• 제목/요약/키워드: Response capability improvement

검색결과 57건 처리시간 0.027초

MnO2 Nanowires Electrodeposited in a Porous Network of Agarose Gel as a Pseudocapacitor Electrode

  • Jin, Sohyun;Ryu, Ilhwan;Lim, Geo;Yim, Sanggyu
    • Journal of Electrochemical Science and Technology
    • /
    • 제11권4호
    • /
    • pp.406-410
    • /
    • 2020
  • Despite a simple preparation of manganese oxide (MnO2) nanowires by electrodeposition, the improvement in specific capacitance (Csp) and voltammetric response of the MnO2 nanowire-based electrodes has been quite limited. This is attributed to the poor electrical conductivity of MnO2 and its dense bulk morphology due to the aggregation of the nanowires. This study investigated the capacitive performance of MnO2 nanowires electrodeposited on agarose thin films. The good ionic conductivity and porous network of the agarose film provided favorable growth conditions for the MnO2 nanowires with suppressed aggregation. A maximum Csp value of 686 F/g measured at a scan rate of 10 mV/s was obtained, which was significantly larger than that of 314 F/g for the agarose-free MnO2 electrode at the same scan rate. The rate capability was also improved. The Csp measured at a high scan rate of 100 mV/s retained 74.0% of the value measured at 10 mV/s, superior to the retention of 71.1% for the agarose-free MnO2 electrode.

우리나라 가족교육 전문인력의 양성과 관리방안을 위한 기초연구 (A Basic Study on a Management Plan for Family Education Professionals in Korea)

  • 송현애
    • 가정과삶의질연구
    • /
    • 제34권2호
    • /
    • pp.51-64
    • /
    • 2016
  • Family education service for healthy families has increased steadily over the past ten years since the Healthy Family Act was enacted. The Purpose of this study aims to investigate the current state of family education professionals such as family life educators and healthy family specialists, and also suggest a management plan for them. The data used was collected from literature regarding family life educators and healthy family specialists, reports and home pages of Ministry of Gender Equality and Family, Korean Institute for Healthy Family, Healthy Family Support Center in Seoul and Gyeonggi-do, Korean Association of Family Relations, etc. The major suggestions are as follows: 1) empowerment of family education professionals, 2) development of the workplace for family education professionals, 3) development and promotion of various education programs for families, 4) improvement of the capability of family education professionals response to a low fertility-ageing society, 5) collaborative networking between family life educators and healthy family specialists. This study contributes to provide insights on how to train and manage family education professionals.

3-way형과 Bypass형 서보유압 피에조 인젝터의 구동특성 비교 (Comparison Analysis of Dynamic Characteristics of Servo-hydraulic Piezo-driven Injector between 3-way and Bypass-circuit Type)

  • 조인수;정명철;이진욱
    • 한국자동차공학회논문집
    • /
    • 제21권5호
    • /
    • pp.169-175
    • /
    • 2013
  • CRDi technology of diesel engine was developed from in the early 2000s due to a need to increase fuel efficiency and environment care. Especially, high-pressure fuel injection system in CRDi system which has a fuel injection unit including an injector, a fuel pump and common-rail, etc. becomes possible to make the exhaust gas clean as well as power improvement. In this study, comparison of dynamic characteristics of servo-hydraulic piezo-driven injector with 3-way and bypass-circuit type was analyzed by using the AMESim code. As results of this study, it found the bypass-circuit inside servo-hydraulic piezo injector can cause a faster injection response than that of the 3-way type. Also it was shown that bypass-circuit type had better control capability due to hydraulic bypass system.

Finite element modeling of reinforced concrete beams externally bonded with PET-FRP laminates

  • Rami A. Hawileh;Maha A. Assad;Jamal A. Abdalla; M. Z. Naser
    • Computers and Concrete
    • /
    • 제33권2호
    • /
    • pp.163-173
    • /
    • 2024
  • Fiber-reinforced polymers (FRP) have a proven strength enhancement capability when installed into Reinforced Concrete (RC) beams. The brittle failure of traditional FRP strengthening systems has attracted researchers to develop novel materials with improved strength and ductility properties. One such material is that known as polyethylene terephthalate (PET). This study presents a numerical investigation of the flexural behavior of reinforced concrete beams externally strengthened with PET-FRP systems. This material is distinguished by its large rupture strain, leading to an improvement in the ductility of the strengthened structural members compared to conventional FRPs. A three-dimensional (3-D) finite element (FE) model is developed in this study to predict the load-deflection response of a series of experimentally tested beams published in the literature. The numerical model incorporates constitutive material laws and bond-slip behavior between concrete and the strengthening system. Moreover, the validated model was applied in a parametric study to inspect the effect of concrete compressive strength, PET-FRP sheet length, and reinforcing steel bar diameter on the overall performance of concrete beams externally strengthened with PET-FRP.

