• 대한기계학회논문집A
• /
• 제30권5호
• /
• pp.576-584
• /
• 2006

The actuating performance test of plate-type piezoelectric composite actuators having different lay-up sequences was experimentally carried out at simply supported and fixed-free boundary conditions. The actuating displacement of manufactured plate-type piezoelectric composite actuator (PCA) was measured using a non-contact laser displacement measurement system. Our results revealed that the actuating displacement with increasing applied electric field at a drive frequency of 1Hz increased non-linearly at the simply supported boundary condition whereas it almost linearly increased at the fixed-free boundary condition. On the other hand, the actuating displacement of piezoelectric composite actuator depended on the applied electric field in a drive frequency range from 1Hz to 10Hz, but its behavior was different in higher drive frequencies beyond 15Hz due to the occurrence of resonance. On the basis of the above experimental results, the bending characteristics of PCAs revealed different behavior depending on applied electric fields, drive frequencies as well as boundary conditions. Therefore, by investigating drive frequencies together with applied electric fields, actuating performance can be easily controlled and PCAs which were fabricated for this study will be sufficiently applied to pumping devices.

• 한국임상수의학회지
• /
• 제23권2호
• /
• pp.91-95
• /
• 2006

사람에서, Chiari 1형 기형은 소뇌 탈출과 척수공동증이 특정인 발달성 장애이다. 이러한 사람의 Chiari 1형 기형과 유사한 질환이 cavalier King Charles spaniels에서 흔히 나타났다. 그러나, 이러한 Chiari 1형 유사 기형이 다른 종의 개에서 진단 보고된 증례가 거의 없는 실정이다. 이에 본 연구에서는 24 마리의 개에서 자기공명영상 장치를 이용하여 Chiari 1형 유사 기형으로 진단된 증례를 보고하고자 한다. 이 개들은 다양한 신경 증상과 다양한 정도의 소뇌 탈출, 척수공동증, 두개관내 거미막 낭종 또는 뇌수종의 병발 질환들을 나타내었다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2012년도 전력전자학술대회 논문집
• /
• pp.215-216
• /
• 2012

This paper proposes a modified converter topology from the existing loaded resonant converter and describe the development of 10kW(50~500V, 0~ 50A) DC/DC Converter using the proposed topology. The suggested converter, which revised the topology of the converter operating on the CCM(Continuous Conduction Mode) (above resonance), has the advantage of enhancing the efficiency of rated load operation by rapidly increasing the primary side resonant current and by improving the resonance current in a trapezoid shape. The proposed topology is described with analysis of operating mode and designed using PSpice simulation and the points on design to consider when implementing the topology are described. It is verified that the advantages of the proposed topology centered on rated load are effectively highlighted. Experimental results carried out at different condition and its results shows 98.5% efficiency at full load condition.

• 한국환경과학회지
• /
• 제27권1호
• /
• pp.11-25
• /
• 2018

Both the propagation velocity and the direction of atmospheric waves are important factors for analyzing and forecasting meteo-tsunami. In this study, a total of 14 events of meteo-tsunami over 11 years (2006-2016) are selected through analyzing sea-level data observed from tidal stations along the west coast of the Korean peninsula. The propagation velocity and direction are calculated by tracing the atmospheric disturbance of each meteo-tsunami event predicted by the WRF model. Then, the Froude number is calculated using the propagation velocity of atmospheric waves and oceanic long waves from bathymetry data. To derive the critical condition for the occurrence of meteo-tsunami, supervised learning using a logistic regression algorithm is conducted. It is concluded that the threshold distance of meteo-tsunami occurrence, from a propagation direction, can be calculated by the amplitude of air-pressure tendency and the resonance factor, which are found using the Froude number. According to the critical condition, the distance increases logarithmically with the ratio of the amplitude of air-pressure tendency and the square of the resonance factor, and meteo-tsunami do not occur when the ratio is less than 5.11 hPa/10 min.

• 한국산학기술학회논문지
• /
• 제12권7호
• /
• pp.3296-3301
• /
• 2011

배수성포장은 다양한 장점을 가지고 있어 점차 보편화되고 있는데, 주요 효과로는 수막현상 최소화, 빗물에 의한 미끄럼저항값을 일정하게 유지하고, 차량과 포장체 사이에서 발생하는 소음을 저감시켜준다. 도로소음 및 수막현상 감소효과에 대한 많은 연구가 수행되었다. 본 연구의 목적은 배수성 포장 표층의 역학적 특성(강도 및 탄성계수)을 평가하는 것이다. 시험에 사용된 시편은 선회다짐기를 이용하여 제작하였다. 배수성포장의 상부표층 및 하부표층용 시편을 실험에 이용하였다. 마샬안정도시험(KS F 2377), 자유단공진주시험(KS F 2730), 일축압축시험(KS F 2314), 슈미트햄머시험 등을 수행하였다. 일축압축강도 및 슈미트햄머를 이용한 강도값을 비교 분석하였다.

• 한국음향학회지
• /
• 제27권5호
• /
• pp.215-220
• /
• 2008

의료용 초음파 프로브나 압전복합재료 트랜스듀서 등에 있어서는 배열된 압전세라믹 요소간의 공간, 즉 kerf에 주로 폴리머계열의 물질을 충진하고 있다. 이 경우 압전 요소의 횡방향 진동모드의 경계조건이 바뀌어 실제 사용되는 종방향 진동모드의 공진 주파수에도 영향을 미치게 된다. 본 연구에서는 kerf충진 매질에 따른 공진주파수의 변화를 실험적으로 고찰하기 위하여 크기가 $14mm{\times}0.22mm{\times}0.44mm$인 PZT 압전요소의 선형배열에 의한 초음파 트랜스듀서를 제작하고, kerf충진 매질이 없는 경우와 특성이 다른 두 종류의 에폭시로 충진한 경우 각각에 대한 측정을 행하였다. 그 결과 kerf충진 매질에 따른 종방향 공진주파수의 천이 경향이 이론해석 결과와 유사함을 확인하였다.

