• The korean journal of orthodontics
• /
• v.41 no.6
• /
• pp.399-410
• /
• 2011

Objective: The purpose of this study was to evaluate the difference in frictional resistance among metal, ceramic, self-ligation brackets and coated or non-coated Ni-Ti archwires at various bracket-archwire angulations during the sliding movement of an orthodontic archwire, using an orthodontic sliding simulation device. Methods: Four types of bracket (Micro-arch Perpect Clear2 Clippy-C and Damon3 and 5 types of orthodontic archwire (0.014", 0.016", and 0.016" ${\times}$ 0.022" inch coated Ni-Ti, and 0.016" and 0.016" ${\times}$ 0.022" inch Ni-Ti) were used. Further, the bracket- archwire angles were set at 4 different angulations: $0^{\circ}$, $3^{\circ}$, $6^{\circ}$, and $9^{\circ}$. Results: The frictions from all the experimental groups were found to be significantly increased in order of self-ligation brackets, Micro-arch and Perpect Clear2 ($p$ < 0.001). The presence of a coat had no effect on the friction of the same sized archwires at $0^{\circ}$ and $3^{\circ}$ bracket-archwire angles ($p$ < 0.001). Coated archwires had significantly higher frictions than the same sized non-coated archwires at $6^{\circ}$ and $9^{\circ}$ bracket-archwire angles ($p$ < 0.001). The frictions increased significantly as the bracket-archwire angles were increased ($p$ < 0.001). Conclusions: The use of self-ligation brackets will be beneficial in clinical situations where a low frictional force is required. Further, in cases where crowding is not severe, the use of coated archwires should not cause problems. However, more additional explanation is required considering the fact that the damage of coated archwire and exposure of the metal portion in case of binding and notching and the effects of saliva were not taken into account.

• Journal of Korean Society of Forest Science
• /
• v.60 no.1
• /
• pp.51-57
• /
• 1983

Properties and glue shear strength of each water soluble rues-phenol copolymer adhesive and phenolic resin adhesive were examined as a high temperature curing binder through the manufacture of plywood made of Kapur veneer. The former has different molar ratio and the latter was made from different catalyst method. The results are summarized as follows: 1) Specific gravities of air dried plywood manufactured from each adhesive ranged from 0.67 to 0.82 and their moisture contents met the K.S. standard 2) In dry and wet shear strength, adhesives with 60 percent of non volatile content showed higher values than those with 50 percent except phenolic resin. Urea-phenol copolymer resin with 20 percent of phenol content exhibited the highest, and that with 70 percent the lowest. Filling effect of wood flour on the bonding strength is great in urea-phenol copolymer resin with more than 50 percent of phenol content, especially significant in 50 percent of non volatile content including alkali catalyst phenolic resin. Alkali and acid catalyst methods were the highest among the adhesive manufacture methods. In wet strength, urea resin belongs to the lowest group. 3) In glue shear strength after boiling and drying test, no method for manufacturing phenolic formaldehyde resin adhesive was stronger than alkali and acid catalyst methods. Phenolic resin made from alkali catalyst method needs a wood flour filler to improve the bonding quality. Urea-phenol copolymer resin with 10 percent of phenol content showed the reasonable water resistance.

• Journal of the Korean Applied Science and Technology
• /
• v.37 no.1
• /
• pp.91-101
• /
• 2020

The purpose of this study was to investigate the influence of obesity on the expression of autophagy-related proteins in cardiac muscle. To this end, obesity was induced in rats through 20 weeks of high-fat diet, and the animals were then subjected to 8 weeks of treadmill exercise. Subsequently, the expression of proteins that regulate the induction of autophagy, formation of autophagosome, and fusion of autophagosome and lysosome was confirmed. Obesity was induced in the experimental animals (SD rats) through 20 weeks of high-fat diet (carbohydrate: 20%, fat: 60%, and protein: 20%), and they were subsequently subjected to 8 weeks of treadmill exercise (5 days/week, 30 min/day, 5 minutes; 8m/min, 5 minutes; 11m/min, 20 minutes; 14m/min). The experimental groups comprised the normal diet control group (ND-CON, n=10), high-fat diet comparison group (HFD-CON, n=10), and high-fat exercise group (HFD-TE, n=10). Oral glucose tolerance test was conducted before and after 8 weeks of treadmill exercise, and the area under the curve (AUC) was calculated. Through fasting insulin and fasting glucose levels, HOMA-IR, which is an index of insulin resistance, and abdominal visceral fat/body weight (AVF/BW) were calculated for comparison. Moreover, autophagy-related proteins were analyzed from cardiac tissue to investigate the effects of exercise training. Obesity was successfully induced in the HFD-CON group through long-term high-fat diet, and the HFD-CON group had higher body weight, AUC, HOMA-IR, and AVF/BW compared to the ND-CON group. The HFD-TE group, which underwent 8 weeks of treadmill exercise, showed improvements in AUC, HOMA-IR, and AVF/BW. Although the body weight tended to decrease as well, there was no statistically significant difference. mTOR and AMPK, which are involved in the induction of autophagy, both decreased in obesity but increased upon exercise. Beclin-1, BNIP3, ATG-7, p62, and LC3, which are related to the formation of autophagosomes, all increased in obesity and decreased after exercise. Cathepsin L and LAMP2, which regulate the fusion of autophagosome and lysosome, both decreased in obesity and increased upon exercise. Physical activity, including treadmill exercise, was found to induce normal autophagy and improve pathological phenomena observed in metabolic diseases. Therefore, the findings suggest the need to consider treadmill exercise as a primary means to achieve effective prevention and treatment of cardiac diseases.

