• Journal of Nutrition and Health
• /
• v.34 no.5
• /
• pp.541-546
• /
• 2001

This study examined the effect of various types of exercise on bone formation and resorption in rat. Five-week-old male Sprague-Daweley rats were randomly assigned to one of four groups with 10 animals in each; Control, Treadmill, Swimming, Resistance. The exercise regimen consisted of treadmill running at 25m/min, 1 hr per day, 5 days a week, and swimming for 1 hr per day, 5 days a week. Resistant exercise type with weight-bearing was designed to extend lower and upper extremities in order to feed the diet and water. Food intake showed no significant difference among groups but body weight gain and food efficiency were significantly increased in Control group as compared with exercise groups. Femur and tibia length and weight were higher in Control group and the density of therm tended to be higher in exercise groups than Control group, but this difference was not statistically significant. The breaking force of femur was the highest in Swimming group and tibia was the highest in Resistance group among groups, while there was no signigicant difference among the exercise groups. The calcium content of femur was significantly increased in Resistance group than the other groups. Calcium intake and urinary calcium showed no significant difference among groups, while calcium absorption and retention were significantly higher in exercise group than Control group. In conclusion, exercise training enhanced bone formation due to the positive effect on metabolism of calcium and bone which were different according to the types of exercise. (Korean J Nutrition 34(5) : 541∼546, 2001)

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.8 no.4
• /
• pp.175-183
• /
• 2004

The most important element is a rise ratio when regarding beauty and economics of arch bridges. Only the effect of dead load has been considered to decide the rise ratio. In this study, when going over the rise ratio of arch bridges, examined the problems, that the determination of the rise ratio by the dead load has, by adding the factor of a determination of optimum rise ratio, which is not only the effect of the dead load that has been currently considered but also the problem with respect to dynamic stability that is now taken seriously. Synthetically, when deciding rise ratio that is investigated in basic step of design, it is necessary to consider the evaluation dynamic stability.

• Journal of Periodontal and Implant Science
• /
• v.32 no.3
• /
• pp.603-614
• /
• 2002

Human gingival fibroblasts have proven to useful as a species specific cell culture system in various system on periodontal disease and regeneration. However, their use is limited, since they are hard to obtain and lifespan is short due to replicative senescence. To overcome these disadvantages, we transfected primary human gingival fibroblasts by the E6 and E7 genes of the Human papilloma virus(HPV) 16. The full length of HPV 16 E6 and E7 was cloned from the pBR322 into BamHl and Sal I of a pBabe vector including hygromycin B resistance. Before pBabeE6/E7 plasmid transfection, peak 8 GFP including G418 resistance was transfected into primary GF to check the transfection efficency. PBabe E6/E7 plasmid was transfected using Lipofectamine plus following manufacter's instruction into primary normal human gingival fibroblasts in 60mm dishes with FBS free DMEM. After 2 days of transfection, the cells were treated with hygromycin for 2 weeks until the transfected control cells died. The resulting hygromycin resistant colonies were pooled, and clonned, and sucessful　transfection was established for immortalized gingival fibroblast cell lines. Immoralized GF cells showed stellate shape, that is similar to that of orange grains, and more rapid growth and higher proliferation than that of primary gingival fibroblasts. This cell lines overcame crisis and could be cultured over 30 subcultured, could be use for three dimentional culture, epithelial-mesenchymal interaction study.

• Journal of Microbiology and Biotechnology
• /
• v.14 no.2
• /
• pp.417-421
• /
• 2004

A normal prion protein (PrPc) is converted to a protease resistant isoform (PrPsc) by an apparent self-propagating activity in bovine spongiform encephalopathies (BSE), which is a neurodegenerative disease. The cDNA encoding bovine PrP open reading frame (ORP) in Korean cattle was cloned by polymerase chain reaction (PCR). The cloned cDNA had a length of 795 base pairs which coded for a protein of 264 amino acid residues with a calculated molecular mass of 28.6 kDa. Identities of 90, 90, 79 and 78% on nucleotide and 94, 94, 84, and 84% on amino acid sequence were shown to PrP genes from sheep, goat, human, and mouse, respectively. The cloned DNA was ligated into the pQE30 expression vector and transformed into E. coli M15. The PrP was expressed by induction with isopropyl-$\beta$-D-thiogalactoside (IPTG) and purified on the Ni-NTA affinity column. High specific activities of the recombinant PrP were observed in the fraction of pH 5.8 eluate and showed a molecular mass of-29 kDa on SDS-PAGE and Western blot analysis.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.27 no.4
• /
• pp.241-248
• /
• 2007

Cytokinins are essential plant hormones that play crucial roles in various aspects of plant growth and development. By using mRNA differential display, we isolated a cytokinine-inducible cDNA encoding pathogenesis-related (PR) 4 from Arabidopsis amp1 mutant. The full-length PR4 cDNA, designated AtPR4, contains an open reading frame of 212 amino acids with calculated molecular mass of 22,900 Da and isoelectric point (pI) of 7.89. Genomic DNA blotting showed that the Arabidopsis genome has one copy of AtPR4. AtPR4 mRNA was induced by cytokinin and NaCl, but decreased by SA or JA treatment. PR proteins are induced in response to pathogen attack. Thus the AtPR4 gene isolated in this study may be a useful candidate for genetic engineering of forage crops for increased tolerance against pathogen.

