• Journal of Korea Society of Digital Industry and Information Management
• /
• v.9 no.1
• /
• pp.151-163
• /
• 2013

Recently the attention on digital hologram that is regarded as to be the final goal of the 3-dimensional video technology has been increased. Digital hologram is calculated by modeling the interference phenomenon between an object wave and a reference wave. The modeling for digital holograms is called by computer generated hologram (CGH) Generally, CGH requires a very large amount of calculation. So if holograms are generated in real time, high-speed method should be needed. In this paper, we analyzed CGH equation, optimized it for mapping general purpose graphic processing unit (GPGPU), and proposed a optimized CGH calculation technique for GPGPU by resource allocation and various experiments which include block size changing, memory selection, and hologram tiling. The implemented results showed that a digital hologram that has $1,024{\times}1,024$ resolution can be generated during approximately 24ms, using 1K point clouds. In the experiment, we used two GTX 580 GPGPU of nVidia Inc.

• Journal of Korea Multimedia Society
• /
• v.18 no.1
• /
• pp.35-41
• /
• 2015

SDN(Software Defined Networking) has been considered as a new future computer network architecture and DDoS(Distributed Denial of Service) is the biggest threat in the network security. In SDN architecture, we present the technique to defend the DDoS SYN Flooding attack that is one of the DDoS attack method. First, we monitor the Backlog queue in order to reduce the unnecessary monitoring resources. If the Backlog queue of the certain server is occupied over 70%, the sFlow performs packet sampling with the server address as the destination address. To distinguish between the attacker and the normal user, we use the source address. We decide the SYN packet threshold using the remaining Backlog queue that possible to allow the number of connections. If certain sources address send the SYN packet over the threshold, we judge that this address is attacker. The controller will modify the flow table entry to block attack traffics. By using this method, we reduce the resource consumption about the unnecessary monitoring and the protection range is expanded to all switches. The result achieved from our experiment show that we can prevent the SYN Flooding attack before the Backlog queue is fully occupied.

• Computers and Concrete
• /
• v.22 no.6
• /
• pp.563-572
• /
• 2018

Uniaxial compressive strength test and uniaxial compression creep one were produced on four groups of twelve concrete specimens with different hole number by RLW-2000 rock triaxial rheology test system. The relationships between horizontal holes and instantaneous failure stress, the strain, and creep failure stress, the strain, and the relationships between stress level and instantaneous strain, creep strain were studied, and the relationship between horizontal holes and failure mode was determined. The results showed that: with horizontal hole number increasing, compressive strength of the specimens decreased whereas its peak strain increased, while both creep failure strength and its peak strain decreased. The relationships between horizontal holes and compressive strength of the specimens, the peak strain, were represented in quadratic polynomial, the relationships between horizontal holes and creep failure strength, the peak strain were represented in both linear and quadratic polynomial, respectively. Instantaneous strain decreased with stress level increasing, and the more holes in the blocks the less the damping of instantaneous strain were recorded. In the failure stress level, instantaneous strain reversally increased, creep strain showed three stages: decreasing, increasing, and sharp increasing; in same stress level, the less holes the less creep strain rate was recorded. The compressive-shear failure was produced along specimen diagonal line where the master surface of creep failure occurred, the more holes in a block, the higher chances of specimen failure and the more obvious master surface were.

• Journal of IKEEE
• /
• v.23 no.3
• /
• pp.925-933
• /
• 2019

In this paper, we implement ZYNQ SoC-based post-processing system that utilizes partial reconfiguration to remove blocking artifacts generated by compression algorithm. Hardware implementation of the deblocking filter in a Field Programmable Gate Array (FPGA) provides high computational capability and can be partially reconfigured to process 1080p images in real time. Partially reconfigurable areas in FPGA can be utilized to use hardware more efficiently in highly resource-constrained embedded systems. Experimental results of the proposed system show improvement of visual quality both objectively and subjectively with 0.6dB higher PSNR after deblocking filtering process. The measured power consumption of the deblocking filter during run-time is 68.33mW.