• Journal of Yeungnam Medical Science
• /
• v.25 no.1
• /
• pp.31-40
• /
• 2008

Background/Aims : Entecavir is a synthetic nucleoside analogue, cyclopentyl guanine nucleoside, which has a potent antiviral effect and the least viral breakthrough in hepatitis B virus (HBV) replication. Entecavir has been available in Korea since 2007 but there are few reports on its effects. The aim of this study was to evaluate the virological response (VR) and biochemical response (BR) to entecavir in HBV patients at 3, 6 and 9 months after treatment with entecavir. Materials and Methods : Thirty-three chronic hepatitis B patients who took entecavir for at least 9 months were enrolled. We investigated VR and BR by retrospectively reviewing medical records. Patients who satisfied the following criteria were chosen: 1) initial alanine aminotransferase (ALT) levels = 1.5upper limit of normal (ULN) and 2) initial HBV DNA levels = $5\;log_{10}\;copies/ml$. We measured ALT levels every 3 months until month 9. HBV DNA was measured every 2 or 3 months by polymerase chain reaction (PCR) method. Results : Most patients taking entecavir showed good BR (ALT < 40 IU/L). The BR rates were 61%, 73% and 67% at months 3, 6 and 9, respectively. VR (HBV DNA < $5\;log_{10}\;copies/ml$ or 2 log lower than initial HBV DNA) rates were 82%, 91% and 91% at months 3, 6 and 9, respectively. Undetectable HBV DNA (HBV DNA < 4 log10 copies/ml) rates were 49%, 73% and 85% at months 3, 6 and 9, respectively. Two patients presented with virological breakthrough without adverse effects until month 9. Conclusions : Entecavir showed good BR and VR from month 3 and these effects continued through the 9-month observation period. This suggests that entecavir is also a good choice for the first line treatment of chronic hepatitis B (CHB). Further studies are needed to determine the long-term efficacy and drug resistance of entecavir in Korean CHB patients.

• Tunnel and Underground Space
• /
• v.30 no.3
• /
• pp.256-269
• /
• 2020

The objective of this study is to evaluate the stress thresholds in crack development and the corrected fracture toughness of KURT granite under dry and saturated conditions. The stress thresholds were identified by calculation of inelastic volumetric strain from an uniaxial compression test. The corrected fracture toughness was estimated by using the Level II method (Chevron Bend specimen), suggested by ISRM (1988), in which non-linear behaviors of rock was taken into account. Average crack initiation stress(σ_ci) and crack damage stress(σ_cd) under a dry condition were 91.1 MPa and 128.7 MPa. While, average crack initiation stress(σ_ci) and crack damage stress(σ_cd) under a saturated condition were 58.2 MPa and 68.2 MPa. The crack initiation stress and crack damage stress of saturated ones decreased 36% and 47% respectively compared to those of dry specimens. A decrease in crack damage stress is relatively larger than that of crack initiation stress under a saturated condition. This indicates that the unstable crack growth can be more easily generated because of the saturation effect of water compared to the dry condition. The average corrected fracture toughness of KURT granite was 0.811 MPa·m^0.5. While, the fracture toughness of saturated KURT granite(K_CB) was 0.620 MPa·m^0.5. The corrected fracture toughness of rock in saturated condition decreases by 23.5% compared to that in dry condition. It is found that the resistance to crack propagation decreases under the saturated geological condition.

