• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.883-888
• /
• 2002

This study describes the limit and application of the two-microphone impedance tube method to the sound transmission loss measurement of several sound isolation materials with different physical properties. For the sound isolation materials having small flexural rigidity, it is shown that the two-microphone impedance tube method is validated to practically measure the sound transmission loss. For the sound isolation materials having large flexural rigidity, on the other hand, it is found that the two-microphone impedance tube method is no longer valid to measure the sound transmission loss because the regions of resonance and mass law are moved into the higher frequencies. In addition, in order to accurately measure the sound transmission loss of sound isolation materials, their size should be decided based on the consideration of the effect of acoustic excitation on their vibration response.

• 연구논문집
• /
• 통권34호
• /
• pp.39-46
• /
• 2004

The compressors in the air conditioner have the role of the pressurization and circulation of the refrigerant. The hermetic reciprocating compressors driven by rotary motor have been used for the air conditioner. The linear compressor has very simple structure and enhancement in the efficiency in comparison to that of conventional reciprocating compressor. The linear compressors are widely used for the small cryogenic refrigerator (below 1 kW), such as the Stirling refrigerator and pulse tube refrigerator. In the cryogenic application, the pressure ratio of the linear compressor is below 1.5, but the linear compressor for the air conditioner should overcome the high pressure ratio and the large pressure difference between the each sides of the piston. The resonance characteristics of the linear compressor has the significant impacts on the power consumption. To minimize the power consumption, the linear compressor should be operated at the resonance point. In the resonance characteristics, the role of the mechanical and gas spring should be considered. In present study, the cycle of the analysis of the vapor compression refrigeration cycle with the different refrigerants (R134a, R4l0a, R600a) and the designs of the linear compressor are performed. The effects of the stiffness of the mechanical spring on the electromagnetic forces would be discussed. Finally, the results show the design specification of the linear compressor for the air conditioner.

• 한국추진공학회지
• /
• 제24권6호
• /
• pp.108-119
• /
• 2020

액체로켓엔진 연소기와 가스터빈에 사용되는 동압센서는 고온의 환경에서 작동되어야 하므로 보통 리세스 마운트로 체결된다. 리세스 마운트 방식은 고온의 연소가스로부터 센서를 보호할 수 있으나 튜브-캐비티 시스템에서 튜브 공진이 발생한다. 본 연구에서는 이를 줄이기 위해 ITP를 도입하였다. 과거 문헌에서 제안한 ITP 모델을 실험 결과와 검증하고 응답특성을 분석하였다. 이 모델을 이용하여 기하학적 형상과 물리량을 변화시켜 주파수 응답 분포를 변화시킴으로써 ITP를 설계하기 위한 가이드라인을 제안하였다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2005년도 학술발표회(2)
• /
• pp.1114-1115
• /
• 2005

• 한국소음진동공학회논문집
• /
• 제15권5호
• /
• pp.571-577
• /
• 2005

The acoustic absorption of multiple layer perforated panel systems is largely reduced at the anti-resonance frequency. In order to improve the acoustic absorption at the anti-resonance frequency, the sound absorbing materials are inserted between perforated panels. By the insertion of absorbing materials, it is found that the multiple layer perforated panel system has better acoustic absorption at the anti-resonance frequency and more broadband frequency. Besides, it is shown that the absorption coefficients from the transfer matrix method agree well with the values measured by the two-microphone impedance tube method for various combinations of perforated panels, airspaces or sound absorbing materials.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1998년도 학술발표대회 논문집 제17권 2호
• /
• pp.247-250
• /
• 1998

The scattering of plane ultrasonic waves by the nuclear fuel pin of liquid metal reactor in sodium is studied. According to the internal composition in the cladding tube, the fuel pin has three cross sections, i.e. helium gas plenum, sodium-filled section, and fuel insertion section. The scattering spectra for each section of the fuel pin are different. The circumnavigating ultrasonic waves of each section are analyzed by the resonance scattering method. The whispering gallery wave modes are generated in the sodium-filled plenum section and the fuel rod insertion section with a sodium-gap. The circumferential wave modes are propagated in the cladding tube of the helium gas plenum section. The annular gap between the cladding tube and metal uranium pellet rod affects the scattering spectra. The different propagation characteristics can be utilized for the nondestructive method of detecting the unbonded area and measuring the level of the sodium-filled section of the fuel pin.

