• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.4
• /
• pp.984-995
• /
• 1996

Data errors according to the various noises caused in the satellite communication links are corrected by the Viterbi decoding algorithm which has extreme error correcting capability. In this paper, we designed and implemented a convolutional encoder and Viterbi decoder ASIC which is used to encode the input data at the transmit side and correct the errors of the received data at the receive side for use in the VSAT communication system. And this chip may be used in any BPSK, QPSK, or OQPSK transmission system. The ambiguity resolver corrects PSK modem ambiguities by delaying, interting, and/or exchanging code symbol to restore their original sequence and polarity. In case of previous decoding system, ambiguity state(AS) of data is resolved by external control logic and extra redundancy data are needed to resolve AS. But, by adopting decoder proposed in this paper, As of data is resolved automatically by internal logic of decoder in case of continuous mode, and by external As line withoug extra redudancy data in burst mode case. So, decoding parts are simple in continuous mode and transmission efficiency is increased in bust mode. The features of this chip are full duplex operation with independent transmit and receive control and clocks, start/stop inputs for use in burst mode systems, loopback function to verify encoder and decoder, and internal or external control to resolve ambinguity state. For verification of the function and performance of a fabricated ASIC chip, we equiped this chip in the Central and Remote Earth Station of VSAT system, and did the performance test using the commerical INTELSAT VII under the real satellite link environmens. The results of test were demonstrated the superiority of performance.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.7 no.5
• /
• pp.472-481
• /
• 2002

In this paper, the instantaneous flux Is applied to control the position of the SRG (Switched Reluctance Generator) without position sensor. The position information of the rotor is required in the drive of SRG. These data are generally obtained by a shaft encoder or resolver. In some cases, the EMI(Electro Magnetic Interference), vibration, thermal, and humidity environments may cause the difficulties in maintaining the satisfactory performance for the position detection. Therefore, the elimination of the position and speed sensor is needed. In this paper, a new method for the position estimation of the SRG is proposed. The estimation of the flux is calculated by using the measured voltage and current. The rotor position gets from the flux profile. The output voltage is also controlled constantly by PR control algorithm. These methods are verified by computer simulations md experiments using DSP. Experimental results certificate that the proposed method is able to control the SRG stable, and keep the output voltage constant in spite of changing of the load.

• Journal of the Korean Society of Industry Convergence
• /
• v.17 no.3
• /
• pp.93-102
• /
• 2014

Recently the interest in permanent magnet alternating motor using for electric compressor become great. Especially the research on Interior Permanent Magnet Motor has been doing actively for its advantages in the energy density and the efficiency. In order to control the output of motor to the desired value, the current control or speed control of motor are required. The accurate detection of rotor position and speed information are necessary for the control of motor. In general, the encoder, hall sensor, and resolver are used to obtain the information of motor position and speed and the speed detection algorithm, M/T method, is applied. However, the M/T method causes the error depending on rotor speed. Therefore, this M/T speed detection method is not perfect. In this paper, it is proposed that the PI control with a 1st transfer function and the integration element between velocity and position are composed in series and this feeds back to the reference value of position angle. The proposed algorithm is a function of the integral elements 2nd term, speed element, is used as an output. Thus, it is possible to detect the correct speed by configuring like the mechanical structure similarly. The proposed algorithm is verified by using PSIM DLL and is applied to the BLAC motor drive. And also it is confirmed that this system estimates the accurate speed regardless of rotor speed changes. As a example, the experimental results and simulations shows that the proposed method is very effective.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.22 no.2
• /
• pp.139-152
• /
• 1998

