• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 전력전자학술대회 논문집
• /
• pp.58-62
• /
• 1998

In the industrial motor drive systems, a torsional vibration is often generated because of the elastic elements in torque transmission. One of general methods for the system is H$\infty$ controller to suppress the torsional vibration and reject the torque disturbance. vibration and reject the torque disturbance. Moreover, the two-degrees-of-freedom controller, which includes the H$\infty$ controller, is designed in order to improve the command following property. In this paper, we propose a new H$\infty$ controller with partial state feedback. This method having simple structure satisfies with the fast command following property and the attenuation of disturbances and vibrations simultaneously, just like the complicated TDOF H$\infty$ controller

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
• /
• pp.224-225
• /
• 2005

The microstrip patch antenna with PVDF (poly vinylidene fluoride) substrate, were experimentally studied at frequency 6 GHz. During the design of the essential elements of microstrip antenna, EM simulation tool Ensemble V 7.0 is used. We observed the resonant frequency by DC appled electric field in a microstrip patch antenna. This research has been made as an electronically tunable microstrip antenna, taking advantage of the voltage control dielectric substrate and piezoelectric properties substrate. We discuss the effect of substrates, electric field and piezoelectric phenomena in the PVDF microstrip antenna. The antenna frequency can be changed by varying the applied dc voltage. In this paper, we propose, a new technique to agile frequency of the microstrip antenna by using the PVDF piezoelectric substrate.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.361-361
• /
• 2000

In the 2-mass system with flexible shaft, a torsional vibration is often generated because of the elastic elements in torque transmission as the newly required speed response which is very close to the primary resonant frequency. This vibration makes it difficult to achieve quick responses of speed and disturbance rejection. In this paper, 2-mass system is designed by using pole placement based on optimal control theory fur fast speed response and torsional vibration elimination and using neural network for disturbance rejection in particular. The simulation results show that the proposed controller based on neural network and full state feedback controller has better performance than 려ll state feedback controller, especially fur disturbance rejection.

• Progress in Superconductivity
• /
• 제3권2호
• /
• pp.178-182
• /
• 2002

Superconducting four-element patch array antenna was designed and fabricated using $high-T_{c}$ superconducting (HTS) thin film. The array antenna has single-feed circularly polarization and a resonance frequency of 11.85 GHz fur satellite communication system. To fabricate this antenna $YBa_2$$Cu_3$$O_{7-x}$(YBCO) superconducting thin films were deposited using rf-magnetron sputtering technique. Sequential rotation technique based on radiation elements($0^{\circ}$ , $90^{\circ}$, 1$80^{\circ}$, $270^{\circ}$ phase delay) was utilized to achieve circularly polarization. Simulated and measured results, the analysis on resonant frequency(fr), return loss, and bandwidth are presented. The results show that 10 dB return loss bandwidth of the array antenna is 11.04 GHz~12.59 GHz (13.15%) and 3dB axial ratio bandwidth is 11.42~12.52 GHz (9.2%).).).

• Advanced Composite Materials
• /
• 제17권3호
• /
• pp.215-224
• /
• 2008

The present study aims to design a multilayer microstrip antenna with composite sandwich construction and investigate fatigue behavior of this multilayer SAS (surface antenna structure) that was asymmetric sandwich structure for the next generation of structural surface technology. This term, SAS, indicates that the structural surface becomes an antenna. Constituent materials were selected considering electrical properties, dielectric constant and tangent loss as well as mechanical properties. For the antenna performance, antenna elements inserted into structural layers were designed for satellite communication at a resonant frequency of 12.2 GHz. From electrical measurements, it was shown that antenna performances were in good agreement with design requirements. In cyclic 4-point bending, flexure behavior was investigated by static and fatigue test. Fatigue life curve of the SAS was obtained. The experimental results of bending fatigue were compared with single load level fatigue life prediction equations and in good agreement. The SAS concept is can be extended to give a useful guide for manufacturers of structural body panels as well as antenna designers.

• Journal of electromagnetic engineering and science
• /
• 제1권1호
• /
• pp.37-42
• /
• 2001

This paper presents the basic characteristics of a cutoff cavity-hacked slot antenna, for the application of spacetenna, with a feed post and a parasitic post inserted parallel to the slot. This type of antenna might effectively excite the slot and forcibly resonate the cavity by adding external reactance to the parasitic post. The Galerkin\`s method of moments is used to analyze integral equations for the unknown electric current on each post and electric field in the slot. The value of external reactance for forced resonance is discussed by deriving a determining equation, the current distribution on each post and the radiation patterns are considered. The analysis is in excellent agreement with the experiment for the radiation patterns.

• Journal of Power Electronics
• /
• 제11권6호
• /
• pp.787-792
• /
• 2011

In this paper, a new three phase soft switching inverter is presented. All of the semiconductor elements of this converter are soft switched. Employing only two auxiliary switches as DC-link switches and a simple control circuit are the advantages of the proposed inverter. The analytical equations and operating modes of the presented inverter are explained in details. The design considerations are presented and the experimental results verify the theoretical analysis.

• The Journal of the Acoustical Society of Korea
• /
• 제26권1E호
• /
• pp.14-20
• /
• 2007

The characteristics of a PZT transducer with a cylindrical rear surface were investigated theoretically and experimentally. The transducer was assumed as a set of finite rectangular ceramic elements for applying the staircase model to the theoretical analysis and the KLM equivalent circuit model was modified for analyzing its electric impedance and pulse-echo response. All results were compared with those of a conventional plane transducer which has a constant thickness of average value for the cylindrical arc. It was noted that the transducer with a cylindrical rear surface has several subsidiary resonant frequencies which are able to widen bandwidth.

• Journal of Electrical Engineering and Technology
• /
• 제9권4호
• /
• pp.1360-1364
• /
• 2014

In this paper, RCS characteristics on defect pattern of crossed dipole slot FSS having a finite size have been analyzed. To analyze RCS, we applied the electric field integral equation analysis which applies BiCGSTab algorithm with iterative method and uses RWG basis function. To verify the validity of this paper, RCS of PEC sphere has been compared to the theoretical results and FSSs with defect patterns are fabricated and measured. As defect patterns in FSS, missing one column, missing some elements, and discontinuity in surfaces are simulated and compared with the measurement results. Resonant frequency shifts in pass band and changes in bandwidth are observed. From the results, precisely predicting and designing frequency characteristics over defect patterns are essential when applying FSS structures such as FSS radomes.

• 한국안전학회지
• /
• 제10권2호
• /
• pp.32-38
• /
• 1995

The silencers are used to attenuate noise generated by the exhaust fan for industrial processes. The types of silencers applied in this study are absorptive duct silencer, expansion chamber, absorptive chamber and resonator. This study was carried out to verify the attenuation by the various silencers and elements. As a result, the difference of attenuation between the calculation and the measurement was about 1-7㏈. The attenuation by absorptive duct silencer and absorptive chamber was negligible at frequencies below 250Hz. The expansion chamber should be used for low frequency applications where the absorptive duct silencer was Ineffective. The attenuation by resonator may be realised when the ratio of frequency to resonant frequency approaches 1.