• Journal of fish pathology
• /
• v.18 no.1
• /
• pp.19-28
• /
• 2005

Scuticociliatosis has badly settled one of most damaging diseases during the seedling production process of olive flounder. Paralichthys olivaceus in Korea. We isolated a new type of Scuticociliate from flounder. The parasite metamorphoses to ciliate and cyst phases with each other by environmental changes and survive for a relatively long span. The ciliate was measured average 41.8 ${\mu}m$ in length and 21.0 ${\mu}m$ in width, and cyst was 17.0 ${\mu}m$ and 13.5 ${\mu}m$, respectively. Nutritional condition was determined as a major parameter of metamorphosing between ciliate and cyst stages. The ciliate transforms to a cyst stage because of food shortage, and the cyst returns to a ciliate stage with a favorite environmental condition and shows active growth and reproduction. The ciliate multiplied at the maximal density of $2.9 {\times} 10^5 {m\ell}^{-1}$cells in vitro cultivation at $15 ^{\circ}C$temperature using MS BHI medium and bacterial food sources. The ciliate could be proliferated at a 2.5 to $30 ^ \circ}C$ temperature range, pH 6 to 9, and 1 to 55 ppt salinity. Particularly, it survived over one week at $0 ^{\circ}C$temperature showing a high resistance against unfavorable environmental conditions. And the cyst survived for 320 days in the condition of $5 ^{\circ}C$with no feeding, but its survival period was markedly shortened in higher temperature conditions. The chemotherapeutants (formalin and hydrogen peroxide) were clarified as effective chemicals against the ciliate during in vitro trials, but the effect of therapeutants differed in proportion, depending upon the density and the bathing time of chemical compounds.

• Journal of Life Science
• /
• v.20 no.1
• /
• pp.103-112
• /
• 2010

Pemetrexed has demonstrated clinical activity in non-small cell lung cancer (NSCLC) as well as other solid tumors. It transports into the cells via reduced folate carrier (RFC) and is polyglutamated by folypolyglutamate synthetase (FPGS). Pemetrexed directly inhibits several folate-dependent enzymes such as thymidylate synthase (TS), dihydrofolate reductase (DHFR), and glycinamide ribonucleotide formyltransferase (GARFT). We investigated the effects of genetic variations and the expression of RFC, FPGS, TS and DHFR enzymes on drug sensitivity to pemetrexed in NSCLC cells. Polymorphisms in RFC, FPGS, and DHFR were genotyped in four NSCLC cells - A549, PC14, HCC-1588, and H226. Real-time RT-PCR and Western blot was performed to evaluate mRNA transcripts and protein of these genes. The cytotoxicity of pemetrexed was measured by SRB assay. In PC14 and H226 cells, increased mRNA expressions of RFC and FPGS were associated with higher cytotoxicity to pemetrexed. 2R/2R genotype of TS and its increased mRNA expression were associated with drug resistance to pemetrexed in A549 cells, whereas 3R/3R genotype in TS with decreased mRNA expression was associated with higher sensitivity in H226 cells. After pemetrexed treatment, an inverse change of DHFR mRNA and protein expression was found. The strongest linkage disequilibrium (LD) was discovered between-1726C>T and -1188A>C SNP of DHFR gene. Our findings suggest the cytotoxic effect of pemetrexed may be associated with genetic polymorphisms and the expression level of genes involved in pemetrexed metabolisms in NSCLC cells.

• Tuberculosis and Respiratory Diseases
• /
• v.43 no.5
• /
• pp.693-700
• /
• 1996