In the present study, the flow characteristics of developing laminar oscillatory flows in a square -sectional 180 deg. curved duct are investigated experimentally. The experimental study using air in a square-sectional 180 deg. curved duct is carried out to measure velocity distributions with a data acquisition and LDV (Laser Doppler Velocimetry) processing system. In this system, Rotating Machinery Resolver (RMR) and PHASE program are used to obtain the results of unsteady flows. The major flow characteristics of developing oscillatory flows are found by analyzing velocity curves, mean velocity profiles, time-averaged velocity distribution of secondary flow, wall shear stress distributions, and entrance lengths. In a lower dimensionless angular frequency, the axial velocity distribution of laminar oscillatory flow in a curved duct shows a convex shape in a central part and axial symmetry. The maximum value of wall shear stress in a lower dimensionless angular frequency is located in an outside wall, but according to increasing the dimensionless angular frequency, the maximum of wall shear stress is moved to inner wall. The entrance lengths of laminar oscillatory flows in a square-sectional 180 deg. curved duct is obtained to 90 deg. of bended angle of duct in this experimental conditions.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2004.03a
• /
• pp.671-686
• /
• 2004

The shock-induced combustion ramjet (shcramjet) is a hypersonic airbreathing propulsion concept which over-comes the drawbacks of the long, massive combustors present in the scramjet by using a standing oblique detonation wave (a coupled shock-combustion front) as a means of nearly instantaneous heat addition. A novel shcramjet combustor design that makes use of wedge-shaped flameholders to avoid detonation wave-wall interactions is proposed and analyzed with computational fluid dynamics (CFD) simulations in this study. The laminar, two-dimensional Navier-Stokes equations coupled with a non-equilibrium hydrogen-air combustion model based on chemical kinetics are used to represent the physical system. The equations are solved with the WARP (window-allocatable resolver for propulsion) CFD code (see: Parent, B. and Sislian, J. P., “The Use of Domain Decomposition in Accelerating the Convergence of Quasihyperbolic Systems”, J. of Comp. Physics, Vol. 179, No. 1,2002, pages 140-169). The solver was validated with experimental results found in the literature. A series of steady-state numerical simulations was conducted using WARP and it was deter-mined by means of thrust potential calculations that this combustor design is a viable one for shcramjet propulsion: assuming a shcramjet flight Mach number of twelve at an altitude of 36,000 m, the geometrical dimensions used for the combustor give rise to an operational range for combustor inlet Mach numbers between six and eight. Different shcramjet flight Mach numbers would require different combustor dimensions and hence a variable geometry system in or-der to be viable.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.1
• /
• pp.951-954
• /
• 2005

This paper presents a study on the accuracy position Controller design for the Composite Smoke Bomb Rotational driving system using a BLDC servo motor. Function of Smoke Bomb is blind in the enermy's sight so that need to high response. The BLDC servo motor controller was designed with DSP(TMS320VC33), IGBT(Insulated Gate Bipolar. Transistor), IGBT gate driver and CPLD(EPM7128). This paper implements those control with vector control and MIN-MAX PWM. Vector control requires information about rotor positions, a resolver should be used to achieve that. The main controller is implemented with a TMS320VC33 high performance floating-point DSP(Digital Signal Process) and PWM Generator is embodied using EPM7128.

• Iberoamérica
• /
• v.12 no.1
• /
• pp.55-86
• /
• 2010

Después de la década 1990, la soja ha sido un agro-producto más importante en Paraguay. Pero la soja ha convertido el campo rural en la zona de la producción, es decir, la zona de sojización, para la exportación. Por otro lado, el campo rural se ha deteriorado por el aumento de la extensión del cultivo sojal. Los cultivos se extienden a lo largo de cientos de kilómetrios y afectan zonas muy cercanas a comunidades, colonias y otros asentamientos campesionos e indígenas, incluyendo escuelas, hogares, charcas familiares y comunitarias. Los sojeros utilizaron los agrotóxicos que contaminaron la tierra, agua y alimentos. Aunque los campesinos no quieren vender sus tierras, no ven otras alternativas ante los graves problemas que conllevan las masivas fumigaciones. Ellos venden sus lotes y migraron a ciudades. Se pierde la soberanía territorial, pues las tierras pasan a manos extranjeras, y la soberanía alimentaria, porque se desplaza la diversificación y los cultivos de subsistencia, expulsando a los campesions hacia las ciudades. Ante el agravamiento de la situación causado por el incremento del cultivo de la soja, los campesinos empezaron a resistir, es decir, desarrollar 'la guerra de la soja' contra los sojeros y el gobierno paraguayo que no tenia refuerzos de resolver los problemas. Los campesinos formaron coordinadoras por la defensa de sus tierras y de su modo de vida contra los sojeros. Las luchas y movilizaciones reclaman no sólo un nuevo tipo de reforma agraria sino también la defensa de la soberanía económica, alimentaria y territorial, el derecho a producir con la propia semilla y a desarrollar técnicas agrícolas adecuadas de acuerdo con la economía campesina y el equilibrio del medio ambiente, el desarrollo de formas sociales de producción y la democratización en el medio rural.

