• 지능정보연구
• /
• 제19권3호
• /
• pp.113-125
• /
• 2013

기업 경영에 있어서 고객의 소리(VOC)는 고객 만족도 향상 및 기업의사결정에 매우 중요한 정보이다. 이는 비단 기업뿐만 아니라 대고객, 대민원 업무를 처리하는 모든 조직에 있어서도 동일하다. 때문에 최근에는 기업뿐만 아니라 공공, 의료, 금융, 교육기관 등 거의 모든 조직이 VOC를 수집하여 활용하고 있다. 이러한 VOC는 방문, 전화, 우편, 인터넷게시판, SNS 등 다양한 채널을 통해 전달되지만, 막상 이를 제대로 활용하기는 쉽지 않다. 왜냐하면, 고객이 매우 감정적인 상태에서 고객의 주관적 의사를 음성 또는 문자로 표출하기 때문에 그 형식이나 내용이 정형화되어 있지 않고 저장하기도 어려우며 또한 저장하더라도 매우 방대한 분량의 비정형 데이터로 남기 때문이다. 본 연구는 이러한 비정형 VOC 데이터를 자동으로 분류하고 VOC의 유형과 극성을 판별할 수 있는 오피니언 마이닝 기반의 지능형 VOC 분석 시스템을 제안하였다. 또한 VOC 오피니언 분석의 기준이 되는 주제지향 감성사전 개발 프로세스와 각 단계를 구체적으로 제시하였다. 그리고 본 연구에서 제시한 시스템의 효용성을 검증하기 위하여 의료기관 홈페이지에서 수집한 4,300여건의 VOC 데이터를 이용하여 병원에 특화된 감성어휘와 감성극성값을 도출하여 감성사전을 구축하고 이를 통해 구현된 VOC분류 모형의 정확도를 비교하는 실험을 수행하였다. 그 결과 "칭찬, 친절함, 감사, 무사히, 잘해, 감동, 미소" 등의 어휘는 매우 높은 긍정 오피니언 값을 가지며, "퉁명, 뭡니까, 말하더군요, 무시하는" 등의 어휘들은 강한 부정의 극성값을 가지고 있음을 확인하였다. 또한 VOC의 오피니언 분류 임계값이 -0.50일 때 가장 높은 분류 예측정확도 77.8%를 검증함으로써 오피니언 마이닝 기반의 지능형 VOC 분석시스템의 유효성을 확인하였다. 그러므로 지능형 VOC 분석시스템을 통해 VOC의 실시간 자동 분류 및 대응 우선순위를 도출하여 고객 민원에 대해 신속히 대응한다면, VOC 전담 인력을 효율적으로 운용하면서도 고객 불만을 초기에 해소할 수 있는 긍정적 효과를 기대해 볼 수 있을 것이다. 또한 VOC 텍스트를 분석하고 활용할 수 있는 오피니언 마이닝 모형이라는 새로운 시도를 통해 향후 다양한 분석과 실용 프레임워크의 기틀을 제공할 수 있을 것으로 기대된다.

