• Title/Summary/Keyword: Resonace

Search Result 25, Processing Time 0.025 seconds

Origin of the Initial Permeabiliy of Ni0.8-xZn0.2CoxFe2O4+δ Ferrite (Ni0.8-xZn0.2CoxFe2O4+δ조성 페라이트의 투자율 변화 기구)

  • 안용운;김종령;오영우
    • Journal of the Korean Institute of Electrical and Electronic Material Engineers
    • /
    • v.17 no.1
    • /
    • pp.46-51
    • /
    • 2004
  • The cause for the variation of the initial permeability according to the Co substitution of Ni-Zn ferrite used in the LC resonance filter for the power line communication is studied. The initial permeability decreases as the quantity of Co diminishes, and the saturation magnetization increases as the quantity increases. Because the sintering density and the microstructure of ferrite show little change, the variation of the initial permeability can't be explained by the density, microstructure nor the saturation magnetization factor. The magnetocrystalline anisotropy increases, similar with the saturation magnetization, as the quantity of Co increases. The increase of magnetocrystalline anisotropy value makes the domain wall energy grow, which leads to the decrease of the initial permeability, because there's linear law between the magnetocrystalline anisotropy and the domain wall energy. The resonance frequency to Co substitution moved to high frequency band, due to the close relationship with domain wall energy, Initial permeability decreaed a little with an increase of Co contents, but resonace frequency moved to high frequency band. as a result of that, when Co was added 0.05 mol, initial permeability and resonace frequency was 75 and 25 MHz respectively.

LCL-resonace-inverter for EMC(Electromagnetic casting) with frequency tracking and constant power control (주파수추종과 전력제어가 가능한 전자기 연속주조용 LCL공진형 인버터)

  • KWON K.Y.;YOUN K. S.;HAN M,H.;KWON W.H.
    • Proceedings of the KIPE Conference
    • /
    • 2001.12a
    • /
    • pp.155-158
    • /
    • 2001
  • 본 논문에서는 LCL공진형인버터를 사용하여 넓은 부하의 변화에 대해서도 공진주파수 추종제어와 공급전력제어가 가능한 전자기 연속주조제어기를 설계하고 이의 특성을 모의실험을 통하여 확인하였다.

  • PDF

The Improvement Method of Transfer Noise by Power Islands Resonace (Power Islands의 공진에 의한 잡음 전달 개선 방법)

  • 이신영;권덕규;이해영
    • Proceedings of the International Microelectronics And Packaging Society Conference
    • /
    • 2002.11a
    • /
    • pp.173-176
    • /
    • 2002
  • 본 논문에서는 파워 아일랜드(power island)에서 발생되는 잡음 전달을 개선하는 방법에 대해서 연구하였다. 일반적으로 파워 아일랜드는 각 파워 버스(power bus)의 구조적 공진에 의해 잡음 전달이 증가하는 단점이 있다. 따라서 본 논문에서는 두 가지의 잡음 전달 개선 방법을 제시하였다. 첫 번째로 잡음원의 위치를 변화시킴으로서 구조적 공진을 억제하였다. 두 번째로 공진이 발생할 경우 잡음 전달을 감소시키기 위해서 EGI(Elevated Ground Island)를 제안하였다. 해석결과, 잡음원의 위치에 따라 파워 버스의 공진을 최소로 감소시켰으며, EGI를 이용하여 잡음 전달을 효과적으로 감소할 수 있었다.

  • PDF

Fabrication and Characteristics Comparison of Piezoresistive Four Beam Silicon Accelerometer Based on Beam Location (빔 위치변화에 따른 4빔 압저항형 실리콘 가속도 센서의 제조 및 특성비교)

  • Shin, Hyun-Ok;Son, Seung-Hyun;Choi, Sie-Young
    • Journal of the Korean Institute of Telematics and Electronics D
    • /
    • v.36D no.7
    • /
    • pp.26-33
    • /
    • 1999
  • In order to examine the effect of beam location n the performance of bridge type piozoresistive silicon accelerometer, three sensors having different location of beams were simulated by FEN(finite element method) and fabricated by RIE(reactive ion etching) and KOH etching method using SDB(silicon direct bonding) wafer, Results of the FEM simulation present that the 1st resonace frequency and Z axis sensitivity of each sensor are identical but the 2nd, and the 3rd resonace frequency and X, Y axis sensitivity are different. Even though the 1st resonance frequency and Z axis sensitivity measured from fabricated sensors do not perfectly coincide with each other, all 3 type sensors present 180 ~ 220N/G of Z sensitivity at 5 V supply voltage and 1.3 ~ 1.7kHz of the 1st resonance frequency and about 2% of lateral sensitivity.

