• 전력전자학회논문지
• /
• 제3권2호
• /
• pp.107-117
• /
• 1998

근래에 들어, 입력 교류전원에서 양질의 전력을 공급하기 위하여 역률 개선 회로에 대한 연구가 활발히 진행되고 있다. 그 중 QBSRR이라는 ZCS(Zero Current Switching) 공진형 역률 개선 회로가 최근에 소개되었는데, 본 논문에서는, QBSRR회로의 전력단에 대하여 간단하고 정확한 모델링을 이용하여 안정된 출력 전압과 빠른 동적특성을 얻기 위한 데드빗(Deadbeat) 제어기를 체계적으로 설계하였다. 또한, 전류 센서를 사용하지 않고 부하 저항값을 파악하기 위하여 부하 예측 기법(Load Estimation Method)을 유도하였다. 본 논문에서는 제안한 제어기를 이용하면, 역률개선 회로의 출력측에 나타나는 120Hz의 리플에도 불구하고 안정된 출력전압과 빠른 동적 특성을 얻을 수 있게 된다. 아울러, 과도 응답 상태에서도 입력측의 높은 역률이 유지되는 장점을 가지고 있다. 시뮬레이션과 실험을 통하여 본 논문에서는 제안한 제어기의 우수한 특성을 입증하였다.

• 전기학회논문지
• /
• 제65권9호
• /
• pp.1571-1576
• /
• 2016

A Tesla coil is an electrical resonant transformer circuit invented by Nikola Tesla in 1891. It is used to produce high-voltage, low-current, high frequency alternating-current electricity. Tesla coil can generate a long streamer with several million volts of electricity as a high voltage device. It is basically consists of a voltage transformer, high voltage capacitor, spark gap, primary coil, secondary coil and toroid. It is difficult to appear in the output size of the streamer is controlled by the spark gap. The general decision method of the length of streamer is to display the electric output in accordance with the design specifications in initial development plan. Design specifications and the electric output is determined by the application of facilities. In this paper the spark gap is replaced with periodic switching semiconductor device to control output voltage easily in order to apply overvoltage protective circuit due to a secondary coil and a performance test. In these days, their main use is for entertainment and educational displays of the museum, although small coils are still used as leak detectors for high vacuum systems.

• 전력전자학회논문지
• /
• 제10권5호
• /
• pp.518-525
• /
• 2005

제안된 회로는 하나의 보조스위치를 이용하여 주 스위치와 정류용 다이오드가 턴-온/턴-오프 시 동시에 영전압과 영전류 조건을 만족시킨다. 그리고 이 회로에 사용되는 주 스위치는 다수 캐리어 소자뿐만 아니라 소수 캐리어 반도체 소자까지 사용할 수 있는 장점을 가지고 모든 PWM 컨버터에 적용 가능하다. 그리고 제안된 보조 스위치와 공진회로가 주 전력 경로에 존재하지 않으므로 주 스위치와 다이오드에 더 이상의 전압/전류 스트레스가 없게 된다. 제안된 컨버터의 유효성을 이론적 분석과 실험을 통하여 입증하였다.

• Journal of Power Electronics
• /
• 제14권6호
• /
• pp.1166-1177
• /
• 2014

A new type of topology with medium-frequency-transformer (MFT) isolation for medium voltage wind power generation systems is proposed in this paper. This type of converter is a high density power conversion system, with high performance features suitable for next generation wind power systems in either on-shore or off-shore applications. The proposed topology employs single-phase cascaded multi-level AC-AC converters on the grid side and three phase matrix converters on the generator side, which are interfaced by medium frequency transformers. This avoids DC-Link electrolytic capacitors and/or resonant L-C components in the power flow path thereby improving the power density and system reliability. Several configurations are given to fit different applications. The modulation and control strategy has been detailed. As two important part of the whole system, a novel single phase AC-AC converter topology with its reliable six-step switching technique and a novel symmetrical 11-segment modulation strategy for two stage matrix converter (TSMC) is proposed at the special situation of medium frequency chopping. The validity of the proposed concept has been verified by simulation results and experiment waveforms from a scaled down laboratory prototype.

• Transactions on Electrical and Electronic Materials
• /
• 제17권2호
• /
• pp.79-85
• /
• 2016

In this study, we proposed a new single-stage small power MH lamp electronic ballast and power-factor correction circuit with improved circuit by the current of passive power factor correction. Main circuit integrates traditional DC/DC and DC/AC circuits into one-stage DC/AC inverter. Moreover, we described the working principle and control strategy of the new circuit; it's soft switching principle; and resonant element parameter design formula. An experimental prototype of HID lamp electronic ballast with output power of 70 W was built to verify the feasibility of the analysis and design. The simulation and experimental results proved that the power factor of this circuit could reach 94%, with efficiency of 90%. The input current harmonics conform to IEC 61000-3-2 standards and its cost is low. These superior performances of the new circuit indicate certain practical values.

