• 한국의류산업학회지
• /
• 제23권2호
• /
• pp.174-185
• /
• 2021

The purpose of the study is to establish sustainability evaluation items that can be applied to enhance clothing sustainability practice. The sustainability evaluation items related to clothing by product category, use, and disposal were derived through literature review. In order to evaluate the validity of the derived evaluation items, preliminary survey and two questionnaires were conducted for experts, and the importance and the possibility of change were measured. As a result, 39 evaluation items were constructed. Among the 39 evaluation items, 26 items related to the use and disposal were evaluated for 10 weeks in the 20s and 30s female consumers in terms of practice. The results of the study are as follows: First, items that have a high degree of importance and possibility of change are the items that can minimize resource saving, recycling, and the emission of harmful substances. Second, the participants' perceptions, attitudes, and outcomes of practicing the evaluation items of the use and disposal phase were proved to be positively affected, and the possibility of reducing resource saving and environmental impacts was proved. The clothing sustainability practice played a positive and developmental role in real life, while changing from small things to pursuing newness. The vagueness of sustainability was changed to specific perceptions and behaviors through the practice of the evaluation items.

• 자원ㆍ환경경제연구
• /
• 제20권1호
• /
• pp.99-118
• /
• 2011

산업부문에서 '저탄소 녹색성장'의 달성 가능성은 기존 화석연료 사용의 의존도를 줄이는 것이 장기적으로 산업 생산성의 향상으로 이어질 수 있느냐에 달려 있다고 볼 수 있다. 본 연구에서는 국내 제조업을 대상으로 에너지절약시설에 대한 투자가 산업 생산성에 미치는 장단기 파급효과를 분석하는 이론적 모형을 제시하고 계량분석기법을 통하여 통계적 유의성 유무를 검증하였다. 에너지절약시설에 투자할 경우 단기적으로는 투자지출이 늘어나 생산비용이 증가하는 '측정효과'와 기술혁신을 위한 신규투자가 지연되는 부(負)의 '실질효과', 장기적으로는 에너지집약도가 개선되어 생산비용이 절감되는 정(正)의 '실질효과' 등이 나타날 수 있다. 산업 생산성의 변화를 설명하는 데 있어서 에너지절약시설 투자규모의 내생성 문제를 해결하기 위하여 2SLS 회귀분석을 실시하였다. 생산액 대비 에너지 투입비용이 상대적으로 높은 제조업 5개 부문을 대상으로 1982년~2006년까지의 연도별 자료를 사용하여 에너지절약시설 투자의 생산성 파급효과 여부를 검증한 결과 화학제품산업을 제외하고 4개 부문에서는 해당 추정계수의 통계적 유의성이 기각되었다. 화학제품산업의 경우 부(負)의 '실질효과'가 정(正)의 '실질효과'를 압도하며 에너지절약시설 투자비용 대비 에너지비용 절감효과는 상대적으로 미미한 것으로 나타났다.

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2009년도 학술발표대회
• /
• pp.175-176
• /
• 2009

Energy saving and environment-friendly dyeing method of cotton with reactive dyes is the ultra low liquor ratio dyeing because it reduces the total quantity of water, dye, salt and alkali during the dyeing process in the effluent as well as the energy consumption. However, this method may not guarantee the quality of the dyeing results due to the specs or unlevel dyeing depending upon the dyes used. The study has focused on the effect of leveling agents in the dyeing of cotton with reactive dyes under the ultra low liquor ratio (1:5). Especially Sunfix N/B MF-D which was selected for ULLR showed low-leveled dyeing comparing with the other MF-D series. A leveling agent having polycarbonate structure increased LDF values of Sunfix N/B MF-D without changing of dyeing fastness. We recommend some leveling agents to improve the leveling behavior for ULLR dyeing.

• Journal of Electrical Engineering and Technology
• /
• 제11권4호
• /
• pp.987-992
• /
• 2016

This study introduces an example environment where wireless devices are mobile, devices use dynamic voltage scaling, devices and tasks are heterogeneous, tasks have deadline, and the computation and communication power is dynamically changed for energy saving. For this type of environment, the efficient system-level energy management and resource management for task completion can be an essential part of the operation and design of such systems. Therefore, the resources are assigned to tasks and the tasks may be scheduled to maximize a goal which is to minimize energy usage while trying to complete as many tasks as possible by their deadlines. This paper also introduces mobility of nodes and variable transmission power for communication which complicates the resource management/task scheduling problem further.

