• 제목/요약/키워드: Resource Reduction

검색결과 769건 처리시간 0.028초

Solidification of uranium mill tailings by MBS-MICP and environmental implications

  • Niu, Qianjin;Li, Chunguang;Liu, Zhenzhong;Li, Yongmei;Meng, Shuo;He, Xinqi;Liu, Xinfeng;Wang, Wenji;He, Meijiao;Yang, Xiaolei;Liu, Qi;Liu, Longcheng
    • Nuclear Engineering and Technology
    • /
    • 제54권10호
    • /
    • pp.3631-3640
    • /
    • 2022
  • Uranium mill tailing ponds (UMTPs) are risk source of debris flow and a critical source of environmental U and Rn pollution. The technology of microbial induced calcium carbonate precipitation (MICP) has been extensively studied on reinforcement of UMTs, while little attention has been paid to the effects of MICP on U & Rn release, especially when incorporation of metakaolin and bacillus subtilis (MBS). In this study, the reinforcement and U & Rn immobilization role of MBS -MICP solidification in different grouting cycle for uranium mill tailings (UMTs) was comprehensively investigated. The results showed that under the action of about 166.7 g/L metakaolin and ~50% bacillus subtilis, the solidification cycle of MICP was shortened by 50%, the solidified bodies became brittle, and the axial stress increased by up to 7.9%, and U immobilization rates and Rn exhalation rates decrease by 12.6% and 0.8%, respectively. Therefore, the incorporation of MBS can enhance the triaxial compressive strength and improve the immobilization capacity of U and Rn of the UMTs bodies solidified during MICP, due to the reduction of pore volume and surface area, the formation of more crystals general gypsum and gismondine, as well as the enhancing of coprecipitation and encapsulation capacity.

대칭섹터 간 주파수 간섭 감소를 위한 편파분리 및 자원 제어 방법 (Antenna Polarization Isolation and Resource Control for Frequency Interference Reduction Between Opposite Sectors)

  • 서성원;이성민;김용신
    • 한국통신학회논문지
    • /
    • 제40권6호
    • /
    • pp.1014-1023
    • /
    • 2015
  • 본 논문은 대칭섹터 간 주파수 재사용에 따른 주파수 간섭 감소를 위한 편파 분리 및 자원 제어방법에 대한 것이다. 기지국 장비가 운용되면서 발생하는 대칭섹터 간 주파수 간섭을 감소시키기 위한 실험을 진행하였다. 기지국 장비는 대칭섹터에서 같은 주파수를 재사용 하는 구조로 In-Band 주파수 간섭이 야기된다. 따라서 주파수 간섭을 최소화하기 위해 본 논문에서는 2가지 방안을 제시하였다. 첫 번째로 대칭섹터의 안테나 편파 분리 방법이다. 편파 분리 방법을 사용함으로 CINR이 17dB에서 27dB로 약 10dB의 향상되었다. 두 번째 방법은 기지국 링크별 자원을 제어하는 방법으로 링크별 RF 송신출력을 정렬하여 자원을 할당하는 방법과 링크별 RF 송신출력 제어범위를 조정하는 방법이 있다. 본 논문에서는 제안된 두 가지 방안을 사용하여 주파수 재사용하는 구조에서 주파수 간섭을 줄일 수 있는 방안을 제시하였다.

The Effects of the Electronic Health Record System on Work Overload and Stress Moderation of Hospital Employees

  • Choi, Young-Jin;Noh, Jin-Won;Boo, Yoo-Kyung
    • 산경연구논집
    • /
    • 제9권9호
    • /
    • pp.35-44
    • /
    • 2018
  • Purpose - In endless competition, companies pursue cost reduction and work efficiency. So, entrepreneurs try to increase job intensity, which may lead to job stress and high turnovers because of job burnout. But, Information systems are acknowledged as a work support tool that secures work convenience and the productivity of employees. In this study, we aimed to confirm the effects of information systems in reduing the work overload of employees in a human resource intensive industry. Research design, data and methodology - This is based on the job demands-resources model, conducting an empirical analysis of surveys given to hospital employees working in a human resource intensive industry. Results - The research revealed that information systems reduced the work overload of employees in a human resource intensive industry. Conclusion - This study confirmed the effects of information systems as a job resource based on JD-R theory, and presentation of empirical results indicated that information systems alleviate employee job overload and increases job satisfaction in the medical services industry. In the medical services industry, using electronic health record system decreases in work overload, which results in employees gaining time for self-development and time management, reducing job stress, and leading to job satisfaction.

