• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제52권12호
• /
• pp.595-601
• /
• 2003

For a control of CPS(Contactless Power Supply), the paper deals with the results which are simulated by a equivalent electric circuit on the LIPT(Linear Inductive Power Transmission). In order to control the CPS, the output values is handled with the driving frequency according to the change of a load. The method that controls the driving frequency for adjusting the output power is reasonable to be applied to the controller. But, when the driving frequency meets the resonant frequency and passes, it lead to a serious problem. Therefore, the controlled region of the driving frequency has to be predicted and determined by the simulation of a electric circuit.

• Journal of electromagnetic engineering and science
• /
• 제13권4호
• /
• pp.263-266
• /
• 2013

A novel compact and low-loss VHF bandpass filter is presented with enhanced stopband performance using metamaterial zeroth order resonator (ZOR) characteristics. An in-line ZOR filter is initially suggested and changed to have transmission zeros (TZs) due to source-load coupling for effective improvement of the isolation from UHF wireless channels. The proposed filter is smaller than 1/10 of the conventional filters in terms of size and has relatively very low insertion loss (< 1 dB for the electromagnetic (EM) simulation and < 3 dB for the measurement) and return loss (<-20 dB) in the passband due to the approximately 80% size reduction and the higher isolation in the stopband due to the TZs. The circuit and EM simulation are in good agreement with the measurements.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 추계학술대회 논문집 전력기술부문
• /
• pp.249-251
• /
• 2004

Harmonic resonant overvoltage during restoration of primary restorative transmission system originates in switching operations and nonlinear characteristics of equipments. Actually it is difficult to predict the occurrence of harmonic overvoltage, since they result from nonlinear characteristics of transformers and other equipments. This paper describes the analysis of domestic primary restorative transmission system using PSCAD/EMTDC. The harmonic resonance is verified and showed the relation with equipments which have nonlinear characteristics such as generator and transformer in this paper. And the solution to prevent harmonic resonance is proposed too. As a result, the PSCAD/EMTDC simulation showed slightly conflictive results that had been presented by IEEE Power System Restoration Working Group report.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.541-544
• /
• 2005

In this paper, admittance is introduced to represent electro-mechanical characteristics of piezoelectric structures and to predict the performance of piezoelectric shunt system. Finite element method is used to obtain numerical admittance. In order to illuminate the effect of noise reduction in the shunt system, two experimental setups were constructed. One is for matching the resonant shunt damping. The other is a standard test setup according to SAE J1400 used to measure the transmission loss for the smart panel with shunt circuit. Shunt performance and noise reduction of smart panel are realized by these two experiments.

• 한국산학기술학회논문지
• /
• 제17권5호
• /
• pp.67-73
• /
• 2016

최근 들어 전 세계적으로 무선전력전송이 많이 연구되고 있다. 무선 전력전송이란 전기기기가 전선이 없어도 무선으로 전력을 공급하는 기술이다. 본 논문에서는 ICT 기반의 무선전력전송 시스템을 설계, 제작하였다. 제안된 시스템은 기존 시스템보다 픽업코일에 접촉는 면적을 증대하여 같은 L값과 C값을 사용해도 효율이 높아질 수 있도록 설계하였다. 무선 전송의 송 수신부와 고효율의 코일부로 구성되어 있으며, 시스템의 전송 효율을 높이는 방법을 제안하였다. 특히 무선 송 수신부는 ICT 기술과 연동이 가능하도록 설계하여 실시간 원격 모니터링이 가능하도록 제작하였고, 대기전력을 절감하는 효과를 연구하였다. 이를 위하여 기업에서 무선전력전송 시스템에 사용된 IGBT소자의 최대 주파수 20[KHz]를 사용하여 이에 가장 적절한 L, C값을 찾기 위해 많은 필드실험을 통하여 가장 효율적인 L값 $23.9[{\mu}H]$, C값 $2.64[{\mu}F]$을 선정하여 시스템을 구성하였다. 또한 대기전력을 감소하기 위해 출력전류를 제어하는 알고리즘을 설계하여 적용하였다. 이 결과 기존의 장비보다 무선전력전송용량과 효율이 75[%]에서 80[%]로 전력전송 유효거리를 10[%] 증가하여 대기전력의 감소 및 유지보수 비용이 절감하였고, ICT 기술을 이용한 무선 송수신부 와 프로그램을 개발하여 사용자가 취득된 데이터로 시스템의 고장 검출을 쉽게 할 수 있게 하였다.