• 한국조경학회지
• /
• 제51권3호
• /
• pp.70-82
• /
• 2023

최근 IT 기술과 데이터의 범람으로 생활 전반적인 부분의 패러다임이 전환되고 있다. 이러한 기술의 발전과 변화는 학술영역에도 영향을 미치고 있다. 학문적 교류와 연계를 통해 연구주제나 연구 방법의 개선이 이루어지고 있다. 특히, 데이터 기반의 연구 방법이 다양한 학문분야에서 진행되고 있으며 조경학에서도 지속적인 연구가 필요한 시점이다. 따라서 본 연구에서는 이러한 시대적 상황을 반영하여 인공지능의 한 분야인 머신러닝을 활용한 경관 선호 평가 및 예측모델의 개발 가능성을 알아보는 것을 목표로 한다. 본 연구의 목표를 달성하기 위하여 경관 분야에 머신러닝 기법을 적용하여 경관 선호 평가 및 예측 모델을 구축하고, 구축된 모형의 모의정도를 검증하였다. 이를 위해 본 연구에서는 최근 신재생에너지 사업으로 주목받는 풍력발전시설 경관 이미지를 연구대상으로 선정하였다. 분석을 위하여 풍력발전시설 경관 이미지를 웹크롤링 기법을 활용하여 수집하고 분석 테이터셋을 구축하였다. 우수한 성능의 예측모델 도출을 위하여 머신러닝 분석에 활용되는 University of Ljubljana의 프로그램인 오렌지 버전 3.33을 활용하였다. 또, 머신러닝 학습데이터의 평가기준을 통합한 모델과 평가기준 별도 모델 구조를 활용하였으며, 머신러닝 분류모델에 적합한 kNN. SVM, Random Forest, Logistic Regression, Neural Network 알고리즘을 사용해 모델을 생성하였다. 생성된 모델을 성능 평가를 실시하여 본 연구에 가장 적합한 예측모델을 도출하였다. 본 연구에서 도출된 예측모델은 경관의 유형에 따른 분류, 경관과 대상의 시거리에 따른 분류, 선호에 따른 분류 등 3가지 평가기준을 별도로 평가 후 종합해 예측하여 결과를 도출하였다. 연구 결과 경관 유형에 따른 평가 기준 정확도 0.986, 시거리에 따른 평가 기준 정확도 0.973, 선호에 따른 평가 기준 정확도 0.952에 달하는 높은 정확도를 가진 예측모델을 개발하였으며, 평가데이터 예측 결과를 통한 검증과정을 보아도 모델의 성능 치를 상회하는 성과를 도출했음을 알 수 있다. 경관 관련 연구에서 머신러닝을 활용한 예측모델 개발 가능성을 알아본 실험적 시도로 이미지 데이터의 수집 및 정제를 통해 데이터 세트를 구축하여 높은 성능의 예측모델이 생성 가능하며, 이후 경관 관련 연구 분야에 활용될 수 있다는 가능성을 확인할 수 있었다. 본 연구의 결과와 시사점, 한계점을 반영한다면 풍력발전시설의 경관뿐만 아니라 자연경관이나 문화경관 등 다양한 형태의 경관 예측모델 개발이 가능할 것으로 생각되며, 경관 유형에 따라 이미지를 분류하는 모델의 연구를 통해 데이터 분류의 시간을 단축하거나 머신러닝을 활용한 경관예측 인자분석을 통해 경관계획 요소의 중요도 분석 등의 주제에 맞는 연구 방법을 탐색하고 적용하여 후속 연구를 진행한다면 조경학 분야에서도 머신러닝 기법을 보다 유용하고 가치 있게 활용할 수 있을 것으로 생각된다.

