• Journal of the Korea Concrete Institute
• /
• v.18 no.6 s.96
• /
• pp.801-809
• /
• 2006

Epoxy resin has widely been used as adhesives and corrosion-resistant paints in the construction industry for many years, since it has desirable properties such as high adhesion and chemical resistance. Until now, in the production of conventional epoxy cement mortars, the use of any hardener has been considered indispensable for the hardening of the epoxy resin. However we have noticed the fact that even without any hardener, the hardening process of the epoxy resin can proceed by the action of hydroxides in cement mortars. As a result the disadvantages of the two-component mixing of the epoxy resin and hardener have been overcome. The purpose of this study is to evaluate the mechanical properties and durability of epoxy cement mortar without a hardener exposed at indoor and outdoor for one year. The epoxy cement mortars without and with a hardener were prepared with various polymer-cement ratios, and tested for weight change, flexural and compressive strengths, water absorption, carbonation depth and pore size distribution. Especially, the basic properties of the epoxy cement mortars without hardener are discussed in comparison with ones with the hardener. From the test results, it is concluded thai the epoxy cement mortars without a hardener exposed at indoor and outdoor for one year have higher strength and better durability than ones with the hardener within the polymer-cement ratios of 10 to 20%.

• Korean Journal of Materials Research
• /
• v.9 no.9
• /
• pp.919-925
• /
• 1999

Grain boundary characteristics and corrosion behavior of Alloy 600 material were investigated using the concept of grain boundary control by thermomechanical treatment(TMT). The grain boundary character distribution (GBCD) was analyzed by electron backscattered diffraction pattern. The effects of GBeD variation on intergranular at tack(JGA) and primary water stress corrosion cracking(PWSeC) were also evaluated. Changes in the fraction of coinci dence site lattice(CSL) boundaries in each cycle of TMT process were not distinguishable, but the total eSL boundary frequencies for TMT specimens increased about 10% compared with those of the commercial Alloy 600 material. It was found from IGA tests that the resistance to IGA was improved by TMT process. However, it was found from PWSCC test that repeating of TMT cycles resulted in the gradual decrease of the time to failure and the maximum load due to change in grain boundary characteristics, while the average crack propagation rate of primary crack increased mainly due to suppression of secondary crack propagation. It is considered that these corrosion characteristics in TMT specimens is attributed to 'fine tuning of grain boundary' mechanism.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.19 no.2
• /
• pp.249-263
• /
• 2017

The expansion behavior of inflatable steel pipe rockbolt shows geometric nonlinearity due to its ${\Omega}-shaped$ section. Previous studies on the anchoring behavior of inflatable steel pipe rockbolt were mainly performed using theoretical method. However, those studies oversimplified the actual behavior by assuming isotropic expansion of inflatable steel pipe rockbolt. In this study, the anchoring behavior of the inflatable steel pipe rockbolt were investigated by the numerical method considering the irregularity of pipe expansion and other influencing factors. The expansion of inflatable steel pipe rockbolt, the contact stress distribution and the change of the average contact stress and the contact area during installation were analyzed. The contact stresses were developed differently depending on the constitutive behavior of rocks. Small contact stresses occurred in steel pipes installed in elasto-plastic rock compared to steel pipes installed in elastic rock. Also, the anchoring behaviors of the inflatable steel pipe rockbolt were different according to the stiffness of the rock. The steel pipe was completely unfolded in the case of the stiffness smaller than 0.5 GPa, but it was not fully unfolded in the case of the stiffness larger than 0.5 GPa for the given analysis condition. When the steel pipe is completely unfolded, the contact stress increases as the rock stiffness increases. However, the contact stress decreases as the rock stiffness increases when the steel pipe is not fully expanded.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.39 no.2
• /
• pp.307-316
• /
• 2019

Development of vegetation in stream channel increases resistance to flow, resulting in increase in river stage upon flood and affecting change in stage-discharge relationship. Vegetation revealed in stream by water level reaching a peak and then declined upon flood is mostly found as prone. Taking an account of flow distribution with the number of vegetation, prone vegetation layer might be at height where discharge rate is zero (0) (Stephan and Guthnecht, 2002). However, there is a tendency that flow rate is overestimated when applying the height of river bed to flow area with no consideration of the height of vegetation layer in flow rate by float measurement. In this study, reliable flow measurement in stream with vegetation was calculated by measuring the height of vegetation layer after flood and excluding the vegetation layer-projected area from the flow area. The result showed the minimum 4.34 % to maximum 10.82 % of flow deviation depending on the scale of discharge. Accordingly, reliable velocity-area methods would be determined if vegetation layer-projected area in stream is considered in flow rate estimation using the flow area during the flood.