Background : Antituberculous therapy is set a short-term therpy used isoniazid(INH), rifampin(RFP), ethambutol(EMB), pyrazinamide(PZA) from 1970s' and treatment rate has been very improved. But drug interruption or irregular medication due to side effects and resistance of drug are serious problem to retreatment cases, specially. Ofloxasine(OFX), developed from Quinolone at 1980's is effective not only other respiratory infectious disease but also pulmonary tube rculosis. And this is useful drug instead of injection agents for retreatment patients who have side effects to other drugs, lived far distance from medical clinics. So, we will evaluate theffectiveness as four oral drugs involving OFX. Method : A retrospective study was made through the regular follow up of smear positive cases,who treated by four drug, namely, prothionamide (PTA) cycloserine(CS), OFX, paraminosalicylic acid(pAS). Results: 1) Out of 66case with positive sputum AFB smear, 42(64%)cases achieved the negative conversion. 2) Considering the negative conversion in all group, 34 case (52%) of sputum conversion occured within first 6 months, on the extent of diease was minimal, moderate, far advanced pulmonary tuberculosis, sputum AFB smear negative response to treatment was 100%, 78%, 46% respectively. 3) The roentgenological improvement occured in 38(58%), extent of diease was minimal, moderately, far advanced pulmonary tuberculosis, Roentgenological improvement to retreatment was 75%, 64%, 46%. 4) When the drnation of patients illness was less than 1 year, 1 to 3 years, 3 10 5 years and more than 5 years, sputum AFB smear negative response to retreatment was 100%, 88%, 80%, 52 %. 5) On side effects, major problems are gastrointestinal troubles, mild liver function abnormality, psychotic problemes, and skin problem(urticaria, itching sensation). Conclusion : The duration & extents of patients illness was shorter & minimal, sputum AFB smear negative response rate was better. Radiologic response is better as shorter duration and minimal extent of diease. But, as diease is longer duration & far advanced, sputum negative conversion & Roentgenological improvement is poor and limited. The adverse reaction was mainly observed gastrointestinal troubles(indigestion, abdominal pain, nausea, vomiting, diarrhea) and are well controled by symptomatic management in most patients, as regard to tolerance to the secondary drugs.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.22 no.7
• /
• pp.492-507
• /
• 2010

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2009. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) Research trends of thermal and fluid engineering have been surveyed as groups of general thermal and fluid flow, fluid machinery and piping, and new and renewable energy. Various topics were covered in the field of general thermal and fluid flow such as an expander, a capillary tube, the flow of micro-channel water blocks, the friction and anti-wear characteristics of nano oils with mixtures of refrigerant oils, etc. Research issues mainly focused on the design of micro-pumps and fans, the heat resistance reliability of axial smoke exhaust fans, and hood systems in the field of fluid machinery and piping. Studies on ground water sources were executed concerning two well type geothermal heat pumps and multi-heat pumps in the field of new and renewable energy. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics and industrial heat exchangers. Researches on heat transfer characteristics included the heat transfer in thermoelectric cooling systems, refrigerants, evaporators, dryers, desiccant rotors. In the area of industrial heat exchangers, researches on high temperature ceramic heat exchangers, plate heat exchangers, frosting on fins of heat exchangers were performed. (3) In the field of refrigeration, papers were presented on alternative refrigerants, system improvements, and the utilization of various energy sources. Refrigeration systems with alternative refrigerants such as hydrocarbons, mixed refrigerants, and $CO_2$ were studied. Efforts to improve the performance of refrigeration systems were made applying various ideas of suction line heat exchangers, subcooling bypass lines and gas injection systems. Studies on heat pump systems using unutilized energy sources such as river water, underground water, and waste heat were also reported. (4) Research trend in the field of mechanical building facilities has been found to be mainly focused on field applications rather than performance improvements. In the area of cogeneration systems, papers on energy and economic analysis, LCC analysis and cost estimating were reported. Studies on ventilation and heat recovery systems introduced the effect on fire and smoke control, and energy reduction. Papers on district cooling and heating systems dealt with design capacity evaluation, application plan and field application. Also, the maintenance and management of building service equipments were presented for HVAC systems. (5) In the field of architectural environment, various studies were carried to improve indoor air quality and to analyze the heat load characteristics of buildings by energy simulation. These studies helped to understand the physics related to building load characteristics and to improve the quality of architectural environment where human beings reside in.

• Weed & Turfgrass Science
• /
• v.4 no.4
• /
• pp.376-382
• /
• 2015

Dollar spot, caused by Sclerotinia homoeocarpa, is the major disease in cool-season turfgrasses. Understanding the distribution of this pathogen in soil and thatch is important to developing disease control strategies. In this study, toothpicks were used to detect S. homoeocarpa in the turfgrass canopy, thatch, and soil at different distances from dollar spot infection centers. The effect of penetrant and contact fungicide applications with different water volumes on distribution of S. homoeocarpa was also investigated. S. homoeocarpa was detected in 100% of samples taken from the leaf canopy, 83.3% in thatch area, and 0% in the soil from within the infection center. S. homoeocarpa was isolated in 100% of samples taken from the edge of the infection center, but was only detected in 13% of the samples taken at 1.5 cm away from the infection center edge. S. homoeocarpa was isolated at a higher frequency in the propiconazole treated plots than those treated with chlorothalonil and was not detected in leaf canopy samples when either fungicides was applied with 6.78 L of water. In conclusion, the toothpick-aided detection technique has improved our understanding of S. homoeocarpa epidemiology and could be used as a diagnostic tool to detect for fungicide resistance on golf courses.