• 콘크리트학회지
• /
• 제4권1호
• /
• pp.135-145
• /
• 1992

최근 철근콘크리트 건축물의 초고층화 추세에 따라 건축물의 설계시에 고강도의 건설재료, 부재단면의 축소, 직경이 큰 철근의 사용이 요구되고 있다. 이에 따라 구조물의 다른 부위에 비하여 접합부 영역의 응력 집중현상이 커지고, 철근콘크리트 구조물에 고강도 콘크리트를 적용하므로써 고정하중의 감소, 부재단면의 축소, 부재내력의 증대, 장 스팬 구조물의 축소 가능, 경제성의 향상을 가져올 수 있는 장점으로 인하여, 철근콘크리트 구조물에 고강도 콘크리트의 이용은 더욱 증대할 것으로 예상된다. 그러나 고강도콘크리트는 보통 콘크리트와 다른 특성, 특히 최대내력이후의 강도저하가 현저하고 파괴성상이 취성적인 성질을 지니고 있으므로 실제 구조물에 적용하기 앞서 구조물의 안전성 측면에서 부재 실험을 통하여 정확한 역학적 특성을 규명할 필요가 있다. 따라서 본 연구에서는 반복 주기하중을 받는 고강도 철근콘크리트 보-기둥 접합부의 거동을 파악하고, 접합부의 내진성능 개선을 위한 새로운 설계방법을 실제 초고층 철근콘크리트 건축물의 설계를 위한 기초 자료로 제시하였다.

• 한국식품과학회지
• /
• 제42권6호
• /
• pp.743-749
• /
• 2010

본 연구는 2종류의 저항전분(RS2, RS3)이 loperamide 유도 변비 쥐의 체중변화와 배변상태에 미치는 영향을 다른 식이섬유 급원과 비교하여 실험 관찰하였다. 실험동물은 Sprague-Dawley계 수컷 쥐 60마리를 사용하였으며 정상 대조군, 변비 셀룰로오스군, 변비 펙틴군, 변비 RS2군, 변비 고RS2군, 변비 RS3군의 6개군으로 나누었다. AIN-76 기본식이에 각각 다른 식이섬유를 첨가하고 에너지 밀도가 동일하게 조제한 실험식을 5주 동안 투여하여 변비 쥐의 식이효율과 체중 변화 및 배변상태와 장통과시간을 분석 비교하여 다음과 같은 결과를 얻었다. 저항전분 투여군들은 셀룰로오스군에 비해서 식이효율과 체중 증가가 유의적으로 낮았고 펙틴군과는 차이가 없었다. 소장의 길이는 모든 식이섬유군간에 유의적 차이가 없었으나, 대장의 길이는 저항전분군들에서 펙틴군에 비해 유의적으로 길었고, 셀룰로오스군과는 유의적인 차이가 없었다. 사료섭취량 대비 분변 배설량은 저항전분 RS2의 경우는 펙틴군 보다는 높았고 셀룰로오스군 보다는 유의적으로 낮았으나 RS3군은 셀룰로오스군과 유의적인 차이가 없이 많았다. 분변의 외형은 RS3군과 고RS2군은 셀룰로오스군과 유사하였으나 저RS2군은 펙틴군과 유사하였다. 변 중 수분함량은 식이섬유 간에 유의적 차이가 없었으나 장 통과시간은 셀룰로오스군과 RS3 투여군이 펙틴군에 비해 유의적으로 단축되는 것으로 나타났다. 본 연구 결과는 변비 동물에서 저항전분의 투여는 식이효율과 체중 증가를 억제하는 작용이 있고, 저항전분중 RS3는 셀룰로오스와 마찬가지로 변비 동물의 배변량을 증가시키고 장 통과시간을 단축시켜 배변 상태를 개선시킬 수 있는 가능성을 나타내었다.

• 한국작물학회지
• /
• 제49권5호
• /
• pp.429-433
• /
• 2004

A single recessive gene, rxp, controls the bacterial leaf pustule (BLP) resistance in soybean and in our previous article, it has been mapped on linkage group (LG) D2 of molecular genetic map of soybean. A total of 130 recombinant inbred lines (RILs) from a cross between BLP-resistant SS2-2 and BLP-susceptible Jangyeobkong were used to identify molecular markers linked to rxp. Fifteen simple sequence repeat (SSR) markers on LG D2 were screened to construct a genetic map of rxp locus. Only four SSR markers, Satt135, Satt372, Satt448, and Satt486, showed parental polymorphisms. Using these markers, genetic scaffold map was constructed covering 26.2cM. Based on the single analysis of variance, Satt372 among these four SSR markers was the most significantly associated with the resistance to BLP. To develop new amplified fragment length polymorphism (AFLP) marker linked to the resistance gene, bulked segregant analysis (BSA) was employed. Resistance and susceptible bulks were made by pooling equal amount of genomic DNAs from ten of each in the segregating population. A total of 192 primer combinations were used to identify specific bands to the resistance, selecting three putative AFLP markers. These AFLP markers produced the fragment present in SS2-2 and the resistant bulk, and not in Jangyeobkong and the susceptible bulk. Linkage analysis revealed that McctEact97 $(P=0.0004,\;R^2=14.67\%)$ was more significant than Satt372, previously reported as the most closely linked marker.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.265-265
• /
• 2017