• 핵의학기술
• /
• 제23권1호
• /
• pp.35-39
• /
• 2019

[목적] B형 간염바이러스(hepatitis B virus, HBV)감염은 전세계적으로 중요한 공중 보건 문제이며 만성간염, 간 경변, 간암의 주요 원인으로 알려져 있으며, 이러한 질환의 진단 및 치료에 B형 간염바이러스의 혈청학적 검사는 필수적이다. 항 바이러스 치료중인 B형 간염 환자를 대상으로 면역방사계수 측정법(IRMA; Immunoradiometric assay)과 화학발광 미세입자 면역분석법(CMIA; Chemiluminescent Micropartical Immunoassay)을 이용하여 HBe-Ag 검사를 시행하였고, 실시간 중합효소 연쇄반응(RT-PCR; Realtime-Polymerase Chain Reaction)법을 이용하여 혈청 내 HBV DNA 검출율 을 비교 분석 하였다. [대상 및 방법] 항 바이러스 치료가 시행중인 B형 간염 환자 270명을 대상으로 HBeAg 혈청 검사와 HBV DNA 정량 검사를 실시하였다. HBeAg 혈청 검사는 검출 원리가 다른 두 가지 혈청학적 검사법(IRMA, CMIA)을 적용 하였고, 혈청 내 HBV DNA는 Abbott m2000 System을 사용하여 실시간 중합효소 연쇄반응(RT-PCR; Realtime-Polymerase Chain Reaction)법으로 정량 측정 하였다. [결과] HBeAg 검출율은 면역방사계수법(IRMA)의 경우 24.1% (65/205), 화학발광 미세입자 면역 분석법(CMIA)에서는 82.2% (222/48)의 결과를 보였다. 혈청학적 검사방법(IRMA, CMIA)에 따른 HBeAg 검사결과의 일치율은 33% (89/270)이다. 실시간 중합효소 연쇄반응(RT-PCR)을 이용한 혈청 내 HBV DNA의 검출율은 29.3% (79/191)를 보였고, 혈청 내 HBV-DNA 농도는 $16IU/mL{\times}1.0{\times}10^9IU/mL$ 이며 검출한계는 <15IU/mL 이다. 면역방사계수법(IRMA)으로 HBeAg 검출결과가 양성일때 55.4%, 그리고 음성일때 20.9%의 HBV DNA 검출율과 $1.1{\times}10^8IU/mL$, $5.7{\times}10^5IU/mL$의 혈청내 HBV DNA농도를 나타냈다. 이에 반해 화학발광 미세입자 면역 분석법(CMIA)의 경우 HBeAg 검출결과가 양성일때 HBV DNA 검출율은 28.4%, 음성일때 33.3%의 결과를 나타냈으며 혈청 내 HBV DNA농도는 $6.0{\times}10^7IU/mL$, $2.4{\times}10^5IU/mL$ 이었다. 면역방사계수법과 화학발광 미세입자 면역 분석법에서 동일하게 HBeAg 검출 결과가 양성인 경우 HBV DNA 검출율은 62.3%의 결과를 보였으며, 혈청 내 HBV DNA 농도는 $1.1{\times}10^8IU/mL$ 이다. [결론] 혈청학적 검사법에 따른 HeAg 검출율은 많은 차이를 보였다. 이러한 차이는 검사kit에 사용된 Ab의 특성과 epitope, HBV의 genotype등 여러 가지 원인으로 생각된다. 혈청학적 검사 결과로 분류 된 그룹별 HBV DNA의 검출율과 농도를 비교한 결과, Group II(IRMA 양성, CMIA 양성, N=53)에서 높은 검출율과 농도를 확인할 수 있었다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.

• Radiation Oncology Journal
• /
• 제19권2호
• /
• pp.100-106
• /
• 2001

목적 : 국소 진행된 비인강암으로 유도 화학요법 혹은 동시 화학요법 및 방사선 치료를 받은 환자들의 부작용 및 단기 생존율을 비교하기 위하여 본 연구를 시행하였다. 대상 및 방법 : 1989년 10월부터 1998년 5월까지, 비인강암으로 진단받고 유도 화학요법 혹은 동시 화학요법 및 방사선 치료를 받은 62명의 환자들을 대상으로 후향적 분석을 시행하였다. 유도 화학요법군은 50명, 동시 화학요법군은 12명이었다. 나이, 성, 전신 수행능력, 조직학적 유형 등은 양군에서 비교적 고르게 분포하였다. 병기 분포는, 유도 화학요법군의 경우 IIB가 $32\%$, III가 $30\%$, 그리고 IV가 $38\%$였으며, 동시 화학요법군은 각각 50, 33.3, $16.7\%$였다. 양군에서 화학요법 약제는 CF (cisplatin and 5-FU)였고, 약제 투여 방법은 동일하였다. Cisplatin $100\;mg/m^2$을 day 1에, 5-FU $1,000\;mg/m^2$을 day $2\~6$에 각각 정맥투여하였으며 3주 간격으로 반복하였다. 방사선 치료 종료시까지 시행된 화학요법의 횟수는 양군 모두 테$1\~3$회(중앙값 2회)였다. 방사선 치료는 양군 모두 일일선량 $1.8\~2.0\;Gy$를 주 5회 조사하였다. 총 방사선량은, 유도 화학요법군의 경우 $69.4\~86\;Gy$ (중앙 선량 73.4 Gy), 동시 화학요법군은 $69.4\~75.4\;Gy$ (중앙 선량 70.8 Gy)였다. 추적기간은, 유도 화학요법군의 경우 $9\~l16$개월(중앙값 40.5개월), 동시 화학요법군은 $14\~29$개월(중앙값 21개월)이었다. 결과 : 전체 환자에서 2년 생존율은 $78.7\%$였다. 치료 방법별 2년 전체 생존율은, 유도 화학요법군이 $77\%$, 동시 화학요법군은 $87\%$였으며(p>0.05), 2년 무병 생존율은 각각 $56\%$ 와 $81\%$였다(p>0.05). 최종 치료에 대한 완전 관해율은 $75.5\%$와 $91.7\%$로 동시 화학요법군에서 높았으나 통계학적 유의성은 없었다. 방사선 치료시 grade $3\~4$의 혈액학적 독성은 양군에서 차이가 없었고, grade 2의 백혈구 감소가 동시 화학요법군에서 많았다 $(18\%\;vs\;66.7\%)$. Grade $3\~4$의 점막염은 동시 화학요법군에서 많았다$(4.0\%\;vs\;33.3\%)$. 전체적으로 grade $3\~4$의 급성 부작용이 동시 화학요법군에서 빈번하였고$(6.0\%\;vs\;41.7\%,\;p=0.005)$, 부작용으로 사망한 경우는 없었다. 결론 : 국소 진행된 비인강암에서 동시 화학요법을 시행함으로써 치료의 반응율과 2년 무병 생존율이 향상되는 경향을 보였으나, 통계학적 의의는 없었다. 따라서, 좀더 많은 대조군과 장기 추적관찰이 요구된다.