• Journal of the Korean Wood Science and Technology
• /
• v.52 no.4
• /
• pp.301-318
• /
• 2024

Contrary to other materials like metals, glass, etc., wood continuously interacts with the environment, increasing and decreasing its moisture content according to the humidity of the air and changing its dimensions by swelling or shrinking. Water diffusion through laminated solid wood is crucial in wood bonding processes. The adhesive layer might block the diffusion if the water vapor diffusion is perpendicular to the bond line. As a result of this blockage, different proportions of deformation appear on the two sides of the bond line, which causes stresses in the bonded assembly. The question arises of how long the bonded structure will keep its integrity due to moisture diffusion blockage, inevitable tensions appearing in the glue line, and how these stresses could be avoided. With cross laminated timber (CLT) solid wood panel production, this question gains new importance. Despite the relevance, only a limited number of publications are available. Comprehensive research would also be necessary considering both the molecular structure and diffusion properties of the adhesive adjusted to the wood species (covering possible substituting wood species, too). Overall, this review serves as a resource for enhancing our understanding of water vapor diffusion through wood adhesive layers and provides insights that have implications for reducing stresses in bonded wood assemblies and the performance of the bonded group over time. Furthermore, identifying knowledge gaps is necessary to establish the basis for investigating the diffusion property of CLT panels.

• Asian-Australasian Journal of Animal Sciences
• /
• v.12 no.5
• /
• pp.758-765
• /
• 1999

Comparative studies of the effects of rates and frequency of application of dairy slurry on herbage yield and stand persistence of alfalfa and various forage grasses have not previously been conducted. The results being reported here are part of a larger study having a primary objective of comparing the effectiveness of alfalfa (Medicago sativa L.), various grasses and alfalfa-grass mixtures for utilizing nutrients from applied dairy slurry. The objectives of this part of the study were to evaluate the effects of various rates and frequencies of application of slurry on herbage yield and stand persistence of orchardgrass (Dactylis glomerata L.), reed canarygrass (Phalaris arundinacea L.), and alfalfa-orchanrdgreass and alfalfa-reed canarygrass mixtures managed as a 4-cutting management system. A randomized complete block design with treatments in a split plot arrangement with four replicates was used. The main plots consisted of 9 fertility treatments: 7 slurry rate and time of application treatments, one inorganic fertilizer treatment, and an unfertilized control. The sub-plots consisted of the two grasses and two alfalfa-grass mixture mentioned above. Slurry was composed from stored solids scraped from the alleyways of a free-stall housing barn and water added to form a slurry having about 8% solids. Manure was pumped from a liquid spreader tank into 10.4 L garden water cans for manual application to the plots. Herbage yields within species were generally unaffected by various rates of application in the first production year. Herbage yields of grasses and alfalfa-grass mixtures the second year were generally not affected by frequency of application for the same rate of slurry applied. Slurry application resulted in greater herbage yield increases in grasses than alfalfa-grass mixtures in the 4-cutting management system. In general, herbage dry matter yields of grasses from the dairy slurry treatments equaled or exceeded yields from the inorganic fertilizer treatment. Stand ratings of grasses and alfalfa-grass mixtures were not changed by manure application rates. In this study, the highest rate of slurry ($967kg\;total\;N\;ha^{-1}$ in 1995 plus $2,014kg\;N\;ha^{-1}$ in 1996) was not detrimental to herbage yields or stand persistence of any of the species. It was concluded that applying dairy slurry to these cool-season grasses and alfalfa-grass mixtures managed in a 4-cutting system is an acceptable practice from the standpoint of herbage yield and satnd persistence and by doing so the utilization of inorganic fertilizers can be reduced.