• Journal of Advanced Marine Engineering and Technology
• /
• 제36권4호
• /
• pp.497-503
• /
• 2012

본 연구의 목적은 고온, 고압 환경에서 사용되는 열교환기의 전열관에서 발생되는 열팽창에 따른 열응력, 진동과 같은 기계적 특성을 개선시키고, 전열부 체적을 최소화시키는 관점에서 실험계획법을 이용하여 구불구불한 관 형상에 대하여 형상최적화를 수행하였다. S-관 형상에 대하여 부분별 용도를 제시하였고, 형상 최적화를 위해서 형상변수 및 범위를 정한 후, 유한요소해석을 수행하여 형상변수에 따른 구조적 특성을 평가하였고, 요인배치법을 이용하여 형상변수의 주효과를 분석한 후, 반응표면법(Response surface Methodology)을 이용하여 회귀방정식을 구하고, 최적화 툴을 이용하여 최적화를 수행하였다.

• 한국자기공명학회논문지
• /
• 제20권2호
• /
• pp.61-65
• /
• 2016

Undesirable convective flow in an NMR tube inhibits the accurate measurement of diffusion coefficients by NMR spectroscopy. To minimize the convection effects, various methods have been suggested, and it has been known that the use of sample rotation can be useful. However, it has not been clearly examined that the convection suppressing effect of the sample rotation under the different spinning speeds. In this study, the relation between convective flow and the sample rotation was investigated using PGSE NMR diffusion experiments to reveal the feasibility for controlling the convective flow in an NMR tube by sample rotation itself. The viscosity effect was also examined using solvents with four different viscosities, acetone-$d_6$ chloroform-d, pyridine-$d_5$, and $D_2O$. The sample rotation showed apparent convection suppressing effects at all temperature range for the low viscosity solvents, acetone-$d_6$ and chloroform-d, even at the faster than 5 Hz spinning rate. The similar patterns were also observed for pyridine-$d_5$ and $D_2O$, which have higher viscosity. This effect was observed even at high temperatures where convective flow arises conspicuously.

• 한국자동차공학회논문집
• /
• 제14권5호
• /
• pp.93-99
• /
• 2006

Flexible couplers are widely used for exhaust transmitted vibration reduction in vehicles. This paper describes an investigation into the acoustical characteristics of exhaust flexible coupler by the simulation and testing. Computational acoustic simulation is carrying out to investigate resonance frequency and transmission loss of decoupler using the boundary element method and transfer matrix approach. To confirm the acoustical simulation results of exhaust decoupler, we compare with measured experimental results by the test of transmission loss measurement system. In the comparison with simulation results and tests results, there is correctly fit the resonance frequency and the trend of transmission loss. Also, we show that the acoustical structure of decoupler is analogous to the expended tube or side branch resonator. The characteristics of exhaust decoupler have a marked increase in the acoustic attenuation at the specified frequency bend. Therefore the decoupler is applied to develop the exhaust system not only for the vibration isolator but also for the noise attenuator.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제23회 추계학술대회 논문집
• /
• pp.121-125
• /
• 2004

액체 연료 로켓의 연료 공급 라인을 모사한 시스템에 대해, PSD가 시스템의 응답에 미치는 영향을 살펴보았다. 주관의 유량 변화에 대한 주관 압력 변화의 비(시스템 응답)를 PSD 내의 기체 체적을 변화시키며 살펴보았다. PSD 내에 기체가 지을 경우, 시스템의 공진 주파수가 작아짐을 확인하였다. 그리고 기체의 체적이 클수록 시스템 공진 주파수가 작아졌으나, 그 변화는 그리 크지 않았다. 또한 PSD 내 기체량이 많은 경우, 주관 내 압력 및 유량 변화의 진폭이 많이 줄어듦을 확인할 수 있었다.