• Journal of Nutrition and Health
• /
• 제41권1호
• /
• pp.65-76
• /
• 2008

본 연구는 저소득층 노인을 대상으로 하여 식생활 실태 및 건강상태를 조사하여 노인의 건강과 영양상태의 상호연관성 및 이에 영향을 미치는 위험 요인을 파악하고자 실시되었다. 조사는 광주광역시에 거주하는 저소득층 여자노인 92명을 대상으로 하였으며, 조사대상자를 연령에 따라 세 그룹 ($65{\sim}74$세, $75{\sim}84$세, 85세 이상)으로 체위, 혈액, 영양상태 등을 비교하였으며, Nutritional Screening Initiative (NSI) 점수에 따라 $NSI{\leq}3$은 영양 양호군, NSI > 3은 영양 위험군으로 구분하여 영양위험정도에 따른 식생활 관련 건강요인을 비교하였으며 연구결과를 요약하면 다음과 같다. 1) 본 조사대상자의 평균 연령은 79.0세이었으며, 사회경제적 수준이 매우 낮았으며, 치아건강상태 (70.7%) 및 경제적인 이유 (76.1%)로 음식섭취가 부실하였으며 혼자거동하기 힘든 여자 노인의 비율이 48.9%인데, 63.0%의 노인이 혼자 식사한다고 응답하여 저소득층 여자 노인의 사회경제적 위험 요인이 영양상태를 더욱 악화시키는 것으로 조사되었다. 2) 본 조사 대상자가 앓고 있는 주요 질병으로는 고혈압(42.9%), 관절염 및 신경통(33.0%), 당뇨병 (15.4%), 심혈관계 질환 (8.8%), 소화기계 질환 (8.8%) 등의 순이었다. 전체 여자 노인의 44.6%가 비만하였으며, 고혈압, 당뇨병, 심혈관계 질환 중 1개 이상의 질병을 보유한 노인이 53.3%, 대사 증후군을 보유한 노인이 49.3%로서 여자 노인의 건강상태가 전반적으로 불량한 것 판단되었다. 3) 조사대상자의 평균 체중은 54.5, 신장은 147.1cm로서 한국인 영양권장량설정을 위한 체위 기준치와 비교할 때 체중은 더 많은 반면 신장은 낮은 것으로 조사되었으며, 연령증가에 따라 체중과 체단백질이 감소한 반면 체지방은 감소되지 않았고, 체지방 비율이 40.0%, 허리둘레가 87.7cm에 달하였으며, BMI가 25.1 $kg/m^2$으로 전체적으로 비만한 경향을 나타내었다. 4) 연령에 따라 혈압에 유의적인 차이가 없었으며, 혈청알부민을 제외하고는 혈액의 지질성분, 면역성분, 항산화 성분에서 연령별로 유의적인 차이가 없었다. 여자 노인의 평균 수축기 혈압 143.0 mmHg, 공복 혈당은 119.7mg/dl로서 노인의 중요한 건강 문제는 고혈압, 당뇨 등임을 확인할 수 있으며, TNF-${\alpha}$수준이 높아 노년기 염증 반응 증가를 시사하였다. 