• Molecules and Cells
• /
• v.19 no.3
• /
• pp.375-381
• /
• 2005

Phospholipase C-${\beta}$ (PLC-${\beta}$) hydrolyses phosphatidylinositol 4,5-bisphosphate and generates inositol 1,4,5-trisphosphate in response to activation of various G protein-coupled receptors (GPCRs). Using glial cells from knock-out mice lacking either PLC-${\beta}1$ [PLC-${\beta}1$ (-/-)] or PLC-${\beta}3$ [PLC-${\beta}3$ (-/-)], we examined which isotype of PLC-${\beta}$ participated in the cellular signaling events triggered by thrombin. Generation of inositol phosphates (IPs) was enhanced by thrombin in PLC-${\beta}1$ (-/-) cells, but was negligible in PLC-${\beta}3$ (-/-) cells. Expression of PLC-${\beta}3$ in PLC-${\beta}3$ (-/-) cells resulted in an increase in pertussis toxin (PTx)-sensitive IPs in response to thrombin as well as to PAR1-specific peptide, while expression of PLC-${\beta}1$ in PLC-${\beta}1$ (-/-) cells did not have any effect on IP generation. The thrombin-induced $[Ca^{2+}]_i$ increase was delayed and attenuated in PLC-${\beta}3$ (-/-) cells, but normal in PLC-${\beta}1$ (-/-) cells. Pertussis toxin evoked a delayed $[Ca^{2+}]_i$ increase in PLC-${\beta}3$ (-/-) cells as well as in PLC-${\beta}1$ (-/-) cells. These results suggest that activation of PLC-${\beta}3$ by pertussis toxin-sensitive G proteins is responsible for the transient $[Ca^{2+}]_i$ increase in response to thrombin, whereas the delayed $[Ca^{2+}]_i$ increase may be due to activation of some other PLC, such as PLC-${\beta}4$, acting via PTx-insensitive G proteins.

• Proceedings of the Korean Society for Food Science of Animal Resources Conference
• /
• 1997.06a
• /
• pp.103-103
• /
• 1997

• Proceedings of the Korean Society of Plant Pathology Conference
• /
• 2002.11a
• /
• pp.81.1-81
• /
• 2002

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2006.04a
• /
• pp.422-423
• /
• 2006

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.13
• /
• pp.5583-5584
• /
• 2015

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.1
• /
• pp.138-144
• /
• 2013

The automation technology for overlay welding is needed due to the occurrence of severe corrosion and abrasion on the surface of internal contact in different shape of fittings. In Korea, different shapes of fittings have been manufactured by using the imported equipment of overlay welding automation at some companies. Thus the research on the development of overlay welding automation system (in short, OWAS) for a large L-type tube is urgently needed. In this paper, the investigation is focused on the optimal design of a supporting base for the (currently developing) OWAS of large L-type tube. Specifically we assume that the base which supports the equipment during the process of overlay welding is loaded as self-weight in the direction of gravity through static analysis especially when it is rotated 180 degree on the OWAS. For optimal design of a supporting base for OWAS of large L-type tube, Solidworks(R) (for 3-dimensional modelling) and ANASYS Workbench(R) (for structural analysis) are incorporated so as to proceed an optimization routines based on Response Surface Method (RSM) and Design of Experiment (DOE). In more specific, DOE finds out major factors (or dimensions) of the supporting base by using MINITAB(R). Then the regression equations between design variables (the major factors of supporting base) and response variables (deformation, stress and safety factor for the supporting base), which will be resulted in by RSM, verify the major factors of DOE. In the next step, Central Composite Design (CCD) plans 20 simulations of ANASYS Workbench(R) and then figures out the optimal values of design variables which will be reflected on the manufacturing of supporting base. Finally welding experiment is conducted to figure out the influence of overlay welding quality in applying the optimized design values of supporting base to the actual OWAS.

• Journal of Sensor Science and Technology
• /
• v.13 no.5
• /
• pp.356-362
• /
• 2004

In this study, we developed the measuring system based on light addressable potentiometric sensor for the quantitative analysis of penicillin that is very important element in medicine and pharmacy, clinic. It is investigated the response characteristics by enzyme reaction with penicillinase. First, the surface pre-treatment process of the $Si_{3}N_{4}$ was established. The coupling agent was made using self assembled monolayer method and it was confirmed the immobilization process by AFM. Also, as the measuring system, potentiostat, signal processing part etc. was made by Lab VIEW software, it was reduced detecting time as well as simplifying the system. Fabricated device was shown excellent pH response characteristics, 57 mV/ pH in the range of pH $2{\sim}11$. The response characteristics was 60 mV/decade in the range of $0.1{\sim}10{\;}mM$.