다중 모듈러스 자기복원 등화의 오차 역동성 증강에 따른 수렴 특성 분석 (Convergence Property Analysis of Multiple Modulus Self-Recovering Equalization According to Error Dynamics Boosting)

  • 오길남
    • 한국산학기술학회논문지
    • /
    • 제17권1호
    • /
    • pp.15-20
    • /
    • 2016
  • 기존의 다중 모듈러스 기반 자기복원 등화 유형은 등화 초기에 적용되지 못하고 정상상태 성능 개선에 활용되었다. 본 논문에서는 다중 모듈러스를 원하는 응답으로 하는 유형의 자기복원 등화에서, 오차를 증강하여 오차의 역동성을 확장함으로써 초기 수렴 성능을 개선하고, 그 특성을 분석하였다. 제안 방법에서 오차 증강은 등화기 출력에 대한 심볼 판정에 비례하여 이루어진다. 아울러 제안 방법은 오차 역동성의 확장으로 인한 초기 수렴 기능을 갖기 때문에, 초기 수렴속도와 정상상태 오차 레벨에서 우수한 성능을 보인다. 특히 제안 방법은 등화의 전 과정을 하나의 알고리즘으로 진행하므로 기존의 다른 동작 모드로의 전환이나 선택 방법, 또는 다른 알고리즘과의 동시 동작 등이 불필요하다. 다중경로 전파와 부가 잡음이 있는 채널 조건하에서 이루어진 고차 신호점에 대한 자기복원 등화의 성능 분석 시뮬레이션을 통해 제안 방법의 유용성을 검증하였다.

RELAP5/MOD2 코드에 의한 대형냉각재 상실사고 모사실험 L2-3의 열수력 현상 예측 (Prediction of Thermal-Hydraulic Phenomena in the LBLOCA Experiment L2-3 Using RELAP5/MOD2)

  • Bang, Young-Seok;Chung, Bub-Dong;Kim, Hho-Jung
    • Nuclear Engineering and Technology
    • /
    • 제23권1호
    • /
    • pp.56-65
    • /
    • 1991
  • RELAP5/MOD2 Cycle 36.04코드를 이용하여 LOFT대형냉각재 상실사고 모사실험 L2-3를 계산함으로써 코드의 대형냉각재상실사고에 관련된 열수력현상 예측능력을 평가하였다. 기본계산에서 원자로 압력용기는 이중노심유로와 분리강수관 모델로 모사되었다. 기본계산의 결과 계통의 전반적인 수력학적 거동과 감압기간동안 노심 고출력 부위에서의 열적 거동은 비교적 타당하게 예측되었다. 한편 과냉각-이상유동의 천이 기간동안 임계유량모델, 고질량유속에서의 임계열유속 상관식, 감압기간중의 재접수(Blowdown Rewet)의 판정기준등 코드의 모델/상관식의 부분적 결함이 발견되었다. 이 결함들에 의해 냉각재 재고량이 과대 평가되어 재환수기간의 노심의 열적거동 예측의 정확도가 감소되었다. RELAP5/MOD2 Cycle 36.04로 부터 개선된 코드를 사용한 계산 결과 재접수 현상의 예측 정확도를 개선할 수 있었다.

  • PDF

중국군의 해양작전능력과 한국군의 과제 (PRC Maritime Operational Capability and the Task for the ROK Military)