• Asian-Australasian Journal of Animal Sciences
• /
• v.12 no.5
• /
• pp.766-771
• /
• 1999

The first paper of this series compared the effects of rates and frequencies of application of dairy slurry on herbage yields and stand persistence of orchardgrass (Dactylis glomerata L.), reed canarygrass (Phalaris arundinacea L.), and alfalfa (Medicago sativa L.)-grass mixtures managed as a 4-cutting system. This paper compares the effects of rates and frequencies of application of dairy slurry on herbage yield and stand persistence of alfalfa, orchardgrass, tall fescue (Festuca arundinacea Schreb.), and alfalfa-orchardgrass mixture managed as a 5-cutting system. The results presented here are part of a larger study having a primary objective of comparing alfalfa, various grasses, and alfalfa-grass mixtures for utilizing nutrients from dairy slurry applied to established stands. A randomized complete block design with treatments in a split plot arrangement with four replicates was used. The main plots consisted of 9 fertility treatments: 7 slurry rate and frequency of application treatments, one inorganic fertilizer treatment, and an unfertilized control. The sub-plots were the forage species. Manure used for the study was composed from stored solids scraped from the alleyways of a free-stall dairy barn. Water was added to from a slurry having about 8 % solids. Slurry was pumped from the liquid spreader tank into 10.4 L garden watering cans for manual application to the plots. Herbage yields of alfalfa, tall fescue, and alfalfa-orchardgrass were generally not affected by slurry application rates and were not significantly different from the inorganic fertilizer treatment. Tall fescue significantly outyielded all other forage species at all manure and the inorganic fertilizer treatments in the second year when rainfall during the growing season was unusually high. Grasses generally had a greater response to manure applications than alfalfa and alfalfa-orchardgrass. Increasing rates of manure did not increase herbage yields of alfalfa and alfalfa-orchardgrass. Herbage yields within each species were not affected by frequency of application of the same total rate. Stand ratings of alfalfa, orcahrdgrass and alfalfa-orchardgrass were significantly lower for the very high manure application rate compared to the control treatment. Based upon the results of this study, multiple annual applications of slurry manure can be made onto these species at rates up to $1,700kg\;total\;N\;ha^{-1}\;yr^{-1}$ without detrimental effects on herbage yield and stand persistence.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.11
• /
• pp.1616-1620
• /
• 2001

Two feeding trials were conducted to study the effects of different chelated copper and zinc compounds on the performance and fecal excretions of weanling pigs. In Exp. 1, 150 weanling pigs ($L{\times}Y{\times}D$, $12.30{\pm}2.07kg$) were randomly assigned to five dietary treatments: 170 ppm Cu from $CuSO_4$, 85 ppm Cu from Cu amino-chelate (CAC), 170 ppm Cu from CAC, 85 ppm Cu from Cu-Lysine (CL), and 170 ppm Cu from CL. In Exp. 2, 150 weanling pigs ($L{\times}Y{\times}D$, $12.52{\pm}1.80kg$) were randomly assigned to five dietary treatments: 120 ppm Zn from $ZnSO_4$, 60 ppm Zn from Zn-amino-chelate (ZAC), 120 ppm Zn from ZAC, 60 ppm Zn from Zn-Methionine (ZM), and 120 ppm Zn from ZM. In both experiments, pigs were randomly distributed to the treatments following a randomized complete block design on the basis of body weight as the blocking variable. Each experiment was conducted for 28 days. Blood and fecal samples were collected to determine mineral contents as affected by the dietary treatments. There was no difference (p>0.05) in ADG and ADFI among treatments, but F/G was improved (p<0.05) in pigs fed diet with 170 ppm CAC than 85 ppm CL but not different (p>0.05) to the control (170 ppm $CuSO_4$). Regardless of copper source, concentration of Cu in serum and feces were higher in pigs fed diet with 170 ppm Cu than pigs fed diet with 85 ppm Cu (Exp 1). In Exp 2 the ADG was higher (p<0.05) in pigs fed diet with 120 ppm ZM than in pigs fed diets with 120 ppm $ZnSO_4$ and 60 ppm ZAC and ZM. The serum zinc concentration was generally higher (p<0.05) in pigs fed diet with organic source than the control group ($ZnSO_4$). Also, there was a trend towards a decrease in fecal excretions of zinc when dietary zinc level was low. The efficacy of the two chelated copper and zinc sources is similar in terms of growth performance. The fecal excretions for Cu and Zn could be reduced in pigs fed low level of these minerals using organic sources.