• 한국도로학회논문집
• /
• 제9권2호
• /
• pp.89-99
• /
• 2007

복소수계수 $E^*$로 표현되는 아스팔트 콘크리트의 탄성계수는 아스팔트 포장설계에서 매우 중요한 입력변수다. 일반적으로 아스팔트 콘크리트의 탄성계수는 동탄성 계수시험 (Dynamic Modulus Test)을 사용하여 평가한다. 그러나 동탄성계수시험은 일상적인 시험법으로 적용하기에는 고가의 시험장비, 복잡한 시험장비, 많은 시험시간 등의 문제가 있다. 이에 반하여 충격공진시험(IR: Impact Resonance test)은 비파괴시험으로서 간편한 시험장치, 단순한 시험방법이며 반복성이 뛰어나다. 본 연구의 주요 목적은 충격하중의 타격위치 시편거치 방법 충격하중원의 특성, 신호획득 속도, 신호처리방법 등을 포함한 IR시험의 시험조건의 영향을 평가하는 것이다. 본 연구에서 적용한 모든 시험조건 범위에서 충격공진시험에서 측정된 결과의 변동은 ${\pm}2.7%$ 이내에 들었다.

• 플랜트 저널
• /
• 제4권3호
• /
• pp.54-59
• /
• 2008

The resonance of boiler is caused by exciting force in the gas path and it generates the vibration by the harmony of boiler's dimensional factor. According to trending toward the boiler of increasing capacity and a bigger size, it has a problem of the vibration at back-pass heating surfaces. We can predict such vibrations as comparison between vortex frequency and gas column's natural frequency. We can't rely on the method for the past decades because of changing parameters, such as an allowable error, gas temperature, gas velocity, Strouhal number. We can reduce the vibration to use the seasoning effect and change the operating condition in coal fired boiler but it's not essential solution. When the vibration occurred in the model boiler, we must measures the acoustic pressure and frequency of places for considering the means. So far, we confirmed the problem from field measures and theoretical analysis about the acoustic vibration of boiler. We installed anti-acoustic baffle in a existing boiler to change the acoustic natural frequency at the cavity, which results in reducing the acoustic vibration. The first, we prove that the acoustic resonance is caused by harmonizing vortex shedding frequency of tube heat surface with acoustic natural frequency of cavity in the range of 650~750 MW loads. The second, the acoustic resonance at the back-pass heating surface has the third order of acoustic natural frequency at the second economizer. We install five anti-acoustic baffles at the second economizer to reducing the resonance. We confirm considerably reducing the acoustic vibration of boiler during the commercial boiler.

• 한국실내디자인학회논문집
• /
• 제15권4호
• /
• pp.89-96
• /
• 2006

Magnetic Resonance Imaging (MRI) scanner is the device to draw an image of conditions and the spread of various tissue in the body. It is used by making the patient into rounded superconductor and using high frequency which cause resonances. It uses superconduction magnet and high frequency that is non-ionizing radiation so can acquire biochemical, physical, and functional information of tissue. It is also very useful because it can scan tomography from many different angles to diagnose disease of a nervous system, the heart, and a skeletal structure. It also has advantages of that there is no risk of radiation exposure and the ability of observation on organizations such as brains, livers and the spinal cord of people. Since these features, the rate of use has been increased accordingly more considerations of the security are required when it plans. The weight of devices and the cover problem of the strong magnetic field which is occurred by magnetic resonance at the time of diagnosis can cause very important structure problems and architectural condition. That also the recent tendency which needs stronger equipment means that planning of the MRI unit should generally aim at purposing of the proximity for the device maintenance and up-grade and of further expansion. However there are not enough studies and data on the magnet resonance imaging in domestic hospitals. According to these reasons, this study has an object of indicating basic data on MRI unit plan standard and alternative proposals.

• 대한치과보철학회지
• /
• 제45권3호
• /
• pp.339-344
• /
• 2007

Statement of problem. Various anodic oxidation techniques can be applied to dental implant surfaces. But the condition for optimal anodized surfaces has not been described yet. Purpose. The purpose of this investigation was to compare an implant that was oxidized by another method with $TiUnite^{TM}$ through resonance frequency analysis and histomorphometry. Material and methods. Turned (control), $TiUnite^{TM}$ and another oxidized fixtures, which used $Ca^{2+}$ solution for anodic oxidation, were placed in the tibiae of 5 New Zealand White rabbits. The bone responses were evaluated and compared by consecutive resonance frequency analysis once a week for 6 weeks and histomorphometry after a healing period of 6 weeks. Results. At the first week, both oxidized implants showed significantly higher implant stability quotient (ISQ) values than the control. No significant differences in resonance frequency analysis were found between the two oxidized groups for 6 weeks. The means and standard deviations of bone-to-implant contact (BIC) ratios were $71.0{\pm}4.2$ for $TiUnite^{TM}$, $67.5{\pm}10.3$ for the $Ca^{2+}$-based oxidation fixture, $22.8{\pm}6.5$ for the control. Both oxidized implants were significantly superior in osseointegration to the turned one. There was, however, no statistically significant difference between the two oxidized implants. Conclusion. $TiUnite^{TM}$ and the $Ca^{2+}$-based oxidation fixture showed superior early bone response than the control with respect to resonance frequency analysis and histomorphometry. No significant differences between the oxidized groups, however, were found in this investigation using the rabbit tibia model.