Conversion of organic residue from solid-state anaerobic digestion of livestock waste to produce the solid fuel through hydrothermal carbonization

  • Yang, Seung Kyu;Kim, Daegi;Han, Seong Kuk;Kim, Ho;Park, Seyong
    • Environmental Engineering Research
    • /
    • 제23권4호
    • /
    • pp.456-461
    • /
    • 2018
  • The solid-state anaerobic digestion (SS-AD) has promoted the development and application for biogas production from biomass which operate a high solid content feedstock, as higher than 15% of total solids. However, the digested byproduct of SS-AD can be used as a fertilizer or as solid fuel, but it has serious problems: high moisture content and poor dewaterability. The organic residue from SS-AD has to be improved to address these problems and to make it a useful alternative energy source. Hydrothermal carbonization was investigated for conversion of the organic residue from the SS-AD of livestock waste to solid fuels. The effects of hydrothermal carbonization were evaluated by varying the reaction temperatures within the range of $180-240^{\circ}C$. Hydrothermal carbonization increased the calorific value through the reduction of the hydrogen and oxygen contents of the solid fuel, in addition to its drying performance. Therefore, after the hydrothermal carbonization, the H/C and O/C atomic ratios decreased through the chemical conversion. Thermogravimatric analysis provided the changed combustion characteristics due to the improvement of the fuel properties. As a result, the hydrothermal carbonization process can be said to be an advantageous technology in terms of improving the properties of organic waste as a solid-recovered fuel product.

The Autophagy Protein CsATG8 is Involved in Asexual Development and Virulence in the Pepper Anthracnose Fungus Colletotrichum scovillei

  • Kwang Ho Lee;Adiyantara Gumilang;Teng Fu;Sung Wook Kang;Kyoung Su Kim
    • Mycobiology
    • /
    • 제50권6호
    • /
    • pp.467-474
    • /
    • 2022
  • Autophagy serves as a survival mechanism and plays important role in nutrient recycling under conditions of starvation, nutrient storage, ad differentiation of plant pathogenic fungi. However, autophagy-related genes have not been investigated in Colletotrichum scovillei, a causal agent of pepper fruit anthracnose disease. ATG8 is involved in autophagosome formation and is considered a marker of autophagy. Therefore, we generated an ATG8 deletion mutant, ΔCsatg8, via homologous recombination to determine the functional roles of CsATG8 in the development and virulence of C. scovillei. Compared with the wild-type, the deletion mutant ΔCsatg8 exhibited a severe reduction in conidiation. Conidia produced by ΔCsatg8 were defective in survival, conidial germination, and appressorium formation. Moreover, conidia of ΔCsatg8 showed reduced lipid amount and PTS1 selectivity. A virulence assay showed that anthracnose development on pepper fruits was reduced in ΔCsatg8. Taken together, our results suggest that CsATG8 plays various roles in conidium production and associated development, and virulence in C. scovillei.

서버 간 요청 위임을 고려한 XML 기반 RPC 자원 서비스 시스템 설계 및 구현 (Design and Implementation of Remote Procedure Call Resource Service System based on the XML Considering the Request Delegation between the Servers)

  • 김정희;곽호영
    • 한국멀티미디어학회논문지
    • /
    • 제6권6호
    • /
    • pp.1100-1110
    • /
    • 2003
  • 본 논문에서는 분산 환경의 자원 활용성과 처리의 효율성을 위하여 클라이언트의 요청(Request)이 서버간 위임되는 XML 기반 RPC 자원 서비스 시스템을 설계하고 구현한다. 이를 위해 클라이언트가 이용할 복수개의 서버들에 대한 요청 정보들은 XML의 DOM에 근거하여 XML 문서로 포장된 후 분산 환경의 서버로 전송되고, 서버는 XML-DOM을 받아들일 수 있는 객체를 사용하여 클라이언트의 요청을 처리하도록 한다. 또한 서버간 요청을 위임하기 위해 처리 결과를 바로 클라이언트에게 응답하지 않고 XML-DOM 구조 내에 저장하고, XML-DOM 정보 내의 또 다른 요청 정보에 따라 해당 서버로 클라이언트의 요청이 위임 되도록 한다. 또한 분산 환경의 자원 투명성을 위해 자원 저장소(Resource Repository)를 운영토록 한다. 시스템 구현 결과 RPC와 XML-RPC 서비스의 통합 및 서버 간 요청 위임으로 인한 응답 시간(Response Time)의 단축으로 자원 활용성과 처리의 효율성을 향상시켰으며, 부가적으로 클라이언트의 비동기성의 확장과 평 균 블록화를 줄일 수 있었다. 또한 클라이언트가 이용할 수 있는 자원에 대한 정보제공이 가능해 졌다.