• 에너지공학
• /
• 제20권3호
• /
• pp.216-223
• /
• 2011

본 논문에서는 다양한 공장과 빌딩에서 조명제어시스템을 대상으로 계측 및 검증(M&V) 방법을 사용하여 효율적인 에너지 절약 방법을 제시한다. 에너지 가격을 줄이기 위해서는 전력피크시간에 제어가능한 다양한 수요자원을 고려하는 필요하지만, 일반적으로 빌딩에서 고려되는 수요자원은 피크전력이다. 본 논문에서는 M&V 방법을 사용하여 전력소비량을 줄일 수 있는 새로운 에너지절약방법을 제안하고 현장계측시스템을 구성하고 시뮬레이션 방법을 통해 제안된 방법이 효과적임을 확인한다.

• 한국태양에너지학회 논문집
• /
• 제31권5호
• /
• pp.105-112
• /
• 2011

The purpose of this study was to analyze and compare the management group' and the teaching group' perception of energy education in Korea. For this purpose, this study carried out a questionnaire survey at schools participating in the energy saving policy. The data was collected from six managers and 171 teachers in middle schools. First, the results indicated that both the management group and teachers have a considerable interest in teaching energy saving practice. How ever the management group showed more preference toward teacher-leading courses, such as lecture, compared to the teachers Second, both the management group and teachers tended to take extracurricular activities. Third, the manager group mostly got energy educational resource from the teacher training program, textbook and teacher's companion. However the teachers mostly did from the mass media. Fourth, compared to the teachers, the managers preferred to allot more budgets to school facilities than to activities related to educating students related to energy. Fifth, the management group pointed out curriculum-making and more budget as the necessity to enhance energy education but the teaching groups did students' interest. Sixth, both the management group and teachers emphasis on the need of energy education.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 춘계학술대회 논문집
• /
• pp.246-249
• /
• 2007

It is very important that there are saving resource and energy in the future as well as in these day. Weight saving of structural parts, which are formed by extrusion, plays a key role in manufacturing field. Extruded aluminum parts' cross sections are constant in the axial direction by conventional extrusion method. Especially these aluminum parts used in the car need other processes to vary the cross section in the axial direction. Thus, applications of these parts are limited by high cost. if the cross section of the parts is variable by only extrusion, application of extruded aluminum parts will more increase. Therefore, a new CNC extruder which can control the section area of a car part was invented the nation's first. Using the extrusion machine, the experiment was performed to validate the workability.

• 가정과삶의질연구
• /
• 제19권1호
• /
• pp.111-129
• /
• 2001

This study was performed to develope a money management education program for elementary school students graded from 3 to 6 in order to enhance their money management skill. Based on the developmental stages of the children, this program covered five financial issues such as value of money, financial planning, allowance planning, saving and investment, and consuming and purchasing. Total 15 specific education programs were developed. The contents included in each program were value of money & economic circulation, types of money and the importance of money management, the issues related on choice and resource use, long-term and short-term planning, the relationship between occupation and earnings, career planning, budgeting, the reasons and types of saving, understanding of interest, investment methods, the functions of market and trade, intra family income distribution, consumptions, and consumer decision making process.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 추계학술대회 논문집
• /
• pp.128-131
• /
• 2007

It is very important that there are saving resource and energy in the future as well as in these day. Weight saving of structural parts, which are formed by extrusion, plays a key role in manufacturing field. Especially these aluminum parts used in the car need other processes to vary the cross section in the axial direction. Thus, applications of these parts are limited by high cost. if the cross section of the parts is variable by only extrusion, application of extruded aluminum parts will more increase. Therefore, a new CNC extruder which can control the section area of a car part was invented the nation's first. Using the extrusion machine, the experiment and FE analysis were performed during the varied section extrusion process.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제18권1호
• /
• pp.211-232
• /
• 2024

In this paper, we consider the resource allocation and offloading decisions of device-to-device (D2D) cooperative UAV-assisted mobile edge computing (MEC) system, where the device with task request is served by unmanned aerial vehicle (UAV) equipped with MEC server and D2D device with idle resources. On the one hand, to ensure the fairness of time-delay sensitive devices, when UAV computing resources are relatively sufficient, an optimization model is established to minimize the maximum delay of device computing tasks. The original non-convex objective problem is decomposed into two subproblems, and the suboptimal solution of the optimization problem is obtained by alternate iteration of two subproblems. On the other hand, when the device only needs to complete the task within a tolerable delay, we consider the offloading priorities of task to minimize UAV computing resources. Then we build the model of joint offloading decision and power allocation optimization. Through theoretical analysis based on KKT conditions, we elicit the relationship between the amount of computing task data and the optimal resource allocation. The simulation results show that the D2D cooperation scheme proposed in this paper is effective in reducing the completion delay of computing tasks and saving UAV computing resources.