• 콘크리트학회지
• /
• 제9권4호
• /
• pp.207-214
• /
• 1997

본 연구는변형구속에 의해 생기는 축력이 철근콘크리트 휨부재의 역학적 거동과 평균 균열간격에 미치는 영향을 검토하기 위해 수행되었다. 이를 위하여 변형구속 및 무구속 조건하에서의 휨강도와 휨강성을 실험으로 구하였으며, 또한 축방향 구속을 받는 휨부재의 평균 균열간격을 예측하는 식을 제안하였다.

• 여성건강간호학회지
• /
• 제10권4호
• /
• pp.291-300
• /
• 2004

Purpose: This study attempted to show the implications of obese female college students' weight control experiences and to use this as primary data for developing a nursing intervention. Method: The participants were 7 obese students who had tried losing weight at C College on Jeju Island. Their average age was 22 and BMI was $25.6kg/m^2$ on average. The data were collected from May 17th to July 6th 2004, and in-depth interviews were conducted with open-ended questions. Result: The analysis was conducted by Colaizzi's phenomenological method, and the analyzed results were categorized into 9 criteria, 22 theme clusters and 50 themes. The 9 criteria include withdrawal, desperation, self-restraint, relief, satisfaction, distraction, depression, regaining self-control and negligence of health. They tended to go through a weight gain loss cycle in a repetitive manner, and were faced with great physical and mental difficulties. In addition, they often went on a severely-strict diet without taking their health condition into consideration, which, in effect, causes various health problems. Conclusion: This study gives insights into the weight control experiences of obese female college students, and it shows developing more practical and effective nursing interventions are urgently needed.

• 한국자동차공학회논문집
• /
• 제11권2호
• /
• pp.148-156
• /
• 2003

Many car manufacturers have frequently adopted an aggressive inflator and a lower threshold speed for airbag deployment in order to meet an injury requirement for unbolted occupant at high speed crash test. Consequently, today's occupant safety restraint system has a weakness due to an airbag induced injury at low speed crash event. This paper proposes a new crash algorithm to improve the weakness by suppressing airbag deployment at low speed crash event in case of belted condition. The proposed algorithm consists of two major blocks-crash severity algorithm and deployment logic block. The first block decides crash severity with two levels by means of velocity and crash energy calculation from acceleration signal. The second block implemented by simple AND/OR logic combines the crash severity level and seat belt status information to generate firing commands for airbag and belt pretensioner. Furthermore, it can be extended to adopt additional sensor information from passenger presence detection sensor and safing sensor. A simulation using real crash data for a 1,800cc passenger vehicle has been conducted to verify the performance of proposed algorithm.

• 한국간호교육학회지
• /
• 제7권2호
• /
• pp.379-390
• /
• 2001

The purpose of this study was to examine the actual condition of the adolescent status delinquency and to predict that family environments, the mother's rear attitudes and personal factors influence on the adolescent status delinquency among high school students in Busan(N=404). Under these purposes of the study, the preliminary study was performed to divided the criminal delinquency from the status delinquency, and on the basis of the result of the preliminary study, the analysis of causal pathway were performed. The data were surveyed using paper and pencil self-rating. Descriptive statistics and pathway analyses were conducted to answer research objectives. The result of this study was as follows. First, the status delinquency and the criminal delinquency are different dimensions with each other independently. Second, Contents of the status delinquencies were Drinking, Smoking, Cheating examination, Stopping out, Reckless running, Gang fighting, Reading lewdness and Watching lewd video, Sexual intercourse with the other gender, etc., The criminal delinquencies were Robbing of bicycle or auto-bicycle, Taking nalcotic drug, Robbing money of drunkard and women, Rape, Setting on fire, etc. Third, The factors of structural environments of the family and the factors of mother's rear attitude influenced on the status delinquency via adolescence's compulsivity. that is to say, if the mother's rear attitude is affective, it restrains the impulsivity of adolescence causing to the restraint of the status delinquency.

• Journal of Welding and Joining
• /
• 제17권6호
• /
• pp.53-61
• /
• 1999

The use of thick plate in increasing in recent years due to the rapid expansion of chemical plants, nuclear plants, ships and other industrial plants. Welding is the most popular joining techniques employed in manufacturing industrial machineries and structures. Normally, Groove shapes are prepared according to appropriate rules and regulations such as KS, JIS, AWS, LR, DNV and etc. for various thicknesses of plate. However those groove angles tend to be too large. As a result of large groove angle, residual stress, deformation of material and strength reduction is obtained. Therefore, the reliability and safety of structures and machinery tend to be decreasing. Therefore, in this paper, theoretical as well as experimental study are carried out to find optimum groove shapes for T-welded joint of mild steel. The test specimen are made in same condition with simulation model. Welding residual stresses measurement by sectional cutting method. ⅰ) The mechanical difference for change the thickness of plate and groove angle are not appeared. ⅱ) In a mechanical point of view minimum preparation angle(40°) is more suitable than maximum groove angle(60℃). ⅲ) The measurement value and distribution of welding residual stresses are not effected largely by groove angle. It is mechanical restraint that mainly affect welding residual stresses distribution. In mechanical point of view minimum groove angle is more suitable than maximum groove angle. Therefore, it is appropriate to minimize the size of groove shape in strength and safety.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2006년도 추계 학술논문 발표대회 논문집
• /
• pp.151-154
• /
• 2006

