. 供应商们积极参与供应商选择过程中, 和买家密切的一起工作. 此外, 该过程从某种程度上受每一方信任的合作伙伴的影响. 挑选过程包括一些步骤: 识别, 信息检索, 供应商选择和绩效评价. 作为这一进程的结果, 买家和供应商都进行绩效评估, 并就这些结果为基础, 采取有形或无形的纠正行动. 本研究中使用的关于信任的测量问项是根据Mayer, Davis 和 Schoorman (1995) 以及Mayer和Davis (1999)的研究发展起来的. 根据他们的建议, 有关信任的三个方面的研究包括有能力, 善和完整. 根据商业服务这个背景我们调整了原来的问题. 例如, 如 "他/她的专业能力" 已被改为 "当我们讨论我们的产品时销售人员表现出专业能力. "这项研究使用的测量问项不同于在以往的研究中使用的问项（Rotter 1967; Sullivan和Peterson 1982; Dwyer和Oh 1987. 本研究中有关信任的前因后果的测量问项是根据Doney和Cannon (1997)的研究为基础制定的. 根据商业服务这个背景我们调整了原来的问题. 特别是, 问题被设计为对买家和供应商以解决下列因素: 信誉 (诚信, 客户服务, 良好意愿), 市场地位 (公司规模, 市场份额, 在行业中的地位), 愿意定制（产品, 过程, 交付), 信息共享(专有信息, 个人信息), 愿意保持良好关系, 认为专业, 权威授权, 买方与卖方的相似性, 以及接触频率. 作为信任相应的变量, 我们对关系绩效进行了测试. 关系绩效分为有形的影响, 无形影响, 和副作用. 有形的影响包括财务业绩;无形的影响, 包括关系的改善, 网络开发, 以及内部员工的满意度;副作用包括既不是有形影响也不是无形影响的影响. 我们联系了350对公司, 105对公司答复了我们. 由于不完整我们删除了5对公司, 105对公司被用于数据分析. 用于数据分析的回应率为30%(三百五十零分之一百零五), 高于工业营销的平均回复比率. 至于回复的公司的特点, 大多数的公司运作的商业服务既为买方(85.4%)也为供应商(81.8%). 大部分买家是做消费品贸易(76%), 而供应商的大部分(70%)是做工业品贸易. 这可能意味着买家的过程是购入材料, 部件和组件从而生产消费品成品. 正如他们对他们与合作伙伴关系的长度的报告表示, 供应商比买家有更长的商业关系. 假设1测试买方-供应方特点对信任的影响. 销售人员的专业度(t=2.070, p<0.05)和权威授权(t=2.328, p<0.05)积极影响买方对供应方的信任. 另一方面, 权威授权(t=2.192, p<0.05)积极影响供应方对买方的信任. 对买方和供应方来说, 权威授权的程度对保持对彼此的信任有关键作用. 假设2测试买卖双方关系特点对信任的影响. 买家倾向于信任供应方, 因为供应方总是尽全力联系买方(t=2.212, p<0.05)这种倾向性在供应方方面也表现得很强(t=2.591, p<0.01). 另一方面, 供应商对买方的信任是由于供应商感知买家与自己的相似性(t=2.702, p<0.01). 这一发现证实了Crosby, Evans, 和Cowles(1990)的研究结果. 他们的结果表明供应方和买方通过商务或私务的定期会议来建立彼此的联系. 假设3测试信任对感知风险的影响. 结果表明无论对买方还是供应方, 信任越低, 感知风险就越大(买方: t =-6.621, p<0.01; 供应方: t=-2.437, p<0.05). 有趣的是, 这一趋势已被证明对买方更强. 这种较高水平的感知风险的一个可能的解释是在商业服务交易中买方通常比供应方感知到更大的风险. 为此, 有必要对供应商对买方实施减少风险的战略. 假设4测试信任对信息搜集. 