• Earthquakes and Structures
• /
• v.11 no.4
• /
• pp.539-561
• /
• 2016

The rate of occurrence of intraplate earthquake events has been surveyed around the globe to ascertain the average level of intraplate seismic activities on land. Elastic response spectra corresponding to various levels of averaged (uniform) seismicity for a return period of 2475 years have then been derived along with modifying factors that can be used to infer ground motion and spectral response parameters for other return period values. Estimates derived from the assumption of uniform seismicity are intended to identify the minimum level of design seismic hazard in intraplate regions. The probabilistic seismic hazard assessment presented in the paper involved the use of ground motion models that have been developed for regions of different tectonic and crustal classifications. The proposed minimum earthquake loading model is illustrated by the case study of Peninsular Malaysia which has been identified with a minimum effective peak ground acceleration (EPGA) of 0.1 g for a return period of 2475 years, or 0.07 g for a notional return period of 475 years.

• Geomechanics and Engineering
• /
• v.6 no.1
• /
• pp.79-98
• /
• 2014

This paper presents an experimental and numerical study on the evaluation of a thermal response test using a precast high-strength concrete (PHC) energy pile and a closed vertical system with W-type ground heat exchangers (GHEs). Field thermal response tests (TRTs) were conducted on a PHC energy pile and on a general vertical GHE installed in a multiple layered soil ground. The equivalent ground thermal conductivity was determined by using the results from TRTs. A simple analytical solution is suggested in this research to derive an equivalent ground thermal conductivity of the multilayered soils for vertically buried GHEs. The PHC energy pile and general vertical system were numerically modeled using a three dimensional finite element method to compare the results with TRTs'. Borehole thermal resistance values were also obtained from the numerical results, and they were compared with various analytical solutions. Additionally, the effect of ground thermal conductivity on the borehole thermal resistance was analyzed.

• Journal of Mechanical Science and Technology
• /
• v.16 no.2
• /
• pp.203-210
• /
• 2002

For effective response surface modeling during sequential approximate optimization (SAO), the normalized and the augmented D-optimality criteria are presented. The normalized D-optimality criterion uses the normalized Fisher information matrix by its diagonal terms in order to obtain a balance among the linear-order and higher-order terms. Then, it is augmented to directly include other experimental designs or the pre-sampled designs. This augmentation enables the trust region managed sequential approximate optimization to directly use the pre-sampled designs in the overlapped trust regions in constructing the new response surface models. In order to show the effectiveness of the normalized and the augmented D-optimality criteria, following two comparisons are performed. First, the information surface of the normalized D-optimal design is compared with those of the original D-optimal design. Second, a trust-region managed sequential approximate optimizer having three D-optimal designs is developed and three design problems are solved. These comparisons show that the normalized D-optimal design gives more rotatable designs than the original D-optimal design, and the augmented D-optimal design can reduce the number of analyses by 30% - 40% than the original D-optimal design.

• Journal of Sensor Science and Technology
• /
• v.20 no.6
• /
• pp.412-419
• /
• 2011

In this paper, we used the inter-bit noise detection method in order to reduce the effects of noise light in a visible light identification system that uses a visible LED as a carrier source. A visible light identification system consists of a reader and a transponder. When the enable signal from the reader is detected, the transponder encodes the response data in RZ(Return-to-Zero) bit stream and sends response signal by modulating a visible LED. The reader detects the response signal mixed with noise light, samples the noise voltage in each blank low time between data bits of the RZ signal, and recovers the original data by subtracting the sampled noise from the received signal. In experiments, we improved the signal-to-noise ratio by 20dB using the inter-bit noise detection method.

• Asian-Australasian Journal of Animal Sciences
• /
• v.10 no.3
• /
• pp.284-288
• /
• 1997

Purified diets containing five graded levels of tryptophan were fed to growing chicks to evaluate tryptophan requirements for growth and maintenance. A model was developed to separate tryptophan requirement for maintenance from requirement for growth. From this model, the daily tryptophan requirement for growth was 2.16 mg/g gain, and the daily requirement for maintenance 0.029 times metabolic body size ($Wg^{0.75}$). Based on nitrogen gain response, the tryptophan requirement for growth was 0.078 mg/mg N gain, and the daily maintenance requirement was 0.029 times metabolic body size. The total tryptophan requirements were 71.56 mg/day or 0.173% of the diet, 69.48 mg/day or 0.168% of the diet based on the weight gain response and nitrogen gain response, respectively. Previous tryptophan requirements for growing chicks aging 1-28 days are in close agreement with these estimates. Based on the relationship of weight gain and N gain, about 1.25% of the retained CP was consisted of tryptophan; the previously reported value of tryptophan content of chick muscle CP was 1.03%.