This study was carried out to develop rice variety integrated with rice bacterial blight resistance gene and to know the information of major agronomic traits of developed variety. Advanced backcross Lines 21 having Xa3 and Xa21 gene cross from japonica cultivar Hwanggeumnuri and indica variety IRBB21. Days after seeding and culm length of ABLs21 were 108 days (Aug. 16) and 76 cm, respectively. Ripened grain rates was 87.4 %, which was similar to the parents. 1000 grain weight of brown rice of ABLs21 was 21.4g, which was lower than the donor parent. Milled rice yield of ABLs21 was 532 kg/10a, which was smaller than recurrent parent and higher than the donor parent. Grain length/width ratio of brown rice was form of japonica with short-ellipse and glossiness of cooked rice has japonica trait. Head rice rate showed a large difference compare to the donor parent and similar to the recurrent parent. ABLs21 would be useful genetic resources for resistance breeding program against bacterial blight.

• 한국잠사곤충학회지
• /
• 제44권1호
• /
• pp.22-27
• /
• 2002

용천뽕을 수원지방에서 비닐피복 밀식재배법으로 관리한 경우의 재배학적 특성은 다음과 같으며 동해발생시의 육잠 성과의 몇가지 예를 고찰하였다. 1. 춘기 탈포기는 개량뽕보다 3일 빠르나 5개엽기는 동일한 중생뽕이고 춘잠기 수확 당시 신소장은 길다. 2. 용천뽕의 수량은 개량뽕보다 춘잠기에 많고 추잠기에는 적은 춘형이다. 3. 용천뽕은 개량뽕보다 가지수가 약간 많고 지조장도 길어서 가지뽕치기에 적합하다. 4. 용천뽕은 뽕나무 눈마름병과 줄기마름병에 약간 강하고 오갈병에 다소 약하다. 5. 용천뽕은 내동성이 극히 강하여 동해상습지에 적합하며, 연도간의 육잠규모를 안정적으로 유지할수 있는 경영상의 이점이 있다. 춘천지방에서의 육잠성과에 있어서 동해의 빈도가 2년 1회의 경우에는 용천뽕이 개량뽕보다 11%증수 효과가 있었으며, 3년 1회 빈도의 경우는 두 품종이 비슷하였다.

• 한국작물학회지
• /
• 제51권4호
• /
• pp.318-321
• /
• 2006

This study was conducted in 2002 and 2003 to investigate variation on rice quality associated with cooking, and eating qualities under the three different fertilizer levels, none fertilizer level($N-P_2O_{5-}K_2O=0-0-0kg/ha$), ordinary fertilizer level($N-P_2O_{5-}K_2O=1l0-45-57kg/ha$), and heavy fertilizer level($N-P_2O_{5-}K_2O=180-90-110kg/ha$). The eight resistant near-isogenic lines(NILs) for bacterial blight in rice were examined for grain appearances, several physicochemical properties, and palatability value measured by Toyo taste meter. Significant variations in NILs(V), Years(Y), and VxY interaction were recognized in grain length and palatability value under the none fertilizer cultivation, in grain width under the heavy fertilizer cultivation, and in white belly ratio under the three different fertilizer cultivations, respectively. According to increase the fertilizer application rate, variation in grain length and grain width were not significant, but grain thickness was thinner under the ordinary and heavy fertilizer cultivations than under the none fertilizer cultivation. On the other hand, white belly ratio, protein content and Mg/K ratio increased, while amylose content and palatability value lowered. Alkali spreading value lowed under the heavy fertilizer cultivation than under the none and ordinary fertilizer cultivations. Palatability value was significantly low in the line carrying XalJ than in the other lines under the ordinary fertilizer cultivations.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2003년도 학술.기술논문발표회
• /
• pp.139-142
• /
• 2003

