• 한국안광학회지
• /
• 제13권1호
• /
• pp.5-13
• /
• 2008

목적: 각막 부착 콘택트렌즈에는 어떠한 힘이 작용하며 또한 이 힘에 따른 렌즈의 운동을 알아보고자 본 해설을 작성하였다. 방법: 렌즈 아래 눈물층에는 모세관작용에 따른 힘이 발생하고 렌즈 회전에 따른 눈물층 간격변화에 기인하는 복원력이 발생한다. 눈깜빡임에 따라 콘택트렌즈는 눈꺼풀-렌즈 사이 마찰력과 눈꺼풀의 가속도에 의한 힘, 눈물층의 복원력 및 점성저항력에 의해 운동(움직임)이 결정된다. 눈깜빡임 도중/후 매순간 렌즈의 위치를 예측할 수 있는 미분방정식과 그 수치계산 프로그램 모델을 수립하였다. 이 컴퓨터 모델을 사용하여 눈깜빡임 주기, 렌즈의 BC, 눈꺼풀 압력 변화에 따른 매 순간 렌즈 위치를 예측할 수 있었다. 결과: 눈깜빡임 주기가 길수록, 눈꺼풀 압력이 클수록 눈꺼풀에 의한 마찰력 영향이 커져 렌즈 움직임이 커지며 BC가 증가할수록 눈물층 간격이 증가하여 점성저항력이 감소하며 따라서 렌즈 움직임이 커지는 것을 알 수 있었다. 눈깜빡임 후 렌즈는 눈물층 간격 변화에 따른 복원력과 눈물층의 점성저항력에 의해 진폭이 감소하는 진동을 하면서 평형위치로 복귀하게 된다. 이 경우 BC가 증가할수록 저항력이 감소하여 평형 위치로의 접근이 빨라진다. 결론: 콘택트렌즈의 움직임은 렌즈-각막 사이 눈물층의 물성 및 형상과 아울러 눈깜빡임에 의해 지배된다.

• 한국안전학회지
• /
• 제31권6호
• /
• pp.52-57
• /
• 2016

In this study, a restoring viscous damper is introduced for X-type damper system which is designed for the seismic response control of large spatial structures. A nonlinear numerical model for its behavior is developed using the result of dynamic loading tests. The X-type damper system is composed of restoring viscous dampers and connecting devices such as adjustable wire bracing, where the damping capacity of the system is controllable by changing the number of the dampers. The restoring viscous damper is devised to exert main damping force in tension direction, which is effective to prevent the buckling of bracing subjected to compressive axial force. To evaluate the performance of the proposed damper, dynamic cyclic loading tests are performed by using manufactured dampers at full scale. In order to construct the numerical model of the damper system, its model parameters are first identified using a nonlinear curve fitting method with the test data. The numerical simulations are then performed to validate the accuracy of the numerical model in comparison with the experimental test results. It is expected that the proposed system is effectively applicable to various building structures for seismic performance enhancement.

• 한국해양공학회지
• /
• 제1권1호
• /
• pp.57-64
• /
• 1987

Methods of nonlinear stochastic analysis of guyed towers are studied in this paper. Two different kinds of nonlinearities are considered. They are the nonlinear restoring force from the guying system and the nonlinear hydrodynamic force. Analyses are carried out mainly in the frequency domain using linearization techniques. Two methods for the linearization of the nonlinear stiffness are presented, in which the effects of the steady offset and the oscillating component of the structural motion can be adequately analyzed. those two methods are the equivalent linearization method and the average stiffness method. The linearization of the nonlinear drag force is also carried out considering the effect of steady current as well as oscillatory wave motions. Example analyses are performed for guyed tower in 300m water. Transfer functions and the expected maximum values of the deck displacement and the bending moment near the middle of the tower are calculated. Numerical results show that both of the frequency domain methods presented in this paper predict the responses of the sturcture very reasonably compared with those by the time integration method utilzing the random simulations wave particla motions.

