• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.19 no.1
• /
• pp.1-7
• /
• 2009

To establish the Fourier-Transform Infra-Red spectrophotometry(FTIR) Direct-On-Filter(DOF) technique as a useful analytical method for quartz in respirable dust samples, an influence of the kaolinite should be corrected. Respirable dust, created in a dust chamber containing the standard material of quartz and kaolinite were collected using a cyclone equipped with a 25 mm, $0.8\;{\mu}m$ pore size DM filter as a collection medium. This study was designed to compare three methods of correction for kaolinite when quantifying the content of quartz, including the least square, the optimum choice and the spectral subtraction methods. The content of quartz in the respirable dust samples was overestimated by 6.2% when mixed with kaolinite(35.5% by weight). The content of quartz containing kaolinite(72.8% by weight) were overestimated by 32%. The spectral subtraction method underestimated the quartz content by 1.5%, while the other two correction methods, the optimum choice and the least square method, overestimated the quartz content by 1.9% to 6.4% and 0.04 to 1.1%, respectively. The results of this study are suggested that, when correcting for effects of kaolinite on quantitative analysis of quartz in respirable dust by FTIR direct-on-filter method, the least square method produce the most unbiased results be compared with those of other correction methods.

• Journal of Environmental Health Sciences
• /
• v.43 no.3
• /
• pp.185-193
• /
• 2017

Objectives: An on-site study was conducted in order to quantify indoor exposure levels and the emission rate of particulate matter for domestic poultry buildings. Materials and methods: Three types of poultry building (caged layer house, broiler house, and layer house with manure belt) as classified by mode of manure treatment and ventilation were investigated in this study. Nine sites per each poultry building were selected and visited for measuring exposure levels and emission rate of particulate matter. Total dust and respirable dust among the particulate matter were analyzed based on the weight method. Emission rates were estimated by dividing emission amount, which was calculated through multiplying indoor concentration ($mg/m^3$), by the ventilation rate ($m^3/h$), into indoor area ($m^2$) and number of poultry reared in the poultry building. Results: Mean exposure levels for total dust and respirable dust in the poultry buildings were $3.91({\pm}1.99)mg/m^3$ and $1.99({\pm}0.89)mg/m^3$, respectively. The emission rates of particulate matter in the poultry buildings were estimated as $4.75({\pm}1.22)mg\;head^{-1}h^{-1}$ and $64.39({\pm}24.95)g\;m^{-2}h^{-1}$ for total dust and $0.58({\pm}0.23)mg\;head^{-1}h^{-1}$ and $7.52({\pm}2.51)mg\;m^{-2}h^{-1}$ for respirable dust, respectively. The distribution patterns for total dust and respirable dust were similar regardless of poultry building type. Among poultry buildings, broiler house showed the highest exposure level and emission rate of total dust and respirable dust, followed by layer house with manure belt and caged layer house. Conclusions: The finding that the broiler house showed the highest exposure level and emission rate of particulate matter can be attributed to sawdust utilized as bedding material, which can be dispersed into the air by movements of the chickens. Thus, a work environmental management solution for optimally reducing dust concentrations is necessary for broiler houses.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.25 no.2
• /
• pp.194-201
• /
• 2015

Objectives: The purpose of this study is to assess the exposure level to dust and airborne microorganisms among employed workers in a clothing shopping center. Materials and Methods: On-site investigation of a clothing shopping center was performed between October and November 2012. The hazardous substances measured in this study are particulate matter(Total dust, respirable dust) and airborne microorganisms (Total airborne bacteria, total airborne fungi). Results: The highest geometric mean levels of particulate matter(total dust, respirable dust) for personal sampling were $1.735(SD:0.883)mg/m^3$ for total dust and $0.0711(SD:0.008)mg/m^3$ for respirable dust, respectively. Those for area sampling were $0.625(SD:0.091)mg/m^3$ for total dust and $0.0718(SD:0.012)mg/m^3$ for respirable dust, respectively. The highest geometric averaged concentrations of airborne microorganisms(Total airborne bacteria, total airborne fungi) were detected at $1,181(SD:105)cfu/m^3$ for total airborne bacteria and $683(SD:114)cfu/m^3$ for total airborne fungi, respectively. Concentrations of particulate matters and airborne microorganism in clothes shopping center did not correlate significantly with environmental factors such as temperature or relative humidity. Conclusions: Exposure levelshave not been established for service workers. Thus, health risk assessment for this group is very difficult. Health guidelines for service workers should be established as soon as possible.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.29 no.2
• /
• pp.259-269
• /
• 2019

