• Structural Engineering and Mechanics
• /
• v.47 no.2
• /
• pp.227-245
• /
• 2013

The term "constructability" in regard to cast-in-place concrete construction refers mainly to the ease of reinforcing steel placement. Bar congestion complicates steel placement, hinders concrete placement and as a result leads to improper consolidation of concrete around bars affecting the integrity of the structure. In this paper, a multi-objective approach, based on the non-dominated sorting genetic algorithm (NSGA-II) is developed for optimal design of reinforced concrete cantilever retaining walls, considering minimization of the economic cost and reinforcing bar congestion as the objective functions. The structural model to be optimized involves 35 design variables, which define the geometry, the type of concrete grades, and the reinforcement used. The seismic response of the retaining walls is investigated using the well-known Mononobe-Okabe analysis method to define the dynamic lateral earth pressure. The results obtained from numerical application of the proposed framework demonstrate its capabilities in solving the present multi-objective optimization problem.

• Journal of Satellite, Information and Communications
• /
• v.10 no.2
• /
• pp.75-79
• /
• 2015

In this study, we investigated the electro-optical (EO) characteristic of fringe-field switching (FFS) mode cell by the ion beam alignment method on the a-C:H thin film. The suitable inorganic thin films for FFS cell and the aligning capabilities of nematic liquid crystal (NLC) using the new alignment material of a-C:H thin film were studied. An excellent voltage-transmittance (V-T) and response time curve of the ion beam aligned FFS-LCD was observed with oblique ion beam exposure on the a-C:H thin films. Also, the V-T hysteresis characteristics of the ion beam-aligned FFS-LCD with IB exposure on the a-C:H thin films is almost the same as that of the rubbing-aligned FFS cell on a polyimide surface.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.11
• /
• pp.2033-2048
• /
• 1992

This paper presents the theoretical development and qualitative evaluation of a new concept in the mathematical modeling of dynamic structures. We use both test data and analytical approximations to identify the parameters of an incomplete model. The model has the capability of predicting the response of the points of interest on the structure over the frequency range of interest and can be used to predict the changes in natural frequencies and normal modes due to structural changes. The theory was tested by running simulated tests on a relatively simple structure, identifying the parameters of the incomplete model, and using this model to predict the effects on frequency and mode shapes of several mass and stiffness changes. The conditions of the tests were varied by selecting different numbers of points of measurement, varying the frequency range, and by including assumed measurement error. It is recommended that the theoretical development be continued and that applications to more complex structures be carried out in order to develop a better understanding of the limitations and capabilities of the method. A successful, more definitive sevaluation could lead to immediate practical applications.

• Smart Structures and Systems
• /
• v.4 no.2
• /
• pp.247-259
• /
• 2008

The potential use of Cu-based shape memory alloys (SMA) in retrofitting historical monuments is investigated in this paper. This study is part of the ongoing work conducted in Tunisia within the framework of the FP6 European Union project (WIND-CHIME) on the use of appropriate modern seismic protective systems in the conservation of Mediterranean historical buildings in earthquake-prone areas. The present investigation consists of a finite element simulation, as a preliminary to an experimental study where a cantilever masonry wall, representing a part of a historical monument, is subjected to monotonic and quasi-static cyclic loadings around a horizontal axis at the base level. The wall was retrofitted with an array of copper SMA wires with different cross-sectional areas. A new model is proposed for heat-treated copper SMAs and is validated based on published experimental results. A series of nonlinear finite element analyses are then performed on the wall for the purpose of assessing the SMA device retrofitting capabilities. Simulation results show an improvement of the wall response for the case of monotonic and quasi-static cyclic loadings.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.337-341
• /
• 2004

This paper concerns the analytical modeling and dynamic analysis of advanced rotating blade structure implemented by a dual approach based on structural tailoring and viscoelastic materials technology. Whereas structural tailoring uses the directionality properties of advanced composite materials, the passive materials technology exploits the damping capabilities of viscoelastic material(VEM) embedded into the host structure. The structure is modeled as a composite thin-walled beam incorporating a number of nonclassical features such as transverse shear, warping restraint, anisotropy of constituent materials, and warping and rotary inertias. The VEM layer damping treatment is modeled by using the Golla-Mushes-McTavish(GHM) method, which is employed to account for the frequency-dependent characteristic o the VEM. The displayed numerical results provide a comprehensive picture of the synergistic implications of the application of both techniques, namely, the tailoring and damping technology on vibration response of thin-walled beam structure exposed to external time-dependent excitations.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11b
• /
• pp.358-361
• /
• 2001