• 한국항행학회논문지
• /
• 제20권3호
• /
• pp.246-251
• /
• 2016

본 논문에서는 자기공진방식 무선전력전송 표준인 A4WP (alliance for wireless power) 주파수 6.78 MHz에서, 1 m 거리 무선전력전송 안테나를 최적화하고 이에 따른 시뮬레이션 및 측정 결과를 비교하였다. 전력전송 거리는 시스템 형태, 안테나의 크기, 공진기내 코일과 코일사이 간격인 피치(pitch) 등 다양한 요인에 따라 영향을 받으며, 전자계 시뮬레이션을 통해 이를 확인하였다. 시뮬레이션을 통해 고정된 거리에 대하여 최적화된 무선전력전송 안테나를 설계하였으며, 거리에 따른 전송손실인 ${\mid}S_{21}{\mid}$ 값을 계산하였다. 설계된 안테나를 제작하여 측정치를 시뮬레이션 값과 비교한 결과, 최대 1.3 m 거리에서 시뮬레이션은 전송손실 1.6dB 및 효율 69 %, 측정결과는 전송손실 1.5dB 및 효율 70 %를 나타내었다.

• Structural Engineering and Mechanics
• /
• 제21권1호
• /
• pp.53-66
• /
• 2005

When a large number of identical cylinders are placed in an array with equal separation distance, near-resonant phenomena may occur between cylinders at critical frequencies, and cause large wave forces on each element of the array. In this paper, 64 truncated circular cylinders arranged in 4 rows and 16 columns are considered to check occurrence of near-resonant phenomena and performance of theoretical predictions based on the potential flow. Experiments are conducted in head waves to measure the wave elevation along the longitudinal centerline of the model, and measured results are compared with numerical ones. Attention is focused on the spatial variation of the wave amplitude around the first near-trapped-mode frequency.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.341-342
• /
• 2008

A conductivity of soot at microwave frequency is presented using a novel technique for complex permittivity of materials. The method overcomes limitations of conventional methods which are cavity perturbation and transmission/reflection method. Resonant frequencies and Q factors are measured and simulated for the cylindrical cavity, and they are compared to each other. Similar material property of both real material and simulation material produce similar values of resonant frequency and Q factor. The complex permittivity of material can be determined by simulating the cavity to change material property until the simulation results are nearly the same as the measurement results. Cylindrical cavity has been realized for measurement at 880 MHz, and conductivity of soot is measured. A sample was made by depositing the soot on the glass. The proposed method shows that the conductivity of soot is 11 S/m.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.951-956
• /
• 2008

Development of a silencer to Reduce Noise of Cross Talking in Apartment & Stores and air conditioning to fan Composite silencer application a specific of resonant type and expansion type, design possibility at reduction frequency. This silencer test result develop reduce 20dB of specification frequency. Pressure loss 2mmAq. This silencer is special of brief structure and possibility disjoint and joint, simple installation and maintenance.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집B
• /
• pp.386-391
• /
• 2001

In this paper, the vibration characteristics of IHTS(Intermediate Heat Transfer System) piping system of LMR(Liquid Metal Reactor) conveying hot liquid sodium are investigated to eliminate the pipe supports for economic reasons. To do this, a 3-dimensional straight pipe element and a curved pipe element conveying fluid are formulated using the dynamic stiffness method of the wave approach and coded to be applied to any complex piping system. Using this method, the dynamic characteristics including the natural frequency, the frequency response functions, and the dynamic instability due to the pipe internal flow velocity are analyzed. As one of the design parameters, the vibration energy flow is also analyzed to investigate the disturbance transmission paths for the resonant excitation and the non-resonant excitations.