Objective: This study was conducted to prepare fundamental data and assess the relationship between level of exposure to airborne respirable dust, chest radiation findings, and the results of pulmonary function tests among workers in a cloth manufacturing factory. Methods: The number of total subjects was 144 (124 female and 20 male) workers in a cloth manufacturing factory in the city of Busan. This study measured the concentration of airborne respirable dust by gravimetric analysis and performed pulmonary function testing, and got chest radiation findings from December 1, 2016 to March 31, 2017. Collected data was analyzed using the IBM SPSS statistical package program (ver. 24.0). Results: The mean concentration of respirable dust was the highest in the cutting process. The effecting factors on $FEV_1/FVC$ were age, sex, and working process. The effecting factors on chest radiation findings were doing no exercise and concentration of respirable dust. Conclusions: Based on the above results, the authors consider there to be a need to secure sufficient working space and improve the engineering systems, for example the overall or local ventilation, in order to minimize the exposure to respirable dust. Health education and health promotion activities should also be improved in order to maintain optimal health status. The authors expect further studies to be performed on pulmonary function testing, chest radiation findings, and symptoms related to pulmonary function, including continuous observation, among workers in a cloth manufacturing factory.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.3 no.2
• /
• pp.227-239
• /
• 1993

The author selected 77 dust emissing processes from 71 types of industries which placed in Sasang Industrial Complex in Pusan. The level of total dust was measured as areal concentration and personal exposure concentration by low volume air sampler and personal air sampler, respectively. Collected samples were classified into 5 groups (chemicals and rubber product, metal product, sawmills and wood, foundries and others). Respirable particulate and total dust of areal and personal exposure were analyzed. The results were as follows; 1. All of the respirable dust concentration and total dust of areal and personal concentration were log-normally distributed. 2. Geometric mean of respirable particulate of personal exposure concentration measured $0.55mg/m^3$ in the first group, $0.86mg/m^3$ in the second group, $0.39mg/m^3$ in the third group, $0.81mg/m^3$ in the forth group and $0.52mg/m^3$ in the fifith group. The exceed rates over TLV (thehold limit values) of total dust were 31.3% in the first group, 31.3% in the second group, 70% in the third group, 80% in the forth group and 13.3% in the fifth group. 3. There were singnificant difference between areal and personal exposure concentration and personal exposure concentration was higher than that of area. 4. In the case of high ratio of respirable particulate to total dust, pneumoconiosis incidence was high even though the workshop was opened and emissing dust concentration was low. These findings suggest that it is desirable to measure respirable particulate in environmental assessment of dust emissing workshops.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.4 no.1
• /
• pp.81-95
• /
• 1994

This study was performed in a diatomite factory where silicosis had been found at October, 1993. The major objectives were to evaluate worker exposure to diatomaceous earth and to present engineering control methods for workplace management. Total and respirable dust of diatomaceous earth were measured. Size distribution of dust was analyzed by applying the multiple diffraction method. Also crystalline silica in respirable dust samples was analyzed qualitatively by X-ray diffraction. The suitable Local Exhaust Ventilation systems for that factory were recommended. The results were as follows. The airborne total and respirable dust concentrations by exposure groups showed approximate normal distribution. The means of total dust exposures at flour maufacturing, fire brick grinding and packaging, ceramic raws packaging processes exceeded Korean and ACGIH standards, $10mg/m^3$. The means of total and respirable dust concentrations to high exposure groups were 6.8 and 3.9 times higher than those of low expousre groups, respectively. The size distribution of diatomaceous earth dust was lognormal with a median diameter of $7.07{\mu}m$(range, $0.10-60.0{\mu}m$) and with a geometric standard deviation of 1.43. The crystalline silica in respirable dust samples was identified to quartz and cristobalite and/or tridymite. Above results suggest that engineering controls and periodic environmental and medical surveillances will be important for preventing silicosis in the diatomite factory.