• 한국안광학회지
• /
• 제10권3호
• /
• pp.173-184
• /
• 2005

각막과 콘택트렌즈 사이의 눈물 층에는 모세관 작용에 따른 장력이 발생하고, 순목 결과 렌즈가 평형위치에서 벗어나게 되면 렌즈의 상/하 또는 좌/우의 눈물 층의 간격이 변하며 이 간격 변화에 의해 복원력이 발생한다. 이 복원력과 눈물 층의 정성 저항력에 의해 렌즈는 진폭이 감소하는 진동을 하면서 평형위치로 복귀하게 된다. 순목 시 안검작용에 의해 렌즈가 일정한 위치로 편위 되었다고 설정할 때 순목 종료 후 매 순간 렌즈의 위치를 예측할 수 있는 미분방정식과 그 수치계산 프로그램 모델을 수립하였다. 이 컴퓨터 모델을 사용하여 렌즈의 BC, 직경, 초기 위치, 무게 등이 감쇄진동에 미치는 영향을 모사하였다. 순목 후 렌즈의 평형 위치로의 귀환은 순목 시간이 적절한 경우에는 순목 종료 직후의 렌즈 위치 및 직경에 그다지 영향을 받지 않고 빠르게 이루어지지만 렌즈의 BC가 지나치게 크거나, 무게가 큰 경우에는 렌즈 진동이 급격히 느려지기 때문에 평형 위치로 되돌아오는데 시간이 많이 걸리게 될 것이다.

• Steel and Composite Structures
• /
• 제13권6호
• /
• pp.501-519
• /
• 2012

As an alternative to current conventional force-based assessment methods, the energy-based seismic performance of a code-designed 20-storey high-rise steel building is evaluated in this paper. Using 3D nonlinear dynamic time-history method with consideration of additional material damping effect, the influences of different restoring force models and P-${\Delta}/{\delta}$ effects on energy components are investigated. By combining equivalent viscous damping and hysteretic damping ratios of the structure subjected to strong ground motions, a new damping model, which is amplitude-dependent, is discussed in detail. According to the analytical results, all energy components are affected to various extents by P-${\Delta}/{\delta}$ effects and a difference of less than 10% is observed; the energy values of the structure without consideration of P-${\Delta}/{\delta}$ effects are larger, while the restoring force models have a minor effect on seismic input energy with a difference of less than 5%, but they have a certain effect on both viscous damping energy and hysteretic energy with a difference of about 5~15%. The paper shows that the use of the hysteretic energy at its ultimate state as a seismic design parameter has more advantages than seismic input energy since it presents a more stable value. The total damping ratio of a structure consists of viscous damping ratio and hysteretic damping ratio and it is found that the equivalent viscous damping ratio is a constant for the structure, while the equivalent hysteretic damping ratio approximately increases linearly with structural response in elasto-plastic stage.

• 대한치과기공학회지
• /
• 제36권3호
• /
• pp.165-169
• /
• 2014

Purpose: This study is a mechanical strength supplementation of denture base resin Polymethyl methacrylate (PMMA) is in general use for denture base resin of the partial and full denture, however, The polymerization process of PMMA is not stabilized. Because of compatibility problems, preceding studies were performed, which were enhancing mechanical strength(Camilo Machado 2007),(Ana M. 2008), addition filler to materials property(Ayse Mese, 2008), self curing method(Hiroshi Shimizu, 2008). Methods: The carbon fiber and polyacetal filler, reinforced the mechanical strength for improving the stability of denture base resin were supplemented to the self cured resin. The Modulus of elasticity and the restoring force were calculated by tensile test. Results: The strengths of the heat and self cured resin were respectively decreased and increased, when the filler was supplemented to the denture base resin and the modulus of elasticity of both heat and self cured resin were not increased, when the filler was supplemented to the denture base resin. Conclusion: The restoring forces of self cured resin containing 10% filler were increased, when the filler was supplemented to the denture base resin.