根据结果, 对供应方和买方, 与预期相反, 信任取决于他们合作伙伴的名誉(买方t=2.929, p<0.01; 供应方t=2.711, p<0.05). 这一发现表明, 具有良好信誉的供应商往往是可信的. 以往的经验并没有显示出任何与买家或供应商信任的重要关系. 假设5测试信任对供应方/买方选择的影响. 与买方不同, 当供应方认为以往与买方的交易重要时, 供应方倾向信任买方(t=2.913 p<0.01). 但是, 本研究并没有现实资源忠诚和买方对供应方的信任之间有显著关系. 假设6测试的是信任对关系绩效的影响. 对买方和供应方, 当财务表现被报告提高时, 他们比较信任他们的合作伙伴(买方: t=2.301, p<0.05;供应方: t=3.692, p<0.01). 有趣的是, 这种趋势在供应方比较明显. 类似的, 当竞争力被报告提高时, 买卖双方比较信任他们的合作伙伴(买方t=3.563, p<0.01 ; 供应方t=3.042, p<0.01). 对供应方来说, 当对买方信任时效率和生产力会提高(t=2.673, p<0.01). 其他绩效指标与信任没有显著关系. 这项研究结果有一定的战略意义. 首先和最重要的是, 以信任为基础的交易对供应商和买家而言都是有益的. 根据研究证实, 通过努力建立和保持相互信任可以使财务表现提高. 同样, 可以通过同样的努力提高竞争力. 第二, 以信任为基础的交易能够减少购买情况中的感知风险. 这对供应商和买家都有启示. 人们普遍认为, 在一个高度参与的采购情况中买家感知到更高的风险. 为了减少风险, 以往的研究已建议供应商制定降低风险的策略. 而本研究的特点是从双边角度关注知觉风险. 换言之, 供应商也容易存在风险, 特别是当他们提供的服务, 需要非常先进的技术, 操作和维护. 因此, 购买者和供应商必须一起密切合作解决问题. 因此, 相互信任在问题解决过程中起着关键作用. 第三, 在这项研究中发现, 销售人员有更多的授权, 他或她越被信任. 这一发现从战术角度看是非常重要的. 建立信任是一个长期的任务, 然而, 当互信尚未开发, 供应商能够通过授权销售人员做出某些决定来克服遇到的问题, 这一结论也适用于供应商.

• 한국작물학회지
• /
• 제13권
• /
• pp.1-40
• /
• 1973

수도 단간품종 육성을 위한 자료를 얻고자 Japonica 단간인 단간백망, Indica 단간인 T(N)1 그리고 Japonica$\times$Indica의 단간고정계통인 IE51의 3개품종을 단간친으로 하고 우리나라 품종인 진흥, 관옥, 및 팔굉을 모본으로 하는 관옥$\times$단간백망, 팔굉$\times$단간백망, 진흥$\times$T(N)1, 관옥$\times$T(N)1 및 관옥$\times$IE51의 5개조합의 $\textrm{F}_2$를 재배시기, 질소시용수준, 재식밀도 및 재배지를 달리한 여러 가지 환경조건하에 공시하여 간장 및 이에 관련된 형질의 유전양상과 생태적 변이를 추구하는 한편 관옥$\times$T(N)1, 진흥$\times$T(N)1 및 관옥$\times$IE51의 3개조합에 대하여는 전 공시개체수의 10%의 단간개체를 선발하여 $\textrm{F}_2$에서의 간장에 대한 선발효과를 검정하였다. 이를 요약하면 다음과 같다. 1. 유전분리 가. Japonica 단간인 단간백망은 관옥 또는 팔굉과 교잡한 $\textrm{F}_2$에서 장간 : 단간이 3:1의 분리비를 나타내었다. 따라서 단간백망의 간장은 단순열성유전인자에 비하여 지배되었음을 알 수 있었다. 나. 