5) 조사대상자의 영양상태는 매우 불량하였으며, 연령증가에 따라 영양섭취 실태가 더 불량해지는 경향을 나타내고 있으나 연령에 따른 유의적인 차이는 없었다. NSI 점수를 기준으로 하여, 영양 위험군 (NSI>3)에 비해 영양 양호군 $(NSI{\leq}3)$으로 구분된 노인의 하루 3회 이상의 식사 비율이 높았으며, 건강 인지도가 더 좋고, 우울증이 적었으며 운동 실시율이 높고, 당뇨 유병률이 낮았다. 6) 영양섭취 실태와 면역, 염증반응, 항산화 능과의 상관관계를 살펴 본 결과, 혈청의 IL-6와 $TNF-{\alpha}$가 영양상태와 유의적인 상관관계를 나타내어 항 염증성 인자보다는 염증유발인자가 노인의 영양상태와 관련이 있었으며, IL-2, TAS, 공복 혈당 등이 체위와 유의적인 관계가 있어 노인의 영양상태나 체위가 염증반응을 일으켜 노인의 건강에 영향을 미칠 수 있는 것으로 생각된다. 결론적으로, 연령이 증가함에 따라 생리적, 심리적, 사회경제적 요인이 노인의 영양상태에 복합적으로 작용하여, 영양불균형을 초래하고, 만성질환이 있는 경우에는 영양상태가 더욱 불량해지는 등의 건강상의 악순환을 초래하고 있다. 노년기에 건강한 삶을 유지하기 위해서는 적절한 영양소 섭취, 운동, 정상체중 유지가 중요하며 영양문제를 초래할 수 있는 위험요인을 줄여야 될 것이다. 특히, 노인이 양질의 식사를 할 수 있는 방안이 필요하며, 노인의 영양개선 및 건강 증진을 위해서 우리나라 노인의 식습관 및 영양상태, 체위, 질병 등에 관한 종합적이고 체계적인 연구방법에 대한 타당성 연구가 선행되어야 할 것이며 타당성 있는 연구결과를 바탕으로 하여 노인의 영양균형 및 건강증진을 위한 적절한 연구와 지원대책이 필요한 것으로 사료된다.

• Asia Marketing Journal
• /
• 제12권2호
• /
• pp.111-133
• /
• 2010

투자상품의 확산, 고령화 등으로 인한 금융니즈 다양화와 자본시장법 시행으로 인한 금융회사간 치열한 경쟁으로 인해 금융산업 내에서 마케팅의 역할이 더욱 중요해지고 있다. 그러나, 지금까지 다른 산업에 비해 금융산업의 마케팅 연구는 상대적으로 부족하였다. 본 연구는 향후 구체적인 금융마케팅 연구들이 진행되기에 앞서 국내 금융마케팅 연구들을 정리하고, 국내 금융회사 마케팅 담당자를 In-depth 인터뷰하여 실제 국내 금융 마케팅 현황을 조사하였다. 이를 통해 향후 금융마케팅 연구에 필요한 시사점을 얻고자 하였다. 분석 결과, 다른 산업의 마케팅과 다른 금융 마케팅만의 고유 특징에 대한 이론적인 연구가 부족하였고, 금융산업 내에서 은행, 증권, 보험, 카드 산업 간의 마케팅 특징 차이에 대한 연구도 부족하였음을 알 수 있었다. 소비자행동 관점에서 금융고객의 의사결정 과정에 관한 연구도 부족하였다. 또한, 우리나라의 금융회사의 마케팅 현황은 외형적으로 어느 정도 성숙 단계에 접어들었다고 볼 수 있으나, 실제 업무는 여전히 과거의 영업지원, 혹은 프로모션 및 CRM 데이터 분석 등 단기적인 부분에 치중되어 있었다. 그리고, 은행, 증권, 보험, 카드 회사 등 각 세부 금융산업별 마케팅 담당자들이 중요하게 생각하는 금융마케팅의 키워드와 문제 인식 정도도 서로 다름을 알 수 있었다. 본 연구는 이러한 분석 결과를 바탕으로 향후 금융마케팅 연구를 위한 시사점과 함께 6가지의 연구명제를 제안하였다.