A new photoalignment material PMI5CA, poly{N-(phenyl)maleimide-co-3-[4-(pentyloxy) cinnamate]propyl-2-hydroxy-1-methacrylate}, was synthesized and the electra-optical (EO) characteristics in the vertical-aligned (VA) liquid crystal display (LCD) photo-aligned on the photopolymer surface were studied. Excellent voltage-transmittance(V-T) characteristics in the VA-LCD photoaligned with polarized UV exposure of oblique direction on the pohotopolymer surfaces for 1 min can be achieved. The transmittance of the VA-LCD photoaligned on the photopolymer surface decreased with increasing UV exposure time. We suggest that the decrease of transmittance in the VA-LCD photoaligned on the photopolymer surface is attributed to the dissociation of the ester linkage in the photodimerized cinnamate structure with increasing UV exposure time

• Journal of the Korean Operations Research and Management Science Society
• /
• v.41 no.1
• /
• pp.55-69
• /
• 2016

In response to drastic environmental changes, companies have been continuously rebalancing their resources and capabilities to sustain their competitive status or to survive difficult times. The aim of this study is to analyze the effect of sudden environmental changes on the competitive status of a firm and to identify the internal factors that differentiate sustainer and non-sustainer groups. To achieve this goal, we selected 85 representative IT and non-IT companies from the S&P 500 companies and investigated them with respect to the change in their five-year competitive status since the 2008 global financial crisis. As a concrete performance measure, the concept of perceived competitive status (PCS) was introduced, and four distinct PCS categories were identified by using the stock price changes during the selected period. The four distinct PCS categories are "sustaining," "drifting," "deep sunken," and "bouncing back." Discriminant analysis was performed on these four distinct PCS categories. The empirical study conducted showed that revenue and cost efficiency are the most discriminating factors, especially in the economic recovery period. In particular, stronger financial liquidity was observed in high-performing "bouncing back" companies than in the other category companies.

• Journal of Korean Society of Water and Wastewater
• /
• v.31 no.5
• /
• pp.383-388
• /
• 2017

The $4^{th}$ Industry Revolution was advocated by Klaud Schwab who is founder of World Economic Forum at the Davos Forum in 2016, and there are big differences on ICT based $4^{th}$ Industry revolution in the aspects of speed, scope and impact compared with the 3rd Industry revolution. Creating new industries and values through technology such as internet of things, cloud, big data, and artificial intelligence are included in the meaning of The $4^{th}$ industry revolution. In this article, the direction of change to water technology in response to the $4^{th}$ Industry revolution is surveyed. 4G Water Infra should minimize environmental impact under the consideration of sustainable development and advanced technologies. To solve the existing water infra problems, it is common and fundamental that the intake water from nature can be regarded as borrowed from nature and it should be returned to natural state with improved water quality. Government, academic organizations and industries should prepare and collaborate together in order to help our country with outstanding capabilities in infrastructure construction and ICT to lead the 4G water technology development.

• Transactions on Control, Automation and Systems Engineering
• /
• v.3 no.1
• /
• pp.10-14
• /
• 2001

We studied the use of time-related information, with and without prediction, to support human operators performing moni-toring and control tasks in the process. Based on monitoring and control techniques used for Project Management we developed a display design for the process industries. A simulated power plant was used to test the hypothesis that availability of predictions along with information on past trends can improve the performances of the human operator handling faults. Several designs of dis-plays were tested in the experiment in which human operators had to detect and handle two types of faults(local and systems wide) in the simulated electricity generation process. Analysis of the results revealed that temporal data, with and without prediction, signifi-cantly reduced response time. Our results encourage the integration of temporal information and prediction in displays used for the control processes to enhance the capabilities of the human operators. Based on the analysis we proposed some guidelines for the de-signer of the human interface of a process control system.

• International Commerce and Information Review
• /
• v.13 no.4
• /
• pp.411-433
• /
• 2011

This article investigates the impacts of firms' regulatory compliance and voluntary innovation activities in environmental management on the development of their organizational capabilities and the enhancement of their performance, within the Korean context. The study invokes a structural equation analysis. The results indicate that voluntary innovation activity in response to market pressures makes a significant contribution to the development of firm-specific organizational capability and the enhancement of firms' performance, but regulatory compliance activity does not significantly affect either organizational capability or performance. This capability was also seen to have implications for firm's performance. This article also suggests several policy implications related to the research.