• 대한기계학회논문집B
• /
• 제35권12호
• /
• pp.1301-1307
• /
• 2011

슬관절 소작용 완드(Electrosurgical Knee Wand, EKW)는 고주파 소작법으로 슬관절 인대, 조직 등의 응고, 삭마, 절제, 등에 적용된다. EKW와 radiofrequency를 이용한 조직응고, 삭마 등의 슬관절 수술에서 수술안전성, 편의성 및 성공률을 극대화하기 위해서는 병변에 매우 정확하고 안전하게 EKW가 선택적 접근을 할 수 있도록 유도하는 탁월한 방향조종제어능이 핵심기술이다. 따라서 본 연구에서는 대퇴경골부 제한적인 공간에서 가장 적합한 수술용 의료기기 액추에이터로 판단되는 형상기억합금(SMA) 와이어를 이용하여 형상기억효과를 극대화 할 수 있는 SMA 인장스프링 모델을 제작하여 실험을 수행하였다. 또한 SMA의 열전기적 특성 및 전류변화에 따른 온도특성에 대한 연구를 수행하고 SMA 인장스프링의 설계조건에 따른 회복력 및 행정거리의 관계를 평가하였다. 그 결과, SMA 인장스프링의 직경이 작아질수록 최대온도는 증가하였다. 전류인가 15초의 경우는 전류량 증가와 힘의 증가가 비례한 반면, 전류인가 30초는 매우 불안정한 결과가 나타났다. 반면, 전류량 증가와 행정거리(TS) 증가 관계는 전류인가 15초일 때가 전류인가 30초일 때보다 더 안정적인 결과가 나타났다.

• Elastomers and Composites
• /
• 제52권4호
• /
• pp.280-286
• /
• 2017

The mechanical and dynamic properties according to the content of filler, plasticizer, and crosslinking agent of rubber composites for Lipseal were measured in this study. The mechanical properties of the composite including the silane coupling agent and silica were found to be superior to those of the composite containing carbon black. It was found that the rebound resilience characteristics were influenced by the crosslink density of sulfur rather than the filler or plasticizer. In the case of recovery, it was confirmed that the elastic restoring force improved in the compression deformation condition and recovery increased as the crosslinking density increased. The rubber composite for Lipseal of this study is expected to improve the manufacturing technology of the rubber composite which can implement the optimum function for recognizing the performance such as oil resistance, durability and compression set.

• Journal of Welding and Joining
• /
• 제21권4호
• /
• pp.87-91
• /
• 2003

Effects of the circular and non-circular pad shapes on self-alignment in BGA soldering are predicted using Surface Evolver, and the calculated results are compared with experimental data. While the pad shape has minor effects on self-alignment in the vertical direction, self-alignment in the lateral direction depends on the pad direction and length ratio of the non-circular pad. Larger restoring force is obtained in the minor-axis direction than the major-axis direction, which suggests a possibility of reducing misalignment in the specific direction. The restoring force of the circular pad is between those of the non-circular pad in the major and minor-axis directions. The calculated results of Surface Evolver show reasonably good agreements with experimental data using the shear loading system.

• Steel and Composite Structures
• /
• 제27권4호
• /
• pp.417-426
• /
• 2018

This paper presents the seismic behaviors and restoring force model of ring beam joints of steel tube-reinforced concrete column structure under cyclic loading. First, the main failure mode, ultimate bearing capacity, stiffness degradation and energy dissipation capacity are studied. Then, the effects of concrete grade, steel grade, reinforcement ratio and radius-to-width ratios are discussed. Finally, the restoring force model is proposed. Results show that the ring beam joints of steel tube-reinforced concrete column structure performs good seismic performances. With concrete grade increasing, the ultimate bearing capacity and energy dissipation capacity increase, while the stiffness degradation rates increases slightly. When the radius-width ratio is 2, with reinforcement ratio increasing, the ultimate bearing capacity decreases. However, when the radius-to-width ratios are 3, with reinforcement ratio increasing, the ultimate bearing capacity increases. With radius-to-width ratios increasing, the ultimate bearing capacity decreases slightly and the stiffness degradation rate increases, but the energy dissipation capacity increases slightly.