  • 김민석
    • Strategy21
    • /
    • 통권33호
    • /
    • pp.65-112
    • /
    • 2014
  • Recent trends show that the PRC has stepped aside its "army-centered approach" and placed greater emphasis on its Navy and Air Force for a wider range of operations, thereby reducing its ground force and harnessing its economic power and military technology into naval development. A quantitative growth of the PLA Navy itself is no surprise as this is not a recent phenomenon. Now is the time to pay closer attention to the level of PRC naval force's performance and the extent of its warfighting capacity in the maritime domain. It is also worth asking what China can do with its widening naval power foundation. In short, it is time to delve into several possible scenarios I which the PRC poses a real threat. With this in mind, in Section Two the paper seeks to observe the construction progress of PRC's naval power and its future prospects up to the year 2020, and categorize time frame according to its major force improvement trends. By analyzing qualitative improvements made over time, such as the scale of investment and the number of ships compared to increase in displacement (tonnage), this paper attempts to identify salient features in the construction of naval power. Chapter Three sets out performance evaluation on each type of PRC naval ships as well as capabilities of the Navy, Air Force, the Second Artillery (i.e., strategic missile forces) and satellites that could support maritime warfare. Finall, the concluding chapter estimates the PRC's maritime warfighting capability as anticipated in respective conflict scenarios, and considers its impact on the Korean Peninsula and proposes the directions ROK should steer in response. First of all, since the 1980s the PRC navy has undergone transitions as the focus of its military strategic outlook shifted from ground warfare to maritime warfare, and within 30 years of its effort to construct naval power while greatly reducing the size of its ground forces, the PRC has succeeded in building its naval power next to the U.S.'s in the world in terms of number, with acquisition of an aircraft carrier, Chinese-version of the Aegis, submarines and so on. The PRC also enjoys great potentials to qualitatively develop its forces such as indigenous aircraft carriers, next-generation strategic submarines, next-generation destroyers and so forth, which is possible because the PRC has accumulated its independent production capabilities in the process of its 30-year-long efforts. Secondly, one could argue that ROK still has its chances of coping with the PRC in naval power since, despite its continuous efforts, many estimate that the PRC naval force is roughly ten or more years behind that of superpowers such as the U.S., on areas including radar detection capability, EW capability, C4I and data-link systems, doctrines on force employment as well as tactics, and such gap cannot be easily overcome. The most probable scenarios involving the PRC in sea areas surrounding the Korean Peninsula are: first, upon the outbreak of war in the peninsula, the PRC may pursue military intervention through sea, thereby undermining efforts of the ROK-U.S. combined operations; second, ROK-PRC or PRC-Japan conflicts over maritime jurisdiction or ownership over the Senkaku/Diaoyu islands could inflict damage to ROK territorial sovereignty or economic gains. The PRC would likely attempt to resolve the conflict employing blitzkrieg tactics before U.S. forces arrive on the scene, while at the same time delaying and denying access of the incoming U.S. forces. If this proves unattainable, the PRC could take a course of action adopting "long-term attrition warfare," thus weakening its enemy's sustainability. All in all, thiss paper makes three proposals on how the ROK should respond. First, modern warfare as well as the emergent future warfare demonstrates that the center stage of battle is no longer the domestic territory, but rather further away into the sea and space. In this respect, the ROKN should take advantage of the distinct feature of battle space on the peninsula, which is surrounded by the seas, and obtain capabilities to intercept more than 50 percent of the enemy's ballistic missiles, including those of North Korea. In tandem with this capacity, employment of a large scale of UAV/F Carrier for Kill Chain operations should enhance effectiveness. This is because conditions are more favorable to defend from sea, on matters concerning accuracy rates against enemy targets, minimized threat of friendly damage, and cost effectiveness. Second, to maintain readiness for a North Korean crisis where timely deployment of US forces is not possible, the ROKN ought to obtain capabilities to hold the enemy attack at bay while deterring PRC naval intervention. It is also argued that ROKN should strengthen its power so as to protect national interests in the seas surrounding the peninsula without support from the USN, should ROK-PRC or ROK-Japan conflict arise concerning maritime jurisprudence. Third, the ROK should fortify infrastructures for independent construction of naval power and expand its R&D efforts, and for this purpose, the ROK should make the most of the advantages stemming from the ROK-U.S. alliance inducing active support from the United States. The rationale behind this argument is that while it is strategically effective to rely on alliance or jump on the bandwagon, the ultimate goal is always to acquire an independent response capability as much as possible.

고속 처리와 성능 향상을 위한 LDPC 코드 기반 결정 궤환 등화기 (Decision Feedback Equalizer Based on LDPC Code for Fast Processing and Performance Improvement)

