• KCI Concrete Journal
• /
• v.12 no.1
• /
• pp.47-56
• /
• 2000

Once a structure fabricated with mass concrete is in a form of wall such as retaining wall, side walls of a concrete caisson and so on, cracks induced by hydration heat have been known to be governed by exterior restraints which are mainly related to the boundary conditions of the structure. However, it is thought that the degree of restraints can be alleviated considerably only if a lift height of concrete placement or a panel size of the wall is selected properly before construction. As a way of minimizing thermal cracking commonly observed in massive wall-typed structure, this study aimed at evaluating effects of geometrical configuration on the temperature rise and thermal stress through parametric study. Evaluation of the effect was also performed for cement types using anti-sulphate cement, blast furnace slag cement and cement blended with two mineral admixture and one ordinary Portland Cement. so called ternary blended cement. As a result of analytical study, it was found that a lift height of concrete placement is the most important factor in controlling thermal cracking in massive wall, and the increase of a lift height is not always positive to the crack occurrence as not expected.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.18 no.1
• /
• pp.28-36
• /
• 2011

Purpose: The purpose of this study were to develop a new restraint for the intensive care units (ICU) and to investigate the application effect in comparison with a control group using existing restraints. Method: A non-equivalent control group non-synchronized quasi-experimental research design was used. The participants were 40 (control 20, experimental 20) patients who were recruited by convenience sampling the ICU of a university hospital. To avoid contamination of the experiment, data for the control group were collected prior to the experimental group. Measurement variables were edema and skin damage (redness and abrasion) at the application site, and nurses' perceived convenience in applying restraints. Results: Three days after applying the restraint, amount of edema at the application site was small and incidence of skin damage decreased in the experimental group in comparison with the control group. Also, score for application convenience measured by the nurses was higher in for the newly developed restraint than for existing restraints. Conclusion: Results indicate that the newly developed restraint has lower effects such as edema and skin damage and is more convenient compared with existing restraints, and is therefore recommended for patients in the ICU.

• Journal of Korean Critical Care Nursing
• /
• v.15 no.3
• /
• pp.62-74
• /
• 2022

Purpose : This study aimed to identify the factors influencing physical restraint-related practice among nurses working in the intensive care unit (ICU). Methods : The participants consisted of 169 ICU nurses in three general hospitals in B and U cities. Data were collected from December 2021 to January 2022 through a structured self-administered questionnaire. Demographic characteristics, physical restraint-related practice, Person-centered Critical Care Nursing (PCCN), work environment, and attitudes toward physical restraint use were measured. For data analyses, hierarchical multiple regressions were conducted using SPSS/WIN 25.0. Results : Clinical careers in the ICU, better work environments, higher PCCN levels, and more positive attitudes toward physical restraint use were associated with a better practice of physical restraints, which together explained 35.5% of the total variance of the outcome. Conclusion : Our findings suggest that to promote a safe physical restraint-related practice among ICU nurses, it is important to improve the nursing environment, prepare guidelines for applying PCCN, and provide education for endorsing positive attitudes toward the use of physical restraints.

• Steel and Composite Structures
• /
• v.41 no.5
• /
• pp.625-636
• /
• 2021

This paper examines the fire performance of uninsulated and uncoated restrained steel-concrete composite beams supplemented with externally prestressed strands through advanced numerical simulation. In this work, a sequentially coupled thermo-mechanical analysis is carried out using ABAQUS. This analysis utilizes a highly nonlinear three-dimensional finite element (FE) model that is specifically developed and validated using full-sized specimens tested in a companion fire testing program. The developed FE model accounts for nonlinearities arising from geometric features and material properties, as well as complexities resulting from prestressing systems, fire conditions, and mechanical loadings. Four factors are of interest to this work including effect of restraints (axial vs. rotational), degree of stiffness of restraints, the configuration of external prestressed tendons, and magnitude of applied loading. The outcome of this analysis demonstrates how the prestressing force in the external tendons is primarily governed by the magnitude of applied loading and experienced temperature level. Interestingly, these results also show that the stiffness of axial restraints has a minor influence on the failure of restrained and prestressed steel-concrete composite beams. When the axial restraint ratio does not exceed 0.5, the critical deflection of the composite beam is lower than that of the composite beam with a restraint ratio of 1.0.

• Journal of Auto-vehicle Safety Association
• /
• v.7 no.1
• /
• pp.13-19
• /
• 2015

Recently, Child safety has become one of the issue with Q10 dummy representing large child. The objective of this paper was to evaluate performance of three child restraints system (backless booster, high-back booster and without booster) by changing D-ring location in the rear seat. Sled tests were carried out with a Q 10 in 64km/h frontal impact. Before the dynamic sled tests, we assessed dummy positioning with difference in CRS types and height adjustment positions. Dynamic sled test results indicated that there is different performance of CRS types and belt routing. These test results will use as base line data for development CRS safety performance for Q 10.