• Radiation Oncology Journal
• /
• 제13권4호
• /
• pp.359-368
• /
• 1995

목적 : 자궁경부암환자에서 근치적 목적으로 방사선치료를 외부조사와 강내조사를 시행한 환자의 실패양상과 생존율을 관찰하고 예후인자를 분석하기 위하여 본 연구를 시도하였다. 방법 : 1982년 3월 부터 1990년 5월 까지 8년간 자궁경부암으로 진단받고 이대부속병원 치료방사선과에서 방사선치료를 시행한 환자 280예 중 근치목적의 방사선치료로서 외부조사와 강내조사를 완료한 환자 114예를 대상으로 후향적 분석을 하였다. 연령분포는 30세에서 77세 까지로 중앙값은 53세이었다. FIGO에 의한 병기분포는 IB 19예($16.7{\%}$), IIA 23예($20.2{\%}$), IIB 42예($36.8{\%}$), IIIA 12예($10.5{\%}$), IIIB 18예($15.8{\%}$)이었다. 병리조직학적소견은 112예가 편평상피암이었고 2예는 선암이었다. 방사선치료방법으로 외부조사는 6MV 선형가속기(6MV,NEC 1000X)를 사용하여 전 골반강에 40-54 Gy를 조사하였으며, 강내조사는 Cs-137 밀봉선원으로 Fletcher-Suit applicator를 사용하여 1회 내지 2회 시행하여 point A에 40-42 Gy를 조사하여 point A의 총 방사선 선량은 병기 IB-IIA는 80-90 Gy(중앙값: 8580 cGy)로, IIB이상은 85-100 Gy(중앙값: 8850 cGy)로 하였다. 추적기간은 1개월에서 85개월로서 중앙값은 30개월이었다. 결과 : 국소실패만 보인 경우는 20예로 전체환자의 $17.5{\%}$이었으며 원격전이와 동반한 국소실패를 보인 경우는 7예($6.1{\%}$)로 전체 국소실패율은 $23.7{\%}$(27/114)이었다. 병기에 따른 국소실패율은 IB에서 $10.5{\%}$, IIA에서 $8.7{\%}$, IIB에서 $23.8{\%}$, IIIA에서 $50.5{\%}$, IIIB에서 $38.9{\%}$이었다. 국소실패부위는 자궁경부가 가장 많아서 전체 국소실패의 $37.5{\%}$(12/32)를 차지하였으며 다음은 자궁막조직으로 $34.3{\%}$(11/32)이었다. 원격전이만 있는 보인 경우는 6예로 전체환자의 $5.3{\%}$를 차지하였다. 원격전이된 부위는 골에 가장 많았으며(4/14), 다음으로 쇄골상관절종(3/14), 간(2/14)의 순으로 나타났다. 재발시기는 치료완료후 3개월에서 50개월이며 중앙값은 15개월이었다. 합병증으로 직장손상이 5예, 방광손상이 9예로서 총 14예($12.3{\%}$)이었다. 전체환자의 5년 생존율은 $70.5{\%}$이었고 병기 IB는 $100{\%}$, IIA는 $76.9{\%}$, IIB는 $77.6{\%}$, IIIA는 $87.5{\%}$, IIIB는 $69.1{\%}$이었다. 5년 무병생존율은 전체환자에서 $53.6{\%}$이었으며, 병기 IB는 $81.3{\%}$, IIA는 $67.9{\%}$, IIB는 $46.8{\%}$, IIIA는 $45.4{\%}$, IIIB는 $34.4{\%}$를 보였다. 무병생존율에 관계되는 예후인자는 다변수 분석에 의하면 performance status(P=0.0063)와 치료반응율(P=0.0026)은 유의성이 있었으나 병기,나이 및 point A의 방사선 선량은 유의성이 없었다. 결론: 자궁경부암환자에서 방사선치료 단독요법에 의한 치료성적은 병기 IB와 IIA는 양호하였으나 IIB이상에서 Point A의 방사선 선량을 90 Gy이상 증가시켜도 국소실패율이 높고 생존율의 향상을 얻을 수 없기 때문에 항암제 혹은 방사선감작제와 병용함으로써 국소제어율을 높이고 원격전이를 감소시키는 방법이 앞으로 연구되어져야 할 과제라고 생각된다.

