• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11a
• /
• pp.398.1-398
• /
• 2002

A new type actuator has been designed and investigated to overcome thermal problems in slim optical disc drives adopted in mobile storage devices. As the size of optical disc drives decreases, it is more difficult to remove the heat inside a drive and the temperature of an actuator increases. As a result, the second resonance of an actuator moves down to a lower frequency band and the performance of optical parts also deteriorates. (omitted)

• Journal of KSNVE
• /
• v.10 no.4
• /
• pp.584-595
• /
• 2000

We design a new actuator for high density optical device in order to control the radial tilting motion. The newly designed actuator makes it possible to control the tilting motion actively, while the coventional actuator compress tilting motion with passive spring. First of all, We present 3-dimensional modeling of actuator and accomplish the modal analysis and magnetic analysis of actuator. Due to these results, a new designed actuator has performance of high sensitivity and high second resonance frequency. Secondly, We present the 3-DOF dynamic modeling of the 4-wire spring type actuator. sensitivity analysis is performed to consider the assembling error, such as the difference of mass center and force center. From these results, the sensitivities of rotation due to the assembly error are revealed and design criteria of rotation is presented. And experimental results of a newly designed actuator are presented and compared with theoretical results. Finally, We propose a dynamic tilt compensation and high acceleration actuator for high density optical storage devices.

• Journal of Magnetics
• /
• v.17 no.1
• /
• pp.61-67
• /
• 2012

The miniaturization of an electrostatic precipitator has become a key element in successfully constructing an efficient electrostatic precipitator because of the limited space allowed for installation in a subway tunnel. Therefore, the miniaturization of the rapping system of the electrostatic precipitator has also become important. This research proposes a resonant-type electromagnetic vibration exciter as a vibrating rapper for an electrostatic precipitator. The compact vibrating rapper removes collected dust from the collecting plates without direct impact on those collecting plates. To characterize the dynamic performance of the electromagnetic vibration exciter, finite element analysis was performed using a commercial electromagnetic analysis program, MAXEWLL. Moreover, we analyzed the resonant frequency of an electrostatic precipitator, to which the electromagnetic vibration exciter was applied, by ANSYS. Also, to measure the acceleration generated by the electromagnetic vibration exciter, we manufactured a prototype of the ESP and electromagnetic vibration exciter and measured its acceleration at the resonant frequency.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.11a
• /
• pp.15-20
• /
• 1996

We present the result of physical studies for three integral-type burnable absorbers of gadolinia, erbia and IFBA, in the hexagonal fuel assembly. The analysis of nuclear characteristics for gadolinia and IFBA cases shows that the spectrum hardening of hexagonal fuel assembly compared to rectangular one leads to smaller reactivity hold-down worth(RHW) and less change of MTC in the negative direction per insertion of one burnable absorber rod. Erbia case, on the other hand, exhibits reversed trend in RHW and MTC due to the enhanced absorption of large resonance of Erbium at 0.5 eV It turns out to be that Erbia performs best in terms of minimizing the peak pin power and maintaining as more negative MTC as practically attainable during the entire operational phase, and IFBA provides the least residual reactivity penalty at EOC. Therefore, we take Erbium as the suitable burnable absorber and provide optimal designs of 60, 120, 180, 240 and 300 erbia-shimmed hexagonal fuel assemblies with regard to minimizing the peak pin power.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.124-125
• /
• 2000

We introduce a scheme with a maximized efficiency of detecting atoms passing through an optical standing-wave mode cavity. Consider a standing-wave optical cavity illuminated by a weak probe beam through one of its mirrors where the transmission through the other mirror is monitored by a photodetector. If an atom is put in the cavity, the atom-cavity coupling shifts the resonance frequency of the system via the so-called normal mode splitting, and thereby the transmission power will drop. In fact, this type of atom detection scheme has been used in recent single atom trap experiments In practice, however, the field in a standing-wave mode will have a geometrical structure having nodes and antinodes that when the atom traverses the cavity through one of the nodes, there will be no such effect of atom-field interaction. (omitted)