• Korean journal of applied entomology
• /
• v.22 no.1 s.54
• /
• pp.41-44
• /
• 1983

In order to evaluate the technique of P-32 labelling method for screening lines of rice to whitebacked planthopper, the relationship between the amount of ingestion and feeding preference of insects were observed with the resistant and susceptible lines where characteristics were predetermined by comparing their feeding preference and antibiosis method. The feeding preference of the insects was significantly correlated with the amount of P-32 ingestion. It was more manifest in adults than nymphs of the whitebacked planthopper. The density of nymph and radioactivity of P-32 were high in the susceptible line. This suggested that deforming the ingestion amount of P-32 in the insects seemed to be useful technique for accurate screening. For this technique, the uniform labelling of P-32 on the rice seedings was prerequisite and the uniformity was increased by triming roots and leaves in the length and number.

• Nuclear Engineering and Technology
• /
• v.27 no.5
• /
• pp.775-783
• /
• 1995

This study is to assess the effects of increasing wall thickness on the safety margin of pressure tube in operating and of lowering initial hydrogen concentration on the DHC growth in respect to the improvement of the reliability of pressure tube in CANDU reactors. The pressure tube with thicker wall of 5.2 mm shows much higher safety margin for flaw tolerance by 25％ than the current 4.2mmm tube. The thicker pressure tubes have a great benefit in LBB assessment including the initial crack depth at which DHC occurs, the crack length at onset of leaking and the available time for action. The resistance for the pressure tube ballooning at LOCA accident is also increased with the thicker tube. The calculations for Heq concentration after 20 years of operation as a function of wall thickness and initial hydrogen concentration show that the 5.2 mm nil thickness tube with 5 ppm initial hydrogen concentration is the most resistant to DHC. with the lower initial hydrogen concentration, TSS temperature for the precipitation or hydride decreases and the crack growth during cooldown reduces.

• Wind and Structures
• /
• v.17 no.1
• /
• pp.43-68
• /
• 2013

The fluctuating wind induced vibration is one of the most important factors which has been taken into account in the design of long-span bridge due to the low stiffness and low natural frequency. Field measurement characteristics of sustained wind on structure site can provide accurate wind load parameters for wind field simulation and structural wind resistance design. As a suspension bridge with 1490 m main span, the Runyang Suspension Bridge (RSB) has high sensitivity to fluctuating wind. The simultaneous and continuously wind environment field measurement both in mid-span and on tower top is executed from 2005 up to now by the structural health monitoring system installed on this bridge. Based on the recorded data, the wind characteristic parameters, including mean wind speed, wind direction, the turbulence intensity, the gust factors, the turbulence integral length, power spectrum and spatial correlation, are analyzed in detail and the coherence functions of those parameters are evaluated using statistical method in this paper. The results indicate that, the turbulence component of sustain wind is larger than extremely strong winds although its mean wind speed is smaller; the correlation between turbulence parameters is obvious; the power spectrum is special and not accord with the Simiu spectrum and von Karman spectrum. Results obtained in this study can be used to evaluate the long term reliability of the Runyang Suspension Bridge and provide reference values for wind resistant design of other structures in this region.

• Proceedings of the SCSK Conference
• /
• 2003.09b
• /
• pp.370-378
• /
• 2003

MFD (Make up Film Deterioration) is a gradual deterioration of applied make up and is a common problem experienced by most foundation users. Our investigation revealed that for 64% of all make up users MFD is their greatest consern is using foundations. Known that the primary cause of MFD is sebum secretion. We observed that the length of time prior to onset of MFD in people who produce high level of sebum varies significantly from person to person. This suggests that other factors besides quantity of sebum production can affect MFD. Control over this factor would, we believe, be key to developing longer-lasting makeups. We studied the relationship between MFD and skin surface conditions. Our study revealed that furrows on the skin surface affect MFD significantly. Sebum reaches the skin surface from sebaceous glands and flows along furrow on the skin. If there are many deep furrows, it takes longer for sebum to overflow. But if the furrows are few or shallow, sebum quickly overflows and spreads over the skin surface where it can degrade the make up film. Therefore even when the volume of sebum produced is the same, the rate of MFD will be different depending on the number and shape of the furrows. A longer-lasting foundation could be produced by matching personal skin condition, but this would be very difficult because individual variations in texture are very large. Therefore we approached the problem by attempting to impose sebum resistance in under make up and foundation. We have developed two new materials and make up products based on our theory. A new fluoroalkyl acrylate-methacrylates copolymer designed for incorporation in under make up is extremely sebum resistant and sweat proof. Another new acrylate polymer designed for inclusion in foundation absorbs sebum and changes to a solid. Usage tests confirm it is possible to reduce MFD by using under make up and foundation which incorporate our new materials to cover where skin furrows are few or shallow

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.529-535
• /
• 2017

In this paper the laminate design parameters are researched to maximize the performance index of a composite pressure vessel. The pressure-resistant performance and the light-weight concept with contained internal space are implied in the performance index. To maximize the performance index, the three design variables that the thickness of each of helical and hoop layers and the length of hoop layer are considered under the assumption of fixed internal space. To optimize the variables, the response surface method is introduced for construction of the surrogate model and the ANOVA(analysis of variance) is performed to evaluate the effects of the variables. The optimization problem is formulated to maximize performance index under the burst pressure constraint. To verify the effectiveness of the research, numerical analyses are performed for the optimum model.