• 한국학교ㆍ지역보건교육학회지
• /
• 제9권1호
• /
• pp.85-97
• /
• 2008

학교구강보건은 학생의 구강건강을 합리적으로 관리하고, 구강건강에 대한 지식과 태도 및 행동을 변화시켜, 일생동안 구강건강을 적절히 관리할 수 있는 능력을 배양시키는 과정이다. 이러한 학교구강보건의 목적은 학생의 구강질환을 예방하고 초기에 치료함으로써, 구강건강을 증진 유지시켜 건전한 심신을 양성하여 교육 본래의 목표를 달성함에 있다. 이에 본 연구는 중학생의 구강건강에 대한 인식 및 행동을 파악하여 대상에 알맞은 학습 목표와 교육방법을 모색하고 효과적인 구강건강관리 방안을 위한 기초자료로 활용하고자 실시하였다. 농촌 지역인 충청북도 OO군에 소재한 중학교 학생들을 대상으로 자기기입방식의 설문조사를 실시한 결과 다음과 같은 결론을 얻었다. 1. 중학생의 구강건강 지식에 대한 항목 중 치과질환의 증상에 대한 인지율에 비해 부정 교합의 원인(51.5%)과 잇몸병 예방법(15.1%) 등 치과질환의 원인과 예방법에 대한 인지율이 낮은 것으로 조사되었다. 2. 잇솔질 시기에 대한 지식과 행동을 비교하여 살펴본 결과 인식 및 행동 모두 50% 수준 또는 그 이하였으며, 특히 점심식사 후에는 46.2%가 인식, 실천은 33.0%에 불과하였다. 3. 하루 잇솔질 횟수는 하루에 두 번 하는 경우(47.5%)가 가장 많았으나, 한 번 또는 한 번도 닦지 않는다는 응답(5.8%)도 있어 소수의 학생들이지만 잇솔질 실천이 매우 저조한 것으로 조사되었다. 4. 중학생들의 간식섭취 횟수는 일일 2회 이하가 68.8%였으나, 5회 이상 섭취하는 학생도 9.8%로 조사되었으며, 남학생은 5회 이상이 15.8%로 조사되어 성별의 차이가 있었다(p<0.01). 5. 전신건강 중 치아가 차지하는 비중에 대해 30-40% 중요하다는 응답이 31.3%로 가장 많았으며, 다음으로 50-60% 중요하다 30.6%, 60%이상 중요하다 29.9%고 응답하여 학생들은 전신건강 중 구강건강이 매우 중요하다고 인지하고 있는 것으로 조사되었다. 반면, 치과내원은 이가 아플 때에만 간다 49.3%로 가장 많았으며, 이가 아팠지만 치과에는 가지 않았다 21.7%로 응답하여 치아의 중요성에 대한 인지도에 비해 치과에 내원하는 비율은 매우 낮은 것으로 분석되었다. 6. 현재 우리나라 학교구강보건사업은 초등학생을 대상으로 한 세부적인 프로그램과 국가의 지원은 있으나 청소년을 위한 구체적인 프로그램 및 지원은 미비한 상태이다. 건강에 대해 자기 스스로 관리할 수 있는 시기인 청소년 시기의 학교구강보건사업은 효과적이라고 판단되며, 이 시기에 구강보건교육을 비롯한 구체적인 구강건강증진 프로그램이 개발되어 학교구강보건사업이 중 고등학교에도 확대 실시되어야 할 것으로 검토되었다.