• Journal of Environmental Health Sciences
• /
• v.29 no.3
• /
• pp.43-49
• /
• 2003

ETS concentrations in the PC game rooms and factors affecting ETS concentrations were measured. Nicotine, 3-EP, respirable dust and UVPM were used as tracers for ETS. ETS concentrations are 2-3 times higher than those of other results. The concentration of ETS at the commercial district was higher than that of the residential district. The correlations between these tracers and SD/ ACH, a factor affecting to ETS concentration, were calculated. The correlation between 3-ethenylpyridine among tracers and SD/ACH was highest. The correlation between respirable dust and SD/ ACH was lowest. It was difficult to recommend respirable dust as a tracer of ETS.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.23 no.2
• /
• pp.75-83
• /
• 2013

Objectives: This study was conducted to estimate quartz concentrations in the airborne respirable dust from concrete manufacturing industries and to compare performance of two analytical methods, direct on filter(DOF) and the transfer methods in the Fourier Transform Infrared Spectroscopy(FTIR). Methods: Total 36 area samples were collected from 8 concrete manufacturing industries. Each respirable dust sample was collected by a 25 mm cassette attached to a 10 mm Dorr-Oliver nylon cyclone. The quartz content was estimated using the intensity of the absorption peak of quartz at $799cm^{-1}$ by FTIR. Results: By the comparison of quartz content in respirable dust between the two methods, the results of using DOF method were higher than that of transfer method. And the result of quartz concentrations in respirable dust estimated by DOF method were mostly higher than those by transfer method. Statistically significant difference of quartz concentrations in respirable dust were not found in shakeout, input, loading and transporting processes by two methods. But quartz concentrations in the molding process had the statistically significant difference between DOF and transfer method. Conclusions: The results of the study is suggested that, it be needed to correct the influence of the interferences in order to establish the DOF method when interfering minerals have an effect on quantitative analysis of quartz in respirable dust by the direct on filter method with FTIR.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.27 no.3
• /
• pp.163-169
• /
• 2017

Objectives: This study was conducted toestimate quartz concentrations and contents in the airborne respirable dust from various industries. Methods: A total of 818 samples were collected from 174 industries. Respirable dust samples were collected using a cyclone equipped with a 37 mm, $5{\mu}m$ pore size PVC filter. The quartz concentrations were identified using the intensity of the absorption peak of quartz at $799cm^{-1}$ by Fourie Transformed Infrared Spectroscopy(FTIR). Results: The respective geometric means for quartz concentrations in the respirable dust were 0.0050, 0.0049, 0.0025, and $0.0019mg/m^3$ in foundries, ceramics, construction, and cement/stone. The geometric mean of quartz contents analyzed by FTIR were respectively 3.43, 1.99, 1.04, and 0.82% for ceramics, foundries, cement/stone, and construction. The rate of exceeding the Korean Occupational Exposure Limit($0.05mg/m^3$) was 2.03%, but rate of exceeding the American Conference of Governmental Industrial Hygienist(ACGIH) Threshold Limit Value($0.025mg/m^3$) was 7.12%. Conclusions: Given that foundries had a higher quartz concentration, there is a need to reduce respirable dust, such as through wet operation. In order to protect the health of workers exposed to mineral dust, it is necessary to actively consider strengthening the Korean Occupational Exposure Limit.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.33 no.3
• /
• pp.284-290
• /
• 2023

Objectives: Work environment assessments were conducted to investigate epidemiologically several cases of lung cancer and COPD (chronic obstructive pulmonary disease) among workers in domestic quarries. Methods: We visited three quarries in South Korea where an epidemiological investigation was requested and measured total dust, respirable dust, and crystalline silica on rock drilling workers (4 people) and rock chipping workers (13 people). Measurement and analysis were conducted according to NIOSH (National Institute for Occupational Safety & Health) method 0500, NIOSH method 0600 for respirable dust, and NIOSH method 7500 for crystalline silica. Results: Among rock drilling workers the AMs (arithmetic mean) of total dust concentrations, respirable dust concentrations, and crystalline silica concentrations were 3.462 mg/m³ (range: 0.764~6.085 mg/m³), 0.613 mg/m³ (range: 0.153~1.251 mg/m³), and 0.105 mg/m³ (range: 0.012~0.228 mg/m³), respectively. Among rock chipping workers, the AMs of total dust concentrations, respirable dust concentrations, and crystalline silica concentrations were 2.446 mg/m³ (range: 0.156~8.494 mg/m³), 0.488 mg/m³ (range: 0.028~1.536 mg/m³), and 0.099 mg/m³ (range: 0.004~0.274 mg/m³), respectively. Conclusions: Although it cannot be said that the dust concentrations were high for both rock drilling workers and rock chipping workers, the concentrations of crystalline silica were found to be high. If such work is performed for a long period of time, diseases such as lung cancer and COPD may occur, so the work environment needs to be improved.