Traditionally, the thickness of fire protection materials of structural elements such as beam and column have been decided by fire test using the predominant steel section of $H-300{\times}300{\times}10{\times}15$ for column and $H-400{\times}200{\times}8{\times}13$ for beam in Korea. But this way of determination of fire protection thickness yields very unduly results. Because the temperature-increment rate of structural steel elements depends mainly on magnitude of their cross-areas. In general, the thicker size of cross-areas for structural elements, the lower temperature shows up. It had already proved that the fire protection thickness only depends on the size of cross-areas and the fire protection method for three-fide or four-side exposed conditions in European countries, the United State of America and so on. To demonstrate there would be differences among various cross-areas for structural elements, we conducted several fire tests with full-scale specimens of beams and columns. For the determination of critical temperature for steel section when the fire resistant performance is needed to be decided, we conducted with a loaded fire test for beam and column, respectively. The small column in 1.0 meter length and beam in 1.5 meter length were used in order to deprive the rational fire protection thickness of structural elements such as beam and column, respectively. After test, we could obtain there were significant temperature lass between higher cross-areas and lower cross-areas. The critical temperature of steel as a criterion is used 538$^{\circ}C$ for column and 593$^{\circ}C$ for beam which is from ASTM E 119 because we don't make provisions as critical temperature by elements. We could consider that the best way of determination of fire protection thickness is using the following multi-regression equation which was deprived from several fire tests using the concept of section factor, FR(column) = 0.17 +5191.49t A/Hp + 40.77t, FR(beam) = 0.25 +6899.31t A/Hp + 32.60t(where, FR means fire resistant time, t means thickness, A means cross-area and Hp means heated parameter).

• 한국임상수의학회지
• /
• 제37권1호
• /
• pp.1-8
• /
• 2020

Canine otitis externa is a common disorder in small animal practice with prevalence up to 20%. In a large percentage of cases, canine otitis externa is a chronic and recurrent disease also associated with drug-resistant bacteria that is difficult to treat with traditional antibiotics. Photodynamic therapy (PDT) is a new strategy to exterminate pathogenic microorganisms such as bacteria and fungi. The purpose of this study was to investigate the effectiveness of photodynamic therapy against canine otitis externa using three photosensitizer (PS); 5-Aminolevulinic acid (5-ALA) and Methyl aminolevulinic acid (MAL) with semiconductor laser diode (SLD, 635nm of wave length), Chlorophyll-lipoid complex (CLC) with light-emitting diode (LED, 660nm of wave length). After PDT, dogs showed improved Otitis Index Score (OTIS) in swelling, exudate, odor, and pain. A result of the cytology test revealed decrease of bacteria and malassezia count in the oil immersion field and colony forming units count. PDT was effective as a bacteriocide of methicillin-resistant Staphylococcus pseudintermedius (MRSP) and a fungicide of Malassezia pachydermatis. MAL and 5-ALA were more effective PS against canine otitis externa than CLC. These results suggest that PDT is a new strategy to exterminate pathogenic microorganisms such as bacteria and fungi. PDT can be considered as a new therapeutic approach for canine recurrent otitis externa and a countermeasure to drug resistance that is a disadvantage of traditional antibiotic and antifungal therapy.

• The Plant Pathology Journal
• /
• 제25권1호
• /
• pp.54-61
• /
• 2009

An infectious full-length clone of Soybean mosaic virus (SMV) strain G5H was constructed under the control of the cauliflower mosaic virus 35S promoter. The cloned SMV G5H established infections upon simple rub-inoculation of soybean leaves with intact plasmid DNA. We demonstrated that this SMV G5H infectious DNA clone caused typical characteristic symptoms and virulence of SMV strain G5H in twelve tested soybean cultivars. Soybean cultivars Lee74, Somyungkong and Sowonkong developed systemic mosaic symptom while Kwanggyo, Taekwangkong, Hwangkeumkong and Geumjeongkong-l showed systemic necrosis. In contrast, Geumjeongkong-2, Jinpumkong-2, L29, V94-5152 and Ogden showed resistant response against SMV-G5H infection. We also determined full-length sequence of cloned SMV-G5H. The phyogenetic analyses reveal that SMV-G5H is most closely related to SMV-G5, and support that SMV-G5H might be derived from SMV-G5 by recombination rather than mutation.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2009년도 춘계 학술대회 제21권1호
• /
• pp.543-544
• /
• 2009

고강도콘크리트의 내화성능 증진에 효과적인 것으로 알려진 섬유(NY, PP)는 섬유의 길이조합과 혼입율에 따라 유동성에 차이가 있다. 본 논문에서는 섬유의 길이조합과 혼입율이 고강도콘크리트의 유동성과 레올로지 특성에 미치는 영향을 분석하기 위하여 몰탈시험체를 대상으로 미니 슬럼프 플로우(Mini slump-flow), 간이 V-lot 및 회전점도계에 의한 점도측정을 수행하였다. 실험결과, 섬유의 길이 조합에 따른 유동특성은 큰 차이가 없으나 섬유혼입률이 증가할수록 점도는 큰 것으로 나타났다.