• Preventive Nutrition and Food Science
• /
• v.22 no.1
• /
• pp.37-44
• /
• 2017

Sulfur-containing amino acids play important roles in good flavor generation in Maillard reaction of non-enzymatic browning, so aqueous model systems of glucosamine and cysteine were studied to investigate the effects of reaction temperature, initial pH, reaction time, and concentration ratio of glucosamine and cysteine. Response surface methodology was applied to optimize the independent reaction parameters of cysteine and glucosamine in Maillard reaction. Box-Behnken factorial design was used with 30 runs of 16 factorial levels, 8 axial levels and 6 central levels. The degree of Maillard reaction was determined by reading absorption at 425 nm in a spectrophotometer and Hunter's L, a, and b values. ${\Delta}E$ was consequently set as the fifth response factor. In the statistical analyses, determination coefficients ($R^2$) for their absorbance, Hunter's L, a, b values, and ${\Delta}E$ were 0.94, 0.79, 0.73, 0.96, and 0.79, respectively, showing that the absorbance and Hunter's b value were good dependent variables for this model system. The optimum processing parameters were determined to yield glucosamine-cysteine Maillard reaction product with higher absorbance and higher colour change. The optimum estimated absorbance was achieved at the condition of initial pH 8.0, $111^{\circ}C$ reaction temperature, 2.47 h reaction time, and 1.30 concentration ratio. The optimum condition for colour change measured by Hunter's b value was 2.41 h reaction time, $114^{\circ}C$ reaction temperature, initial pH 8.3, and 1.26 concentration ratio. These results can provide the basic information for Maillard reaction of aqueous model system between glucosamine and cysteine.

• Earthquakes and Structures
• /
• v.15 no.2
• /
• pp.133-144
• /
• 2018

To study the effectiveness of sliding isolation in a CRLSS (concrete rectangular liquid-storage structure) and develop a reasonable limiting-device method, dynamic responses of non-isolation, sliding isolation with spring limiting-devices and sliding isolation with steel bar limiting-devices are comparatively studied by shaking table test. The seismic response reduction advantage of sliding isolation for concrete liquid-storage structures is discussed, and the effect of the limiting-device type on system dynamic responses is analyzed. The results show that the dynamic responses of sliding isolation CRLSS with steel bar-limiting devices are significantly smaller than that of sliding isolation CRLSS with spring-limiting devices. The structure acceleration and liquid sloshing wave height are greatly influenced by spring-limiting devices. The acceleration of the structure in this case is close to or greater than that of a non-isolated structure. Liquid sloshing shows stronger nonlinear characteristics. On the other hand, sliding isolation with steel bar-limiting devices has a good control effect on the structural dynamic response and the liquid sloshing height simultaneously. Thus, a limiting device is an important factor affecting the seismic response reduction effect of sliding isolation. To take full advantage of sliding isolation in a concrete liquid-storage structure, a reasonable design of the limiting device is particularly important.

• The Plant Pathology Journal
• /
• v.23 no.3
• /
• pp.193-202
• /
• 2007

Typical susceptible symptoms of the bacterial pustule disease caused by Xanthomonas axonopodis pv. glycines are pustule and chlorotic haloes that usually occur in leaves of Glycine max plants. The soybean genotype 'PI96188' showed an atypical response to all tested races X. axonopodis pv. glycines, accompanied with necrosis without chlorotic haloes on the underside of the necrotic symptoms. X. axonopodis pv. glycines 8ra grew to levels from 10 to 100 fold lower on PI96188 than on susceptible cultivar Jinjoo1, but 10-fold higher than on the resistant cultivar CNS. The chlorophyll content in PI96188 leaves remained unchanged until 12 days after bacterial infection. Ultrastructural observation showed that the infected leaf cells of PI96188 had intact normal chloroplasts compared to those of the susceptible cultivar Jinjoo1. Chloroplast degradation or the absence of chloroplasts in cells of the infected tissues was observed in Jinjoo1. Senescence-related ACS7 gene was significantly induced in PI96188 compared to those in Jinjoo1 at 2 days after inoculation. While photosynthesis-related rbcS gene showed the dramatic change in Jinjoo1, this gene was constitutively expressed in PI96188. However, expression of the defense-related genes, such as peroxidase and isoflavone synthase in the infected PI96188 leaves was similar to that in Jinjoo1. Together, these results suggest that the novel necrotic symptom in PI96188 is a kind of resistant response different from a typical hypersensitive response in the resistant genotypes.