  • 김도훈;최진규;유흥균
    • 한국전자파학회논문지
    • /
    • 제23권1호
    • /
    • pp.38-46
    • /
    • 2012
  • 본 논문에서는 OFDM 시스템에서 고속 처리와 성능 향상을 위한 LDPC 코드 기반 결정 궤환 등화기(Decision Feedback Equalizer: DFE)를 제안한다. LDPC 코드는 우수한 오류 정정 능력과 Shannon의 채널 용량에 근접하는 성능을 갖는다. 그러나, 많은 parity 검사 행렬과 반복 횟수를 가진다는 단점이 있다. 제안된 시스템에서는 판정된 신호와 복호기 사이의 신호의 MSE(Mean Square Error)를 등화기로 피드백한다. 이러한 방법을 사용하면 추정된 채널 응답을 보정해 주기 때문에 성능을 향상시킬 수 있다. 또한, 동일한 성능에서 피드백이 포함되지 않은 시스템보다 낮은 반복 횟수를 갖기 때문에 시스템의 복잡도를 줄일 수 있다. 시뮬레이션을 통해 다중 경로 채널에서 CFO(Carrier Frequency Offset)와 위상 잡음이 고려된 OFDM 시스템의 성능을 평가하여 제안 시스템의 우수성을 보인다.

SOAP 메시지 처리 개선과 NBTM을 사용한 모바일 웹 서버의 성능 향상 (Mobile Web Server Performance Improvement with Enhancing SOAP Message Transaction and NBTM)

  • 김용태;정윤수;박길철;이상호
    • 한국컴퓨터정보학회논문지
    • /
    • 제13권5호
    • /
    • pp.135-142
    • /
    • 2008
  • 최근의 급속하게 변화하는 모바일 인터넷 환경에서 이전의 웹 서버 성능으로는 사용자의 빈번한 연결 요구에 대해 적절한 대응이 어렵기 때문에 웹 서비스 엔진의 성능 향상이 필요하다. 따라서 본 논문은 웹 서비스의 성능 향상을 위해서 부가적으로 설치하는 톰캣 서블릿 컨테이너와 무관하게 사용자의 접속 요청을 처리하고, SOAP(Simple Object Access Protocol) 메시지 처리 시간을 단축하는 모바일 웹 서비스의 서버 구조를 제안한다. 제안한 웹 서버 구조는 사용자요구 수신기, 웹 문서 처리기, SOAP 프로토콜 처리기, NBTM(Non-Blocking and Thread Manager) 관리자, 세션 관리자로 구성한다. 제안된 시스템은 표준 램 서비스 프로토콜을 완전하게 지원하고, 웹2.0의 모바일 웹서비스 시스템의 통신 오버헤드와 메시지 처리 시간, 서버의 오버헤드를 감소하며, 웹2.0 환경에서 구현 실험을 통한 지연 수행 평가에 의해서 웹2.0표준 모바일 웹 서비스 시스템과 성능을 비교, 평가하여 성능 향상을 확인하였다.

  • PDF

화학적 초미세 발포 사출성형을 이용한 에어컨 드레인 펜의 공정 최적화에 대한 연구 (A study on the process optimization of microcellular foaming injection molded air-conditioner drain pen)

  • 김주권;곽재섭;김준민;이준한;김종선
    • Design & Manufacturing
    • /
    • 제11권2호
    • /
    • pp.1-8
    • /
    • 2017
  • In this study, we applied microcellular foaming injection molding process to improve the performance of system air-conditioner drain fan which had been produced by injection molding process and studied the optimization of process conditions through 6-sigma process and response surface method (RSM) to reduce weight and deformation of products. Additive type, melt temperature, mold temperature, and injection screw shape were selected as the factor affecting the weight and deformation of the products by carrying out analysis of trivial many through ANOVA and design of experiment (DOE) method. Among the effect factor, we set the addictive type to Long G/F and screw shape to foaming screw which had the highest level of weight reduction and deformation reduction. The amount of foaming agent gas was set at 60 ml, which was the limit beyond which the weight of product did not decrease any more. For melt temperature and mold temperature, we studied the conditions where both weight and deformation were minimized using the RSM. As a result, we set the melt temperature to $250^{\circ}C$, fixed mold temperature to $20^{\circ}C$, and moving mold temperature to $40^{\circ}C$. The improvement effect was analyzed by appling the selected optimal conditions to the production process using the microcellular foaming injection molding. The results showed that the mean weight of product was measured to be 1,420g which was 19% lower than that measured in the current process. The standard deviations of the weights were found to be similar to those in the current process and it showed a low dispersion. The mean deformation was measured to be 0.9237mm, which represented a 57% reduction compared to the mean deformation in the current process, and the standard deviation decreased from 0.3298mm to 0.1398mm. Moreover, we analyzed the process capability for deformation, and the results showed that the short-term process capability increased from 2.73 to 6.60 which was even higher than targeted level of 6.0.