It is generally referred that life cycle of concrete construction is depend on whether durability of concrete is obtained or not. Nevertheless, it has not been yet applied that new material and technology to improve durability of concrete such as seaside concrete construction. In this study, chemical agent which is capable of improving durability added to 2 types seaside concrete mixs and evaluated engineering properties such as slump, air content, setting time and compressive strength. Besides shrinkage crack with an restraint condition and chloride ion penetration tests were executed to measure resistance of concrete added chemical agent and then compared non-added. It was appeared that engineering properties and resistant for chlorides was possible to improved. But resistant for shrinkage crack was not noticeable improvement than non-added. Therefore it is necessary that more consideration and following study to improve durability aspect to shrinkage crack and chlorides resistant.

• Steel and Composite Structures
• /
• 제35권3호
• /
• pp.405-413
• /
• 2020

Current study on the buckling analysis of steel plate in composite structures normally focuses on applying finite element method to derive the buckling stress. However, it is time consuming, computationally complicated and tedious for general use in design by civil engineers. Therefore, in this study an analytical study is conducted to predict the buckling behavior of steel plates in composite structures. Hand calculation method was proposed based on energy principle. Novel buckling shapes with biquadratic functions along both loaded and unloaded direction were proposed to satisfy the boundary condition. Explicit solutions for predicting the critical local buckling stress of steel plate is obtained based on the Rayleigh-Ritz approach. The obtained results are compared with both experimental and numerical data. Good agreement has been achieved. Furthermore, the influences of key factors such as aspect ratio, width to thickness ratio, and elastic restraint stiffness on the local buckling performance are comprehensively discussed.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2008년도 정기총회 및 학술발표대회
• /
• pp.79-82
• /
• 2008

모멘트 하중을 받는 I형 보의 탄성좌굴강도는 하중의 종류, 하중의 단면 내 작용위치, 그리고 구속조건 등과 같은 인자들에 의해 영향을 받는다. 대부분의 시방기준에서는 균일한 모멘트 조건에 대한 좌굴강도를 사용하고 있으며 비균일한 모멘트 효과를 고려하기 위하여 모멘트 구배 수정계수를 적용하고 있다. 본 논문에서는 SSRC 지침서의 방법을 일축대칭 I형 보에 적용할 수 있도록 개선된 모멘트 구배 수정계수를 제안하였다. 단면 내 임의의 높이에 작용하는 연직방향 하중에 대한 일축대칭 I형 보의 유한요소 좌굴해석을 실시하였으며 연직방향 하중은 지간 중앙에 작용하는 집중하중과 등분포 하중을 고려하였다.

• Steel and Composite Structures
• /
• 제35권2호
• /
• pp.199-213
• /
• 2020

This paper proposes a Global-Local Analysis Method (GLAM) to assess the progressive collapse of steel framed structures under fire-induced column failure. GLAM obtains the overall structural response by combining dynamic analysis of the heated column (local) with static analysis of the overall structure (global). Test results of two steel frames which explicitly consider the dynamic effect during fire-induced column failure were employed to validate the proposed GLAM. Results show that GLAM gives reasonable predictions to the test frames in terms of both whether to collapse and the displacement verse temperature curves. Besides, several case studies of a two-dimensional (2D) steel frame and a three-dimensional (3D) steel frame with concrete slabs were conducted by using GLAM. Results show that GLAM gives the same collapse predictions to the studied cases with nonlinear dynamic analysis of the whole structure model. Compared with nonlinear dynamic analysis of the whole structure model, GLAM saves approximately 70% and 99% CPU time for the cases of 2D and 3D steel frame, respectively. Results also show that the load level of a structure has notable effects on the restraint condition of a heated column in the structure.

• 대한조선학회논문집
• /
• 제46권4호
• /
• pp.391-397
• /
• 2009

In this paper, longitudinal static stability is investigated, which is an essential requirement for the safety and the performance of the human powered hydrofoil boat (HPHB). In case a disturbance changes the trim angle of the boat, the derivative of the moment about the center of gravity must be negative in order to make the boat to be stable. The equation to evaluate the longitudinal static stability of the EPISODE, a HPHB of Chungnam National University with a height controlling system(HCS) is derived. From the derivative it is confirmed that a longitudinal and vertical position of the center of gravity is important for a HPHB. The range of a trim angle while the boat is foil-born was found with a HCS under the condition of mechanical restraint. And it is confirmed that the longitudinal static stability is satisfied for EPISODE in certain range of a trim angle. It is also shown that the longitudinal static stability and a range of the trim angle can be determined from the principal dimensions of a HPHB, therefore, it can be applied from the stage of the conceptual design of HPHB.