• 한국자기공명학회:학술대회논문집
• /
• 한국자기공명학회 1999년도 하계총회 및 제15회 자기공명 학술발표회
• /
• pp.27-27
• /
• 1999

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2008년도 하계학술대회 논문집
• /
• pp.164-166
• /
• 2008

Ultrasonic welder joins with a horn and a booster for amplification of the mechanical displacement. This coupling generates other resonance points at a frequency range lower than the piezoelectric material's resonance frequency. Therefore, frequency variation range through PLL control was proposed in order to prevent reaction to these resonance points.

• 한국안전학회지
• /
• 제32권2호
• /
• pp.85-91
• /
• 2017

When the shell-type roller gate is partly open, at a certain height the large vibration is caused due to resonance and the vibration can cause damage to the gate. In this study, the review on amplitude of vibration and the possible resonance occurring at the time of opening or closing of gate is performed. Throughout the natural frequency analysis, the installation location of the measuring instrument was selected. On opening or closing of gate, the measurement of gate vibration is performed. The natural frequencies according to the opening range of the gate is analyzed. As a result of measurement and analysis, we proposed ranges in which vibration occurs largely and resonance is predicted as an avoiding open ranges, or the safe opening or closing of the shell-type roller gate. The application of this paper's avoiding open range estimation method of shell-type roller gate can be utilized as the basic data for the systematic and rational maintenance management of dams and submerged weirs in the future, and it is expected that this study can bring forth.

• 한국자기공명학회논문지
• /
• 제8권2호
• /
• pp.108-114
• /
• 2004

Recently a new method for magnetic resonance imaging based on the detection of relatively strong signal from intermolecular multiple quantum coherences (iMQCs) is reported. Such a signal would not be observable in the conventional framework of magnetic resonance; it originates in long-range dipolar couplings that are traditionally ignored. In this paper, we present the results of experimental studies to assess the feasibility of intermolecular double quantum coherences (iDQCs) imaging in humans. We show that the iDQC images are readily observable at 4T and that they do indeed provide different contrast than appears in conventional images.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2015년도 전력전자학술대회 논문집
• /
• pp.299-300
• /
• 2015

This paper proposes current-fed bi-directional DC-DC converter using a resonance (CF-BCR) with wide output voltage range. The steady state analysis and operation principles of CF-BCR are introduced. To increase the output voltage range with satisfying soft switching condition, switching frequency, duty and number of times of the resonance are controlled. The proposed converter and its control method are verified by theoretical analysis and PSIM simulation.

• 설비공학논문집
• /
• 제17권2호
• /
• pp.165-172
• /
• 2005

Heat transfer enhancement of three types of brazed plate heat exchangers has been evaluated experimentally. The effects of flow resonance in a plate heat exchanger on the heat transfer rate and pressure drop have been investigated in a wide range of mass flow rates in detail. The problem is of particular interest in the innovative design of a plate heat exchanger by flow resonance. The results obtained indicate that both heat transfer coefficient and pressure drop are increased as mass flow rate is increased, as expected. It is also found that the heat transfer enhancement is increased with an increase in the plate pitch, while the heat transfer is decreased with a decrease in the chevron angle. Pressure drop also increased with an increase in the plate pitch and with a decrease in the chevron angle. Heat transfer enhancement in the plate heat exchangers is maximized by flow resonance and the resonance frequency of the present plate heat exchangers is found to be in the range of $10~15\;Hz$.

• Journal of Power Electronics
• /
• 제15권4호
• /
• pp.861-875
• /
• 2015

This paper presents a wide frequency range LLC resonant controller IC for LED backlight units. In this paper a new phase-domain resonance deviation prevention circuit (RDPC), which covers a wide frequency and input voltage range, is proposed. In addition, a wide range gate clock generator and an automatic dead time generator are proposed. The chip is fabricated using 0.35 μm BCD technology. The die size is 2 x 2 mm2. The frequency of the clock generator ranges from 38 kHz to 400 kHz, and the dead time ranges from 300 ns to 2 μs. The current consumption of the LLC resonant controller IC is 4 mA for a 100 kHz operation frequency using a supply voltage of 15 V.

• 한국소음진동공학회논문집
• /
• 제15권2호
• /
• pp.219-224
• /
• 2005

Vibration response of the tower structure of a 750kW wind turbine (W/T) generator is investigated by measurement and analysis. Acceleration response of the W/T tower under various operation condition is monitored in real time by the vibration monitoring system using LabVIEW. Resonance state of the tower structure is diagnosed in the operating speed range. Resonance frequency range of the test model is investigated with the wind speed data of the test site. To predict the tower resonance frequency, tower is modeled as an equivalent beam with a lumped mass and Rayleigh energy method is applied. Calculated tower bending frequency is in good agreement with the measured value and the result shows that the simplified model can be used in the design stage of the W/T tower.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1999년도 제17회 학술발표회 논문개요집
• /
• pp.208-208
• /
• 1999

It is found that with increasing power, the measured electron energy distribution by Langmuir probe evolves into a Druyvesteyn-like electron energy distribution in the low-pressure regime of 1mTorr in a small inductively coupled plasma. Electron bounce resonance is introduced to explain the transition of the electron energy distribution against the rf power, The energy diffusion coefficients which determine the shape of the electron energy distribution in elastic range are calculated with and without electron bounce resonance. This electron energy distribution transition is well explained by the electron bounce resonance.

• 한국음향학회지
• /
• 제38권3호
• /
• pp.340-343
• /
• 2019

본 논문은 동력차에서 견인전동기 기진 주파수와 견인전동기 강체 모드 공진 문제로 인해 발생할 수 있는 현상에 대해 소개하고, 이를 제어하는데 효과적인 설계인자를 해석적으로 검토해보았다. 회전 속도가 변하는 회전기기의 경우, 공진 문제를 해결하기 위해서는 공진주파수 대역을 상용 운전 범위 바깥으로 이동시키거나 동강성을 크게 하는 등의 방법을 통하여 공진 응답이 낮아지도록 하는 방안이 있다. 견인전동기의 운전 범위는 일반적으로 0 r/min ~ 4800 r/min으로 대차모드가 이 운전 영역대를 벗어나게 설계하는 것은 현실적으로 불가능 하다. 따라서 공진 응답에 영향을 주는 설계 인자를 찾아 이를 적절하게 조정하여야 한다. 유한요소 해석 검토 결과, 견인전동기 강체모드 공진 응답에 영향을 주는 설계인자는 트랜섬파이프 간격으로 간격이 지나치게 넓게 설계될 경우 견인전동기 기진력과 강체 모드 간 공진 시 과도한 진동이 발생될 수 있음을 파악하였다.