• Transactions on Electrical and Electronic Materials
• /
• v.5 no.2
• /
• pp.61-65
• /
• 2004

Bolt-tightened Langevin type vibrators using longitudinal mode of bar were designed and fabricated. In order to amplify the displacement of the tip of the vibrators, stacked ceramics were used and five different shapes of the horns were designed and jointed. Resonant frequencies and vibration characteristics of vibrators and horns were analyzed by ANSYS(finite element analysis computer program), and the displacements of tips of the horns were measured. As results, when the numbers of the stacked ceramics were increased, the displacements of the tips were increased and the driving voltages were decreased. Step l horn (BLT-St1) showed maximum displacement of 36.92 $\mu\textrm{m}$ at 36.7 ㎑ with 45 V$\sub$rms/ and 0.11 A. The displacement amplification ratio was about 5.2. But, the stress of step l horn was concentrated on intersection, where two diameters meet. To lessen the stress, step3 shaped hem is recommended.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.6 no.1
• /
• pp.7-11
• /
• 2002

By focusing on the resonant vibration mode of soil-underground structure system, this paper obtained dynamic soil stiffness and easy sliding conditions at the interface between soil and underground structure. Multi-step method is employed to isolate two primary causes of soil-structure interaction. Mohr-Coulomb criterion is used to determine the threshold level of the sliding. To find out the conditions the interface slides easily, parametric studies are performed about the factors governing sliding, which are the size and location of underground structures, ground condition, the configuration of surface deposit and interface friction coefficients.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1996.06a
• /
• pp.9-12
• /
• 1996

This paper introduces an analysis of the non-axisymmetric mode due to in-plane vibration of an annular type piezoelectric actuator using FEM(Finite Element Method). The actuator is used as stator of ultrasonec motor. The freqrency charecterisrics and non-axisymmetric mode of the annular piezoelectric acruator are considered at a steady-state condition. The non-axisymmetric mode is occured by two sinusodial voltage sources with $\pi$/2 phase difference on the time domain. The resonant frequency of non-axisymmetric of non-axisymmetric mode is 60.358 kHz and 59.880 kHz for calculation and measurement, respectivly. The error was 0.8% between calculation and measurement. The revolution of the non-axisymmetric mode for actuator is analized at a period of exciting voltage sources using annimation. It is confirmed that the actuator has an usefulness as the stator of ultrasonic motor and the preposed method has a properity.

• Current Optics and Photonics
• /
• v.1 no.4
• /
• pp.278-283
• /
• 2017

We theoretically study the dynamics of water tetramer in intense femtosecond laser pulses with different frequencies. The simulations are carried out by incorporating the molecular dynamics method non-adiabatically into the time-dependent local-density approximation (TDLDA-MD). Three typical scenarios of water tetramer including the normal vibration with enlarged OH bonds, free OH bonds breaking and the pure Coulomb explosion are presented by investigating the electronic and ionic dynamics. The result indicates that the ionization is enhanced and the corresponding fragmentation effect as well as the damping of the dipole moment are found more notably when increasing the laser frequency especially when the frequency falls in the resonant region of the absorption spectra. The study of the level depletion reveals that the ratio of the emission amount from different levels can be controlled by changing the laser frequency referring to the Keldysh parameter.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2007.04a
• /
• pp.99-104
• /
• 2007

In this paper a dynamic behavior(natural frequency) of a cracked cantilever beam with tip mass and follower force is presented. In addition. an analysis of the flutter and buckling instability of a cracked cantilever beam subjected to a follower compressive load is presented. Based on the Euler-Bernouli beam theory, the equation of motion can be constructed by using the Lagrange's equation. The vibration analysis on such cracked beam is conducted to identify the critical follower force for flutter ins stability based on the variation of the first two resonant frequencies of the beam. Besides. the effect of the crack's intensity and location on the flutter follower force is studied. The crack section is represented by a local flexibility matrix connecting two undamaged beam segments. The crack is assumed to be in the first mode of fracture and to be always opened during the vibrations.

• Proceedings of the KIEE Conference
• /
• 1994.07b
• /
• pp.1419-1421
• /
• 1994

The method of suppression based on the principle of energy trapping effect is very effective at high frequency. In this paper, We intended to get resonant frequency and bandpass filer characteristics in appling to vibration mode of PZT-4 and PZT-8 using trapped energy phenomenon. First, we theoretically analyzed a piezoelectric ceramic filter characteristics changing the thickness of ceramic plate, electrode spacing and distance between the two pairs of electrodes. We also experimentally investigated characteristics of ceramic filter made.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.630-633
• /
• 1999

This paper presents a new sort of multilayer piezoelectric ceramice transformer for switching regulatied power supplies. And this paper presents the study and development of a DC-DC converter with a transformer made from piezoelectric materials. This piezoelectric transformer operate, in the second thickness extensional vibration mode. Its resonant frequency is higher than 1MHz, This piezoelectric transformer was used the PbTiO$_3$ family ceramics because it was a material large anisotropy between electromechanical coupling factors k$_{t}$ and k$_{p}$. The input and output layer consists of two piezoelectric ceramic layer for eleivater of outpur power.wer.

• Structural Engineering and Mechanics
• /
• v.12 no.3
• /
• pp.267-281
• /
• 2001

Transient and quasi-steady-state vertical vibrations of a multi-span beam steel bridge located on a single-track railway line are considered, induced by a superfast passenger train, moving at speed 120-360 km/h. Matrix dynamic equations of motion of a simplified model of the system are formulated partly in the implicit form. A recurrent-iterative algorithm for solving these equations is presented. Excessive vibrations of the system in the resonant zones are reduced effectively with passive dynamic absorbers, tuned to the first mode of a single bridge span. The dynamic analysis has been performed for a series of types of bridges with span lengths of 10 to 30 m, and with parameters closed to multi-span beam railway bridges erected in the second half of the $20^{th}$ century.

• Coupled systems mechanics
• /
• v.1 no.3
• /
• pp.235-245
• /
• 2012

The nonlinear resonant response of an axially moving beam is investigated in this paper via two different numerical techniques: the pseudo-arclength continuation technique and direct time integration. In particular, the response is examined for the system in the neighborhood of a three-to-one internal resonance between the first two modes as well as for the case where it is not. The equation of motion is reduced into a set of nonlinear ordinary differential equation via the Galerkin technique. This set is solved using the pseudo-arclength continuation technique and the results are confirmed through use of direct time integration. Vibration characteristics of the system are presented in the form of frequency-response curves, time histories, phase-plane diagrams, and fast Fourier transforms (FFTs).

• The Journal of the Acoustical Society of Korea
• /
• v.26 no.1E
• /
• pp.14-20
• /
• 2007

The characteristics of a PZT transducer with a cylindrical rear surface were investigated theoretically and experimentally. The transducer was assumed as a set of finite rectangular ceramic elements for applying the staircase model to the theoretical analysis and the KLM equivalent circuit model was modified for analyzing its electric impedance and pulse-echo response. All results were compared with those of a conventional plane transducer which has a constant thickness of average value for the cylindrical arc. It was noted that the transducer with a cylindrical rear surface has several subsidiary resonant frequencies which are able to widen bandwidth.