• Proceedings of the KIEE Conference
• /
• 1999.07d
• /
• pp.1922-1924
• /
• 1999

The purpose of this study is to establish the design theory of a DR ceramic bandpass filter used for basestations and to research on the design theory of bandpass filter. The design procedure is circuit parameters and structural parameters will be derived. It was observed that the filter characteristics at the simulations.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2001.11a
• /
• pp.202-206
• /
• 2001

In this paper a novel dielectric resonator (DR) bandpass filter (BPF) with flexible arrangement of attenuation poles is proposed. This DR filter is similar to a conventional DR filter except adding a microstrip line below a DR, which not only shifts the location of attenuation poles, but also improves skirt characteristics. The duplexer with the proposed DR BPF has been yielded better isolation and sharper skirt behavior than that with a conventional DR alter. The implemented duplexer has shown a good performance and been well agreed with the simulation.

• Journal of the Korean Institute of Navigation
• /
• v.22 no.2
• /
• pp.33-38
• /
• 1998

Approximate design formulse for bandpass filter using stepped microstrip lines are derived. The coupling length of which can be adjusted according to the factor K.Some advantages fo this filter, thus, are the abilities to control the size and shape by changing the structure of the resonator. Using the design formulas an experimental filter was designed and fabricated . The experimental results have been agree with the designed ones, and hence, the validity of the proposed method has been confirmed.

• 한국ITS학회:학술대회논문집
• /
• 2010.05a
• /
• pp.96-97
• /
• 2010

• Journal of electromagnetic engineering and science
• /
• v.10 no.1
• /
• pp.1-5
• /
• 2010

A spurious suppressed bandpass filter is proposed and discussed using the stepped impedance resonator(SIR) on a substrate-integrated waveguide(SIW) structure with a double-layer substrate. The second resonance of the fundamental $TE_{10}$ mode can be controlled by adjusting the electrical length and impedance ratio of each SIR. The spurious suppressed SIW bandpass filter shows the measurement results of the insertion loss of 3.98 dB and return loss of less than 11.58 dB at the center frequency of 12 GHz. Also, the second spurious frequency is improved to about $1.5f_0$ compared with $1.33f_0$.

• ETRI Journal
• /
• v.35 no.3
• /
• pp.538-541
• /
• 2013

A compact microstrip lowpass filter (LPF) with an elliptic function response is proposed. A high equivalent capacitance and inductance between the structures of the resonator result in the sharp transition band of 0.04 GHz from 4 GHz to 4.04 GHz with an attenuation level of -3 dB and -20 dB, respectively. To improve the LPF rejection band, multiple open stubs are connected to the proposed resonator. A filter with a 3-dB cut-off frequency at 4 GHz is designed, fabricated, and measured, and agreement between the measured and simulated results is achieved. The results show that a stopband bandwidth of 131% with a suppression level better than -20 dB is obtained while achieving a compact size with a wide stopband.

• ETRI Journal
• /
• v.36 no.1
• /
• pp.163-166
• /
• 2014

A microstrip dual-wideband bandpass filter using a multimode resonator (MMR) is proposed in this letter. The proposed MMR loaded with a T-shaped open-ended stub and a short-ended stub exhibits triple mode characteristics, and a synthesis method is developed to illustrate the wide passband with independently controllable center frequencies and bandwidths. To verify this design methodology, a dual-wideband filter with fractional bandwidths of 19.1% and 27.9% is designed and fabricated. The measured results agree with the simulations.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.416-420
• /
• 2002

This Paper describes a matched-filter type strain sensor system using optical fiber Bragg grating (FBG) sensor. Matched-filter type uses another wavelength-matched FBG filter to track wavelength shift in the FBG sensor. Filter FBG is attached on a fiber stretcher and stretched by PZT actuator. To overcome the nonlinearity and hysteresis of the PZT actuator that degrades system accuracy, a string resonator which can measure an absolute strain is employed. And the effect of vibration modes on string resonator is investigated particularly regarding its sensitivity and stability.

• Journal of electromagnetic engineering and science
• /
• v.11 no.2
• /
• pp.91-96
• /
• 2011

In this paper, we propose a microstrip bandpass filter using stepped-impedance coupled-line hairpin resonators. The stepped-impedance coupled-line hairpin resonator has extended harmonic suppression in comparison with a conventional hairpin resonator due to transmission zero and the movement of harmonic frequencies resulting from the stepped-impedance characteristic. A high-pass type impedance/admittance inverter is employed in order to improve the lower frequency skirt characteristics of the passband. A 4-pole bandpass filter is designed and fabricated at 1.8 GHz. The measured results show the excellent attenuation performance at the stopband which is greater than 30 dB up to 10 GHz.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.54 no.2
• /
• pp.91-96
• /
• 2005

In this letter, we proposed a novel DGS (Defected Ground Structure) microstrip resonator. The proposed DGS resonator has the resonant and anti-resonant characteristic that is very similar to those of a SAW resonator or a FBAR. In order to confirm the validity of the proposed resonator, we designed and implemented bandpass fitters by using series ana parallel resonators.