• Asian-Australasian Journal of Animal Sciences
• /
• v.10 no.3
• /
• pp.277-283
• /
• 1997

Purified diets containing five levels of methionine with 0.4% cystine were fed to growing chicks (8 days old male Arbor Acre strain) to evaluate methionine requirements for growth and maintenance. A model was developed to separate methionine requirement for maintenance from requirement for growth. From this model the daily methionine requirement for growth was 4.22 mg/g gain, and the daily methionine requirement for maintenance was 0.034 times metabolic body size ($W^{0.75}$). Based on nitrogen gain response, the methionine requirement for growth was 0.162 mg/mg N gain, and the daily maintenance requirement was 0.037 times metabolic body size. The plateau of plasma methionine concentration reached at 117.16 mg intake pre day. The total methionine requirement determined based on weight gain response was 138.29 mg/day or 0.33% of the diet and the one determined based on nitrogen gain response was 141.7 mg/day of 0.34% of the diet, respectively. As a percentage of protein, methionine was calculated to be 2.6%; the reported methionine content of carcass CP was 1.76%.

• Earthquakes and Structures
• /
• v.15 no.4
• /
• pp.395-402
• /
• 2018

Floor location of adjacent buildings may be different in terms of height elevation, and thus, the slab may hit on the columns of adjacent insufficiently separated buildings during severe ground motions. Such impacts, often referred to as mid-column pounding, can be catastrophic. Substantial pounding damage or even total collapse of structures was often observed in large amount of adjacent low rise buildings. The research on the mid-column pounding between low rise buildings is in urgency need. In present study, the responses of two adjacent low rise buildings with unequal heights and different dynamic properties have been analyzed. Parametric studies have also been conducted to assess the influence of story height difference, gap distance and input direction of ground motion on the effect of structural pounding response. Another emphasis of this study is to analyze the near-fault effect, which is important for the structures located in the near-fault area. The analysis results show that collisions exhibit significant influence on the local shear force response of the column suffering impact. Because of asymmetric configuration of systems, the structural seismic behavior is distinct by varying the incident directions of the ground motions. Results also show that near-fault earthquakes induced ground motions can cause more significant effect on the pounding responses.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.3
• /
• pp.361-369
• /
• 2018

This paper proposes a design of asymmetric time division multiple access method for tactical radio communication. Typical tactical radio communication has a limited execution of transmission, because uplink message requires more extended response time than downlink message. In order to solve this problem, this paper analyzes operational environment of Korean tactical radio communication and proposes an asymmetric TDMA based on it for performance of tactical communication. The simulation model is used to investigate constraints of real experiments for proving effectiveness of the proposed approach. Simulations results show that the proposed scheme outperforms the conventional scheme in terms of throughput, response time, and delay.

• Food Science and Biotechnology
• /
• v.18 no.2
• /
• pp.494-499
• /
• 2009

To improve phenylalanine ammonia lyase (E.C.4.3.1.5-PAL) activity in recombinant Escherichia coli, Some approaches for improving phenylalanine ammonia lyase (PAL) activity in recombinant E. coli were developed following preliminary studies by means of response surface method. The results shown that permeabilization with combination of Triton X-100, cetyl trimethyl ammonium bromide (CTAB), and acetone enriched cellular recombinant PAL activity significantly, which improved over 10-fold as compared with the control (untreat cell), as high as 181.37 U/g. The optimum values for the tested variables were Triton X-100 0.108 g/L, CTAB 0.15 g/L, and acetone 45.2%(v/v). Furthermore, a second-order model equation was suggested and then validated experimentally. It was indicated that addition of surfactants and organic solvents made the cells more permeable and therefore allowed easier access of the substrate to the enzyme and excretion of the product, which increased the rate of transport of L-phenylalanine and trans-cinnamic acids. These improved methods of PAL activity enrichment could serve as a rich enzyme source, especially in the biosynthesis of L-phenylalanine.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.10
• /
• pp.3592-3596
• /
• 2011

A novel poly(vinylchloride)-based membrane sensor using $N^1$,$N^3$,$N^5$-tris(2-(2,3-dihydroxybenzylamino)-ethyl)cyclohexane-1,3,5-tricarboxamide (CYCOENCAT, L) as ionophore has been prepared and explored as $Fe^{3+}$ selective electrode. The membrane electrode composed of ionophore, poly(vinylchloride) and o-nitropheyloctyl ether in the optimum ratio 4:33:63 gave excellent potentiometric response characteristics, and displayed a linear log[$Fe^{3+}$] versus EMF response over a wide concentration range of $1.0{\times}10^{-5}-1.0{\times}10^{-1}$ M with super nernstian slope of 28.0 mV/decade and the detection limit of $8.0{\times}10^{-6}$ M. The proposed ion selective electrode showed fast response time (< 15 s), wide pH range (3.0-7.0), high non-aqueous tolerance (up to 20%) and adequate long life time (120 days). It also exhibited very good selectivity for $Fe^{3+}$ relative to a wide variety of alkali, alkaline earth, transition and heavy metal ions. Further, the analytical applicability of the sensor was tested as an indicator electrode in the potentiometric titration of $Fe^{3+}$ with EDTA.