  • PDF

Vibration characteristics between levitation air-gap and switching system girders (상전도 흡인식 자기부상열차 분기기 주행시의 부상공극변동과 분기기 거더의 진동 특성)

  • Shin, Hyeon-Jae;Lee, Jong-Min;Choi, Jang-Young
    • Proceedings of the KSR Conference
    • /
    • 2011.05a
    • /
    • pp.824-829
    • /
    • 2011
  • EMS-type Maglev vehicle maintains constant levitation air-gap between electromagnet and guideway by using gap sensor. The other words, when Maglev vehicles levitating over the guideway, mass of the vehicle effects through 1st (electromagnetic air-gap control) and 2nd (air-spring) suspension to grider. Resonace between electromagnetic suspension and grider could be occurred, which causes instability and poor ridecomfort. This paper is to test the dymanic interaction between levitation air-gap and switching system grider that has less mass and high natural frequencies than other type of general girders.

  • PDF

Performance Evaluation of Fin-Stabilizer by Model Test and Time-domain Simulation (시뮬레이션과 모형시험을 통한 핀 안정기의 성능평가)

  • 홍사영;김현조;최윤락;신영균;유병석;이승준
    • Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
    • /
    • 2001.10a
    • /
    • pp.86-90
    • /
    • 2001
  • Demand of good seakeeping perfomace is increasing for sea going vessels such as cruisers, naval ships and container ships. Especillay roll motion is one of major concerns in evaluation of seakeeping performance due to its large resonace motion. Since large roll resonance motion is mainly arised from inherent small damping. use of additional mechnism to provide roll damping can significantly reduce roll motion. In this paper, a reliable performace evaluation method of fin stabilizer, which is very useful for stabilizing roll motion of mid and high speed vessls, is described. Model test and time domain simulation methods are adopted for performance evaluation in which real operating situation of fin stabilizer can be exactly modelled. Model test and simulation results show good correlations between model test and simulation results.

  • PDF

Physical Principles of Magnetic Resonance Imaging in Animal (동물에서 자기 공명 영상 진단의 물리적 원리)

  • 김종규
    • Journal of Veterinary Clinics
    • /
    • v.16 no.1
    • /
    • pp.75-79
    • /
    • 1999
  • Magnetic resonance imaging (MRI) is an imaging technique used to produce high quality images of the inside of the animal body. MRI is based on the principles of nuclear magnetic resonance (NMR) and started out as a tomographic imaging technique, that is it produced an image of the NMR signal in a thin slice through the animal body. The animal body is primarily fat and water, Fat and water have many hydrogen atoms. Hydrogen nuclei have an NMR signal. For these reasons magnetic resonance imaging primarily images the NMR signal from the hydrogen nuclei. Hydrogen protons, within the body align with the magnetic field. By applying short radio frequency (RF) pulses to a specific anatomical slice, the protons in the slice absorb energy at this resonant frequency causing them to spin perpendicular to the magnetic field. As the protons relax back into alignment with the magnetic field, a signal is received by an RF coil that acts as an antennae. This signal is processed by a computer to produce diagnostic images of the anatomical area of interest.

  • PDF

Intracranial ipoma : CT and MRI Findings

  • Lee, Jong-Deok;Choi, Chang-Min
    • Journal of Physiology & Pathology in Korean Medicine
    • /
    • v.19 no.3
    • /
    • pp.830-833
    • /
    • 2005
  • Intracranial lipomas are rare lesions, which are believed to be congenital malformations. They are usually asymptomatic incidental findings and localized in the midline. However, they may occasionally produce neurological symptoms such as seizure, headache, mental changes, paresis. Currently, diagnosis of intracranial lipomas is made on based of imaging modalities, particularly Magnetic resonance imaging(MRI). Because Lipomas are strongly adherent to the surroundings and typically enclose both vessels and nerves, Surgical approach is rarely indicated.

Structure of an Antimicrobial Peptide Buforin II

  • Yi, Gwan-Su;Park, Chan-Bae;Kim, Sun-Chang;Chaejoon Cheong
    • Proceedings of the Korean Biophysical Society Conference
    • /
    • 1996.07a
    • /
    • pp.29-29
    • /
    • 1996
  • The structure of an antimicrobial peptide buforin II has been studied by $^1$H NMR and CD spectroscopy. Buforin II is flexible and random structure in H$_2$O but the parts of buforin II become helical structure in trifluoroethanol (TFE)/H$_2$O (1:1, v/v) solution. From the restrained molecular dynamics calculation using NMR data, we obtained the possible conformation of buforin II in TFE/H$_2$O solution. (omitted)

  • PDF