• Korean Journal of Legislative Studies
• /
• v.15 no.1
• /
• pp.39-63
• /
• 2009

Retrospecting the past 60 years of interactions between the executive and the legislature in Korea, it is found that the Korean National Assembly is neither a minimal legislature nor a marginal legislature any more. The symbolic role of the Assembly has acquired a remarkable growth and profound strength and there is no need to worry about institutional viability any further. However, its role as a resolver or manager of social conflicts is still under the dominance of the executive and shows even an indication that it might be worsened. Such incapability of the legislature owed much to the vertical control from the outside especially during the authoritarian regimes, however, nowadays it owes much to the inability of consensus building among the out-bursting controversial and horizontal opinions inside of it. Not sufficient managerial capability required for exercising autonomous decision making power efficiently is a major detrimental factor. It traces back to the inability of party politics and demassifying political leadership. Normalization of party politics is identified as one of the essential prerequisites for Korean political development in this regard.

• The Journal of the Korea Contents Association
• /
• v.8 no.1
• /
• pp.318-327
• /
• 2008

With the advance of information technologies and the spread of Internet use, the volume of usable information is increasing explosively. A content recommendation system provides the services of filtering out information that users do not want and recommending useful information. Existing recommendation systems analyze the records and patterns of Web connection and information demanded by users through data mining techniques and provide contents from the service provider's viewpoint. Because it is hard to express information on the users' side such as users' preference and lifestyle, only limited services can be provided. The semantic Web technology can define meaningful relations among data so that information can be collected, processed and applied according to purpose for all objects including images and documents. The present study proposes a content recommendation search system that can update and reflect personalized profiles dynamically in semantic Web environment. A personalized profile is composed of Collector that contains the characteristics of the profile, Aggregator that collects profile data from various collectors, and Resolver that interprets profile collectors specific to profile characteristic. The personalized module helps the content recommendation server make regular synchronization with the personalized profile. Choosing music as a recommended content, we conduct an experience on whether the personalized profile delivers the content to the content recommendation server according to a service scenario and the server provides a recommendation list reflecting the user's preference and lifestyle.

• Journal of Information Management
• /
• v.40 no.4
• /
• pp.1-22
• /
• 2009

Large-scaled information extraction plays an important role in advanced information retrieval as well as question answering and summarization. Information extraction can be defined as a process of converting unstructured documents into formalized, tabular information, which consists of named-entity recognition, terminology extraction, coreference resolution and relation extraction. Since all the elementary technologies have been studied independently so far, it is not trivial to integrate all the necessary processes of information extraction due to the diversity of their input/output formation approaches and operating environments. As a result, it is difficult to handle scientific documents to extract both named-entities and technical terms at once. In this study, we define scientific as a set of 10 types of named entities and technical terminologies in a biomedical domain. in order to automatically extract these entities from scientific documents at once, we develop a framework for scientific core entity extraction which embraces all the pivotal language processors, named-entity recognizer, co-reference resolver and terminology extractor. Each module of the integrated system has been evaluated with various corpus as well as KEEC 2009. The system will be utilized for various information service areas such as information retrieval, question-answering(Q&A), document indexing, dictionary construction, and so on.