• Journal of KSNVE
• /
• v.6 no.6
• /
• pp.749-754
• /
• 1996

In this paper, a design method of matching layers is presented for the sandwich type broad band underwater acoustic vibrators. The characteristic impedances of matching layers are determined to be matched to the characteristic impedance of head mass material. For the dynamic characteristic analysis of the sandwich type transducers, one dimensional FEM technique is also introduced. A test vibrator with the quarter wave matching layers has been designed to verify the proposed method. And the wide band characteristics of the input impedance and transmitting voltage response (TVR) are investigated.

• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.185.2-185.2
• /
• 2005

• Transactions on Electrical and Electronic Materials
• /
• v.10 no.2
• /
• pp.53-57
• /
• 2009

In this paper we develop a method to observe faults in semiconductor devices and transmission lines by calculating the variation of the reflection function in a dielectric microstrip line that has an open-ended termination containing an optically induced plasma region. It is analyzed with the assumption that the plasma is distributed homogeneously in laser illumination. With the non linear material of degradation, the concentration of the carrier in the part of the material has changed. Since the input wave has produced the phenomenon of reflection, the input signal to the open-ended microstrip lines can be observed on reflection to identify the location of the fault. The characteristic impedances resulting from the presence of plasma are evaluated by the transmission line model. The variation of the reflection wave in the microwave system has been calculated by using an equivalent circuit model. The transient response has been also evaluated theoretically for changing the phase of the variation in the reflection. The variation of characteristic response in differentially localized has been also evaluated analytically.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.4
• /
• pp.651-657
• /
• 2012

In many control fields high position performance is essentially required in reducing the over-shoot phenomena which is produced by improving the quick response in starting and in minimizing the variation of the response characteristic on disturbance and load variation In this paper, the design method for a position control is suggested for constructing the PI-PD controllers by using an internal PD feedback loop in PI and PD control system. Applying this method to the position control system used a DC servo motor as a driver, the transfer PI and PD controllers are designed simultaneously and the coefficients of these controllers are determined by using the transfer function of a plant and a proportional coefficient from mathematical technique. From the result of computer simulation in PI-PD control system by applying this control technique, we can verify the usefulness of this method in rejecting of over-shoot of starting, compensating of response variation on the load variation, and shorting the settling time.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.10
• /
• pp.1648-1654
• /
• 2016

This paper analyzes complex vector current control for the enhanced cross-coupling compensation in accordance with parameter variation in grid-connected inverter system, and verifies through simulation and experiment. Complex vector current control is performed in the synchronous reference frame through d-q transformation. It generates cross-coupling components with rotating nominal angular frequency. In general, cross-coupling elements are compensated by decoupling terms added to output of conventional decoupling PI controller. But, it is impossible to compensate them perfectly which transient response is especially deteriorated such as large overshoot and slow tracking, when variation of grid impedance or measurement error occurs. However, complex vector current control can improve stability and response characteristic of current control regardless of the situation as before. Decoupling controller and complex vector controller are represented through complex forms, and these controllers are analyzed by using frequency response in s-domain, respectively. It is verified that complex vector controller has more superior response characteristic than decoupling controller through MATALB, PSIM and experimental in 5kW grid-connected inverter when L filter parameter is varied from 1.1mH to increase double, 2.2mH.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1993.06a
• /
• pp.165-168
• /
• 1993

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.04a
• /
• pp.55-60
• /
• 2004

The paper describes measurement techniques for an acoustic transfer characteristic of ship's bridge stimulated by a whistle sound. The response sounds, according to the opening-shutting conditions of bridge doors for T／S ‘SAENURI’, are measured by B＆K 2260D equipment, and then extracted the frequency responses by B＆K 7830 software. To evaluate the measured transfer characteristic, the 128th order FIR (Finite Impulse Response) filters, containing the frequency characteristic, are constructed based on the frequency sampling-based design method. Using evaluation indexes with six scales, psychological assessments by five subjects are carried out with test sounds which are convolved source sound and FIR filters. As results of tests, the test sounds gives A／sub s／=3.3∼4.7 which means the psychological sense of 'it is almost similar sound as original ones in a real world', and thus it is cleary seen tint the proposed method can be suit for the measurement of an acoustic transfer characteristic of ship's bridg.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1998.10a
• /
• pp.117-124
• /
• 1998