상기 두 조합의 $\textrm{F}_2$의 수장분리에 있어서도 장수 : 단수의 분리비는 3:1로 나타났으므로 간장지배인자가 수장 표현에도 크게 관여하는 것으로 판단되었다. 다. 초장의 경우에 있어서도 간장의 분리양상과 대동소이하였다. 라. Indica의 Semi-dwarf인 T(N)1은 진흥 또는 관옥과 교잡한 $\textrm{F}_2$에서 3:1의 단순한 간장분리를 하지 않고 연속적인 정규분포양상을 나타내는 것으로 보아 상대품종들은 T(N)1의 단간인자의 대립유전자를 가지고 있지 않는 것으로 추정된다. 특히 진흥과 교잡한 $\textrm{F}_2$의 간장분리에서는 장간방향으로 초월분리현상을 나타내었다. 수장과 초장의 분리양상은 역시 간장의 경우와 유사하였다. 마. IE51은 관옥과 교잡하였을 때 간장, 수장 및 초장의 $\textrm{F}_2$분리양상이 T(N)1의 그것과 동일하였으므로 IE51의 단간인자는 곧 T(N)1으로부터 도입된 것임을 알 수 있었다. 2. 생태적 변이 가. 일반적으로 재배시기가 늦어짐에 따라 간장 및 초장의 감소를 보였으나 수장의 변이는 비교적 적었으며 그 감소정도는 품종 또는 조합에 따라 다소 달랐다. 그러나 이들 형질의 유전분리양상은 재배시기의 영향을 거의 받지 않음을 알 수 있었다. 나. 제 3절간까지의 절간장은 대체로 간장의 분리양상과 비슷하였다. 따라서 간장의 표현은 제 3절간장까지의 역할이 비교적 중요하다고 생각된다. 다. 질소시용량의 차이가 간장 및 관련형질에 미치는 영향은 비교적 적었다. 물론 질소증시에 따라 이들 형질이 증대되는 경향은 있었으나 품종 또는 그 조합특성에 따라 그 정도가 달랐다. 라. 재식밀도를 달리할 경우 간장 및 관련형질에 미치는 영향은 적은 편 이었으며 품종과 조합에 따라 그 변이정도가 달랐다. 그러나 밀식구에서 이들 형질이 다소 증대되는 경향은 인정할 수 있었다. 마. 교배친품종들의 간장, 수장 및 초장은 저위도지방에서 재배할수록 짧아졌는데 이는 감온성반응때문인 것으로 추측되었으며 $\textrm{F}_2$ 잡종에서는 어느 조합이든 남부인 밀양에서 가장 길었는데 이는 분리된 만생화개체의 고온에 의한 생육조장에 영향한 것으로 추측되었다. 3. 선발효과 가. 간장의 유전력은 관옥$\times$T(N)1에서 92%, 진흥$\times$T(N)1에서 55% 그리고 관옥$\times$IE51에서 74%로서 조합에 따라 다르나 상당히 높은 편이었다. 나. $\textrm{F}_2$전공시개체중에서 단간쪽의 10% 개체를 선발하여 G$_3$시험에서 얻은 실제적인 간장단축량은 관옥$\times$T(N)1조합에서 20.8cm, 관옥$\times$IE51조합에서 8.7cm 그리고 진흥$\times$T(N)1조합에서 20.0cm로서 기대치에 비교적 가까운 선발효과를 얻을 수 있었다. 다. 간장의 선발이 수장에 미치는 영향은 조합에 따라 상이하였으나 관옥$\times$T(N)1조합에서는 $\textrm{F}_2$모집단에 비하여 수장의 단축을 거의 인정할 수 없었다. 이상의 결과로 보아 간장, 수장 및 초장의 생태적 변이는 비교적적은 편으로 유전적 분리 범위내에 국한되었으며 단간백망의 간장 표현에 관여하는 단순열성인자는 단수 및 소립등의 불량형질을 동반하므로서 실용가치가 없는 반면에 T(N)1의 단간인자는 이러한 불량형질과 연쇄되지 않는 장점을 가졌으므로 단간모본으로서의 활용도가 높은 것으로 인정되었다.