• Proceedings of the Korean Biophysical Society Conference
• /
• 1996.07a
• /
• pp.10-10
• /
• 1996

High-resolution solution conformation of a novel conotoxin, [Pro 7,13] $\alpha$A-conotoxin $P_{IVA}$, GCCGSYPNAACHPCSCKDROSYCGQ-N $H_2$, has been determined by two-dimensional $^1$H nmr methods in combination with distance geometry calculation to rmsd values of 0.90 $\AA$ and 1.16 $\AA$ for the backbone and heavy atoms, respectively. Total of 324 NOE-derived interproton distance restraints including 33 long-range NOE restraints a well as 11 $\Phi$ and 7 $\chi$$^1$ torsion angle restraints were used for computation of structures. (omitted)d)

• Steel and Composite Structures
• /
• v.13 no.3
• /
• pp.225-238
• /
• 2012

Steel structural elements with web-tapered I cross section, are usually made of welded thin plates. Due to the nonrectangular shape of the element, thin web section may be obtained at the maximum cross section height. The buckling strength is directly influenced by lateral restraining, end support and initial imperfections. If no lateral restraints, or when they are not effective enough, the global behaviour of the members is characterized by the lateral torsional mode and interaction with sectional buckling modes may occur. Actual design codes do not provide a practical design approach for this kind of elements. The paper summarizes an experimental study performed by the authors on a relevant number of elements of this type. The purpose of the work was to evaluate the actual behaviour of the web tapered beam-columns when applying different types of lateral restraints and different web thickness.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.3
• /
• pp.526-534
• /
• 2019

This study was undertaken to identify knowledge, attitude, perception and nursing practice toward use of physical restraints, among nurses in long-term care hospitals. We further explored the impact of factors associated with nursing practice toward use of physical restraints. This was a cross-sectional descriptive study in which self-administered questionnaires were collected from 128 nurses working at 11 long-term care hospitals. Descriptive statistics, including t-test, one-way ANOVA, Welch's test, Pearson correlation coefficients and multiple regression, were applied to analyze the data collected. Our results reveal that the participants possess moderate levels of knowledge, attitude, perception and nursing practice toward use of physical restraints. Significant positive correlations were observed between nursing practice and knowledge. Multiple regression analysis showed that the factors significantly related to nursing practice and use of physical restraint were knowledge (${\beta}=0.27$, p=0.002) and attitude (${\beta}=-0.17$, p=0.044), having a total explained variance of 9.0%. The findings from this study suggest that knowledge is the strongest predictor on nursing practice toward use of physical restraints. Thus, we propose that developing and applying evidence-based educational intervention programs to reduce the use of physical restraints in long-term care hospitals are required.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.9
• /
• pp.167-174
• /
• 2019

The propose od this study was to examine the extent of using physical restraint on elderly patients (over 65 years old) and who were patients in long-term care hospitals. The data was collected, from March 3 2018 to March 29 2018, from the electronic nursing records by using a recording tool, and clinical observation was also used for assessing the use of physical restraint and the related factors. Descriptive statistics, Pearson correlation coefficients and logistic regression were then performed. The usage rate for physical restraints in long-term care hospital was 83.7%, and the most common type of physical restraint was side rails. The use of physical restraints showed a positive correlation with the fall risk scores and a negative correlation with the MMSE. Logistic regression analysis showed that the Fall Risk Score (OR=1.02, 95% CI=1.01~1.03), MMSE (OR=0.94, CI=0.88~0.99) and the use of medical devices (OR=0.80, 95% CI=0.65~0.98) were related with using physical restraints. Therefore, it was confirmed that physical restraint was used in cases of a high risk of falling, severe cognitive impairment and the use of complex and fragile medical devices to treat the patient. Clinical nursing practice should be changed so that treatment alternatives can be applied for elderly patients rather than using too many physical restraints.

• Journal of Korean society of Dental Hygiene
• /
• v.4 no.2
• /
• pp.179-191
• /
• 2004

A series of experiments were conducted on dental denture base resins for their antibiosis. They were also compared in terms of physical and mechanical characteristics, which led to the following results: 1. As for bacterial deposition, the old products showed a wide range of distribution, while those products containing C. S. had restraints. 2. Among the products containing C. S., those ones of 7, 12 and 20% all had restraints of similar size to slop further bacterial growth. In the meanwhile, the old products had only small-size restraints for bacterial growth. 3. The following changes were observed in the aspect physical characteristics: There were no significance between the old products and the C. S. products. Thus, as for compressive force, the average${\pm}$standard deviation of the old products was $27.4083.{\pm}1.7397$, and those C. S. products of 20% showed the similar $27.5600{\pm}.1976$. In addition, there were no significance between the old products and those ones containing C. S. in terms of tensile force. The tensile force of the old products was $114.5600{\pm}.8916$ in average${\pm}$standard deviation, while there was no differences among the C. S. products of 7, 12, and 20% in that matter.