• Current Optics and Photonics
• /
• v.1 no.3
• /
• pp.228-232
• /
• 2017

We propose a reflector-type perfect absorber with double absorption lines using electric and magnetic dipoles of Mie resonances in an array of silicon nanospheres on a silver substrate. In the visible range, hundreds of nanometer-sized nanospheres show strong absorption lines up to 99%, which are enhanced by the interference between Mie scattering and reflections from the silver substrate. The air gap distance between the silicon particles and silver substrate controls this interference, and the absorption wavelengths can be controlled by adjusting the diameter of the silicon particles over the entire range of visible wavelengths. Additionally, our structure has a filling factor of 0.322 when the absorbance is nearly 100%.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.1823-1828
• /
• 2000

Power transformers, air-intakes, stacks in a combined thermal power plant are the main noise sources. Power transformer noise among them has being get a target of public complaint due to 480Hz component of its pure tone. The source is mainly magnetostrictive vibration of the transformer core. The first countermeasures was installing sound barrier on the front of transformer. However, 500Hz, center of the frequency is not reduced. This paper includes the measurements of noise level at the near resident apartment, the identification of noise transfer and the countermeasures for noise sources. Cavity resonance type of noise reduction devices was installed on enclosuring wall of transformers. As a result, the noise level from transformer is reduced about 3dB.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.5
• /
• pp.425-429
• /
• 2007

A linear ultrasonic motor was designed by a combination of the longitudinal and bending mode. linear ultrasonic motors are based on an elliptical motion on the surface of elastic body, such as bar or plates. The corresponding eigen-mode of one resonance frequency can be excited twice at the same time with a phase shift of 90 degrees in space and time. That is excite symmetric and anti-symmetric modes. Then it determines the thrust and speed of the motor. Linear ultrasonic motors are investigated experimentally in according to be fabricated a general classification to motor structure and material characteristic. There was the first to simulate as use of finite element analysis ANSYS 9.0. The AL-T2W8-ARM14-LEG18-ANGLE80 motor has a maxim efficiency 18 % under the speed 0.14 m/s, thrust 345 gf and preload 280 gf, operating frequency is 57.6 kHz.

• Proceedings of the KSMRM Conference
• /
• 2003.10a
• /
• pp.33-33
• /
• 2003

목적： 확산텐서영상 획득시 확산경사자장의 방향수와 FA값, 그리고 FA값의 표준편차와의 상관관계를 조사해 보고자 하였다. 대상 및 방법： 3T MR scanner에서 정상성인 10명(남자 5명, 여자 5명)을 대상으로 걸어주는 확산강조 경사자장의 수(N = 6, 11, 23, 35, 47)를 증가시키며 확산텐서영상을 획득하였다. 획득된 영상들로부터 FA map을 만들고 주요 뇌구조물(frontal GM, putamen, posterior limb of internal capsule, thalamus 등)에 관심영역을 설정하여 FA값을 측정하였으며 그 FA값의 표준편차(sd) 를 계산하였다. 이때 사용한 펄스열은 Stejskal-Tanner type의 확산강조 경사자장이 포함된 single-shot SE EPI를 사용하였으며 영상획득시 사용한 피라미터는 다음과 같다. TR/TE=8000ms/71ms, Thickness/spacing=5/2mm, FOV=240mm, Matrix=$128{\times}128$, NEX= 1, b value=1000s/$\textrm{mm}^2$.

• Journal of Korean Neurosurgical Society
• /
• v.39 no.2
• /
• pp.136-140
• /
• 2006

The authors report three microcystic meningiomas with its characteristic immunohistochemical findings and chromosomal pattern. Three patients with surgically treated microcystic meningioma were studied for its radiological, histopathological findings, and chromosomal analysis was done in the one patient. Tumors were convexity meningioma in the frontal area. The tumors were enhanced homogenously in the two, and enhanced in homogenously with multiple small cysts in the other one on preoperative magenetic resonance image. Pathological examination showed marked nuclear pleomorphism, many small cysts, hyaline thickening in blood vessel wall, and mucinous background, compatable to microcystic type. EMA and vimentin were positive on the immunohistochemical stain. Chromosomal analysis showed tetrasomies of chromosome 5, 13, 17, and 20, and trisomies of chromosome 6, 7, 9, 11, 12, 16, 19, and 21, which are quite different from those of benign meningioma.