• Journal of Animal Science and Technology
• /
• v.48 no.3
• /
• pp.375-382
• /
• 2006

This study was conducted to investigate the effects of dietary herbal plant mixture on growth performance, blood immunological parameters, fecal VFA and NH3-N concentrations in growing pigs. The dietary treatments were 1) NC (negative control; antibiotics-free diet), 2) PC (positive control; NC diet added 0.16% antibiotic), 3) NCK0.2 (NC diet added 0.2% herbal plant mixture (koppuul??)) and 4) PCK0.1 (PC diet added 0.1% herbal plant mixture (koppuul??)). Eighty crossbred (Landrace×Yorkshire×Duroc) pigs (16.35±0.05kg average initial body weight) were used for 42 days. The pigs were assigned to the treatments according to body weight and each treatment had 5 replicates of 4 pigs per pen in a randomized complete block design. During the whole experimental period, PCK0.1 and PC treatments had significantly higher ADG than NC treatment (P<0.05). Gain/feed of pigs fed PC diet was higher than that of pigs fed NC diet (P<0.05). For blood immunological parameters investigations, white blood cells (WBC) counts and IgG level increased in the pigs fed PC, NCK0.2 and PCK0.1 diets compared to pigs fed NC diet. In addition, higher (P<0.05) serum lymphocyte concentration was found in PCK0.1 treatment compared to NC treatment. NH3-N concentration in pigs fed NCK0.2% diet was lower than that in pigs fed PC and NC diets. There were no significant differences in DM and N digestibilities among the treatments. In conclusion, the results suggested that the dietary additions of herbal plant mixture or antibiotics increase ADG, the concentrations of WBC counts and IgG, lymphocyte, while decrease NH3-N concentration in feces.

• Food Science of Animal Resources
• /
• v.28 no.2
• /
• pp.181-186
• /
• 2008

This study was conducted to investigate the effects of supplementation with transgenic Bacillus subtilis secreting chitinase on the growth performance, nutrient digestibility, blood characteristics and carcass traits in finishing pigs. A total of sixty-four pigs ($50.82{\pm}0.82kg$, average initial body weight) were assessed over a period of 84 days. Dietary treatments included: 1) CON (basal diet without antibiotics), 2) AD (basal diet + 0.1% Virginiamycin), 3) CD0.5 (basal diet + 0.5% transgenic B. subtilis), 4) CD1.0 (basal diet + 1.0% transgenic B. subtilis). Each dietary treatment had 4 replicates of 4 pigs per pen in a randomized complete block design. In terms of growth performance, the ADG (average daily gain) and gain/feed ratio were significantly increased with the CD1.0 diet compared to the AD diet during weeks 0-4 (p<0.05). During weeks 4-8, the ADG was significantly increased with the AD diet compared to the CON and CD0.5 diets (p<0.05). The ADFI was also significantly increased with the AD diet compared to the other diets (p<0.05). During weeks $8{\sim}12$, the ADFI was significantly increased with the CON diet compared to the other diets (p<0.05), and the gain/feed ratio was significantly increased with the CD0.5 and CD1.0 diets compared to the AD diet (p<0.05). Over the entire 84 day test period, the ADFI was significantly increased with the AD diet compared to the CD0.5 and CD1.0 diets (p<0.05). The gain/feed ratio was significantly increased with the CD0.5 and CD1.0 diets compared to the CON diet (p<0.05). In terms of meat color, the L value was significantly increased with the CD0.5 diet compared to the CON and AD diets (p<0.05), and the a value was significantly increased with the CON diet compared to the other diets (p<0.05). In terms of sensory evaluation, meat color was significantly improved with the CON, CD0.5 and CD1.0 diets compared to the AD diet (p<0.05). Marbling was significantly increased with the CON diet compared to the other diets (p<0.05). Firmness was significantly increased with the CD0.5 diet compared to the AD diet (p<0.05). In conclusion, supplementation with transformed B. subtilis secreting chitinase improved gain/feed ratios and influenced meat color. Thus, we suggest that transformed B. subtilis secreting chitinase can partially substitute for antibiotics.