New Thrie-Beam guardrail section has been developed. The Characteristic of its geometry, energy absorbing capability and response to impact has been studied and compared with those of conventional W-Beam guardrail system. To compare the response to impact computer simulation using Barrier Ⅶ program was made. Stretch tests and static loading tests were conducted for the performance verifications.

• Journal of Korean Society for Quality Management
• /
• v.27 no.1
• /
• pp.165-194
• /
• 1999

Taguchi's parameter design seeks proper choice of levels of controllable factors (Parameters in Taguchi's terminology) that makes the qualify characteristic of a product optimal while making its variability small. This aim can be achieved by response surface techniques that allow flexibility in modeling and analysis. In this article, a collection of response surface modeling and analysis techniques is proposed to deal with the multiresponse optimization problem in experimentation with Taguchi's signal and noise factors.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.278-278
• /
• 2022

Recently, the yield potential of high yield Tongil-type rice varieties has greatly increased, reaching 817kg/10a(Geumgang No.1). Moreover, in order to promote rice consumption and strengthen the competitiveness of the rice processing industry, the R&D of high yield Tongil-type rice varieties for each processing purpose, such as rice noodles, grain feed and industrial materials, has been continuously carried out. However, because Tongil-type rice varieties or lines are generally very vulnerable to cold damage, cold tolerance test can be said to be absolutely necessary to improve the cultivation safety. This study is the result of the seedling and field cold tolerance characteristic tests carried out in 2021 of high yield Tongil-type rice breeding lines. For the cold tolerance characteristic test of seedlings, total 303 high yield rice breeding lines for processing were treated in cold water of 13℃ and irrigation depth of 4cm for 10 days from the third-leaf age, then it was evaluated by comparing the degree of discoloration and withering with the checked varieties(Boramchan, Hanahreum No.2). Also, for the test of field, total 186 high yield rice breeding lines for processing were treated in cold water of 17℃ by keeping pouring day and night from 30 days after transplanting to ripening stage, then it was evaluated by comparing the degree of discoloration, delay of heading, shortening rate of stem length and percent of fertile grain etc. with the checked varieties. And the cold tolerance evaluative criteria were classified as strong(1~3), medium(4~6) and weak(7~9) in overall cold tolerance. (Seedling test) As for the degree of cold tolerance of the check variety, 'Boramchan' and 'Hanahreum No.2' showed a response of 'medium' and 'weak', respectively. However, there was no 'strong' line in the high yield rice breeding lines, 2 lines showed a 'medium' response, and 301 lines showed a 'weak' response. Therefore, except for a few lines(0.7%), most lines(99.3%) showed a 'weak' response. (Field test) In terms of the overall cold tolerance of the check variety, both 'Boramchan' and 'Hanahreum No.2' showed a 'medium' response. Similarly, there was no 'strong' line in the case of high yield rice breeding lines, 20 lines showed a 'medium' response, and 166 lines showed a 'weak' response. Therefore, except for some(10.8%) lines, most(89.2%) lines showed a 'weak' response. From the above results, we selected about 100 individuals with less seed shattering and degeneration of the ear tip, and with a relatively high percent of fertile grain, and are continuing to select lines with improved cold tolerance in the F4~F5 group in this year. As such, most of the Tongil-type rice varieties have poor cold tolerance and thus have low cultivation safety at low temperatures. However, it is important to select improved lines through generational progress because there are some lines that still have a certain level of cold tolerance among them.