• Journal of Power Electronics
• /
• 제10권1호
• /
• pp.85-90
• /
• 2010

In this paper the effects of a Static Synchronous Series Compensator, which is constructed with a 48-pulse inverter, on the power demand from the grid are studied. Extensive simulation studies were carried out in the MATLAB simulation environment to observe the compensation achieved by the SSSC and its effects on the line voltage, line current, phase angle and real/reactive power. The designed device is simulated in a power system which is comprised of a three phase power source, a transmission line, line inductance and load. The system parameters such as line voltage, line current, reactive power Q and real power P transmissions are observed both when the SSSC is connected to and disconnected from the power system. The motivation for modeling a SSSC from a multi-pulse inverter is to enhance the voltage waveform of the device and this is observed in the total harmonic distortion (THD) analysis performed at the end of the paper. According to the results, the power flow and phase angle can be controlled successfully by the new device through voltage injection. Finally a THD analysis is performed to see the harmonics content. The effect on the quality of the line voltage and current is acceptable according to international standards.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 C
• /
• pp.1703-1705
• /
• 2001

The pulsed Nd:YAG laser is used widely for materials processing and medical instrument etc. It is important to control the laser energy in those fields using a pulsed Nd:YAG laser. In this paper, constant-frequency current resonant half-bridge inverter and Cockcroft-Walton circuit are used to charge the energy storage capacitor variably. This laser power supply is designed and fabricated which has no high-voltage transformer, less switching losses, compact size and capability in varying the laser output power. Also, the output characteristics of this Nd:YAG laser system are investigated. The tested results are described.

• 한국전기전자재료학회논문지
• /
• 제21권8호
• /
• pp.719-726
• /
• 2008

In this paper, we designed driving IC for 500 V resonant half-bridge type power converter, In this single-ended level shifter, chip area and power dissipation was decreased by 50% and 23.5% each compared to the conventional dual-ended level shifter. Also, this newly designed circuit solved the biggest problem of conventional flip-flop type level shifter in which the power MOSFET were turned on simultaneously due to the large dv/dt noise. The proposed high side level shifter included switching noise protection circuit and schmmit trigger to minimize the effect of displacement current flowing through LDMOS of level shifter when power MOSFET is operating. The designing process was proved reasonable by conducting Spectre and PSpice simulation on this circuit using 1${\mu}m$ BCD process parameter.

• 대한전자공학회논문지TC
• /
• 제42권1호`
• /
• pp.105-110
• /
• 2005

본 논문에서는 T-Junction 스위치 구조를 이용하여 이중 대역 전압제어 발진기를 설계, 제작하였다. T-Junction 스위치는 이중 대역 공진을 얻기 위한 스위치로서 공진부에 적용된다. 설계한 공진기를 발진기의 능동부와 결합하여 이중 대역 전압제어 발진기를 만들었다. 상위 주파수 대역 5.715 GHz 에서 전압제어 발진기의 출력 전력은 -1.42 dBm, 위상잡음은 1 MHz offset에서 -94.37 dBc/Hz이고 하위 주파수 대역 2.236 GHz에서 출력 전력은 -2.09 dEm, 위상잡음은 1 MHz offset -104.78 dBc/Hz 이다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1488-1490
• /
• 2008

The gyroscope is the sensor for detecting the rotation in inertial reference frame and constitute the navigation system together an accelerometer. As the inertial reference equipment for attitude determination and control in the satellite, the mechanical gyroscope has been used but it bring the disturbance for mass unbalance so the disturbance give a bad influence to the observation satellite mission because the mechanical gyroscope has the rotation parts. During the launch, The mechanical gyroscope is weak in vibration, shock and has the defect of narrow operating temperature range so it need the special design in integration. Recently the low orbit observation satellite for seeking the high pointing accuracy of image camera payload accept the FOG(Fiber Optic Gyro) or RLG(Ring Laser Gyro) for the attitude determination and control. The Ring Laser Gyro makes use of the Sanac effect within a resonant ring cavity of a He-Ne laser and has more accuracy than the other gyros. It need the 1000V DC to create the He-Ne plasma in discharge tube. In this paper, the design process of the High Voltage Power Supply for RLG(Ring Laser Gyroscope) is described. The specification for High Voltage Power Supply(HVPS) is proposed. Also, The analysis of flyback converter topology is explained. The Design for the HVPS is composed of the inverter circuit, feedback control circuit, high frequency switching transformer design and voltage doubler circuit.