  • PDF

한ㆍ중ㆍ일간 어업관리정책의 비교와 자원공동관리에 대한 검토 (The Comparative Research on the Fisheries Resource Management Policy of Korea, China and Japan)

  • 옥영수;최성애
    • 수산경영론집
    • /
    • 제29권1호
    • /
    • pp.65-88
    • /
    • 1998
  • The sustainable reduction of the fisheries resource is keenly raised an urgent problem of the fisheries policy in Korea, China and Japan. Then, 3 country, Korea, Japan, China, have established various system for fisheries resource management. Among these systems, qualitative fishing regulations have been commonly established. For example, its have been enforced to the prohibited fishing region, fishing period, fish size, net size, specified fishing methods. Also, different fisheries resource management policies have occasionally enforced by each country. For example, the prohibition of free sale and free possession has been established in Korea and Japan, but not China. And, In Korea, It has been enforced uniquely to entry system far fishing license number ana sea farming project for coastal fishing grounds by national government. The entry system for fishing license number has been enforced in Japan too, not national government, but local government. Nevertheless these three countries have put good system for fisheries resource management above mentioned, real enforcement has been not operated well. For efficient management on same fisheries, next problem will have been solved. First, it has to be guaranteed to transparency on the fisheries management, which is considered the priority problem on the fishing regulation. For reason, although efficient system is established in each country, if feasibility of the system was not trusted, mutual effort like that is very difficult to gain desired results. Then, each country has to establish transparency on the fisheries statistics and administration. Second, it has to be adjusting on the criteria or level of fisheries resource management. Now Korea, Japan and China have different criteria or level of fisheries resource management, for, example, prohibited fish size and prohibited fishing net sine. To solve above problems, three countries need to deeply discuss together. Then fisheries resource co-management scheme should be established in same fishing ground.

  • PDF

병목공정 자원할당 방식에 따른 강교 제작공장 생산성 차이 분석 (Analysis of Productivity Differences in Steel Bridge Manufacturing Plants According to Resource Allocation Methods for the Bottleneck)

  • 이재일;정은지;정근채
    • 한국건설관리학회논문집
    • /
    • 제24권2호
    • /
    • pp.37-49
    • /
    • 2023
  • 본 연구에서는 제조업 분야에서 보편적으로 활용되어 온 제약이론을 바탕으로 강교 제작공장의 생산성을 향상시키기 위한 자원할당 방법론을 제안한다. 이를 위해 도장 공정을 병목공정으로 정의한 후, 공정 전용 자원할당(OSRA), 제품 전용 자원할당(PSRA), 범용 자원할당(GRA) 등 3가지의 자원할당 방법론을 개발하였다. 강교 공급사슬 시뮬레이션 모델을 활용한 성능평가 실험 결과, GRA 방법론이 재공재고수(NWIP)와 대기시간(WT) 측면에서 가장 우수한 성능을 보였다. 특히, 강교 제작공장의 부하와 부하 변동성이 증가할수록 다른 두 전용 자원할당 방식과의 성능 격차는 더욱 커졌다. 평균적으로 GRA는 NWIP과 WT를 OSRA 대비 36.2%, 34.6%, PSRA 대비 71.0%, 70.4% 감소시켰다. 재공재고수와 대기시간의 감소는 병목현상의 완화를 의미하며, 이는 결국 강교 제작공장의 생산성이 향상되었음을 의미한다.

분해순서 구조 기술을 위한 모델 (Model for the description of disassembly sequence structure)

  • 박홍석;목학수;최흥원
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2001년도 춘계학술대회 논문집
    • /
    • pp.422-425
    • /
    • 2001
  • The realization of the avoidance, decrease and utilization of waste can be made through reduction of resource consumption during product production and use. Beside that it is desirable to regain the resource attached to products and components. The same resources can be much used in product and mater all cycle through their reuse and regeneration In order to improve the use productivity of resource the disassembly make up the substantial prerequisite. In this paper a model describing the disassembly sequence structure is introduced under consideration of the influential facts related to disassembly process planning rules for disassembly sequence planning are derived from that.

  • PDF

스위칭 동작 최소화를 통한 저 전력 자원할당 알고리즘 (A Low Poorer Resource Allocation Algorithm Based on Minimizing Switching Activity)

  • 신무경;인치호;김희석
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2001년도 하계종합학술대회 논문집(2)
    • /
    • pp.121-124
    • /
    • 2001
  • This paper proposed resource allocation algorithm for the minimum switching activity of functional unit in high level synthesis process as like DSP which is circuit to give many functional unit. The resource allocation method after scheduling use the power function calculating average hamming distance and switching activity of the between two input. First of all, the switching activity is calculated by the input value after calculating the average hamming distance between operation. In this paper, the proposed method though high If level simulation find switching activity in circuit each functional unit exchange for binary sequence length and value bit are logic one value. To use the switching activity find the allocation with minimal power consumption, the proposed method visits all control steps one by one and determines the allocation with minimal power consumption at each control step. As the existing method, the execution time can be fast according to use the number of operator and max control step. And it is the reduction effect from 6% to 8%.

  • PDF