• Korean Journal of Environment and Ecology
• /
• v.37 no.1
• /
• pp.1-12
• /
• 2023

We analyzed the distribution area of debris slopes in Mudeungsan (Mt. Mudeung) National Park by comparing aerial photos of the past (1966) and the present (2017) and identified the vegetation characteristics that affect the change in the area of the debris slopes by investigating the vegetation status of the debris slopes and the surrounding areas. The area of debris slopes in Mt. Mudeung appears to have been reduced to a quarter of what it used to be. Debris slopes here have decreased at an average rate of 2.3 ha/yr over 51 years by vegetation covers. Notably, most of the small-area debris slopes in the low-inclination slopes disappeared due to active vegetation coverage. However, there are still west-facing, south-west-facing, south-facing, and large-area debris slopes remaining because the sun's radiant heat rapidly raises the surface temperature of rock blocks and dries moisture, making tree growth unfavorable. Because of these locational characteristics, the small-scale vegetation in the middle of Deoksan Stony Slope, which is the broadest area, showed distinct characteristics from the adjacent forest areas. Sunny places and tree species with excellent drying resistance were observed frequently in Deoksan Stony Slope. However, tree species with high hygropreference that grow well in valleys with good soil conditions also prevailed. In some of these places, the soil layer has been well developed due to the accumulation of fine materials and organic matter between the crevices of the rock blocks, which is likely to have provided favorable conditions for such tree species to settle and grow. At the top of Mt. Mudeung, on the other hand, the forest covered the debris slopes, where Mongolian oaks (Quercus mongolica) and royal azaleas (Rhododendron schlippenbachii), which typically grow in the highlands, prevailed. This area was considered favorable for the development of vegetation for the highlands because the density of rock blocks was lower than in Deoksan Stony Slope, and the soil was exposed. Moreover, ash trees (Fraxinus rhynchophylla) and Korean maple trees (Acer pseudosieboldianum) that commonly appear in the valley areas were dominant here. It is probably due to the increased moisture content in the soil, which resulted from creating a depressive landform with a concave shape that is easy to collect rainwater as rock blocks in some areas fell and piled up in the lower region. In conclusion, the area, density of the rock blocks, and distribution pattern of rock block slopes would have affected the vegetation development and species composition in the debris slope landform.

• Korean Journal of Ecology and Environment
• /
• v.51 no.4
• /
• pp.331-344
• /
• 2018

Lotic organisms in streams are affected by natural and anthropogenic disturbances such as increase of heavy rainfall event caused by climate change and flow regime change caused by weir constructions. Based on domestic and foreign literature, 157 Korean benthic macroinvertebrate taxa were selected species as potential lotic candidates. Three shoreline sites (total 54 samples) were surveyed consecutively before ('08~'09), during ('10~'12) and after ('13~'16) the construction of the weirs (Gangcheon, Yeoju and Ipo weir) in the Namhan-River for tracing changes of lotic communities. As a result, water flow of the Ipo-wier and water quality variables such as T-N, T-P, BOD5, etc. of the weir section revealed no significant changes. Physical habitat conditions such as the flow velocity and streambed substrate evidently changed. Particulary, flow velocity measured at sampling points along with each microhabitat drastically decreased and particle size of streambed substrate steadily decreased after weir constructions. Lotic organisms also decreased after construction, especially Hydropsychidae (insecta: Trichoptera) acutely decreased from $3,526ind.\;m^{-2}$ to $2ind.\;m^{-2}$ As a result of CCA, lotic species such as Hydropsyche valvata, Hydropsyche kozhantschikovi, Cheumatopsyche brevilineata, Cheumatopsyche KUa, Macrostemum radiatum, etc. correlated with the flow velocity, streambed substrate. Therefore, the decrease of the flow velocity and substrate size after weir construction seemed to be closely related to the decrease of the individual abundances of the lotic organisms independently of water quality. In order to evaluate the influence of the ecosystem on the flow regime change more accurately, it is necessary to study the indicator species based on the resistance or preference of the flow.

• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 2000.09a
• /
• pp.201-210
• /
• 2000

Rock bridge in rock masses can be considered as one of several types of opening-mode fractures, and also it has been known to have a great influence on the stability of structures in rock mats. In the beginning of researching a rock bridge it used to be studied only in characteristics of its behavior, as considering resistance of material itself. However the distribution pattern of rock bridges, which can affect the stability of rock structures, is currently researched with a fracture mechanical approach in numerical studies. For investigating the effect of rock bridges on the development pattern of hydraulic fractures, the author analyzed numerically the stress state transition in rock bridges and their phenomena with a different pattern of the rock bridge distributons. From the numerical studies, a two-crack configuration could be defined to be representative of the most critical conditions for rock bridges, only when cracks are systematic and same in their length and angle. Moreover, coalescence stresses and onset of propagation stresses could be known to increase with decreasing s/L ratio or increasing d/L ratio. The effect of pre-existing crack on hydraulic fracturing was studied also in numerical models. Different to the simple hydraulic fracturing modeling in which the fractures propagated exactly parallel to the maximum remote stress, the hydraulic fractures with pre-existing cracks dial not propagate parallel to the maximum remote stress direction. These are representative of the tendency to change the hydraulic fractures direction because of the existence of pre-existing crack. Therefore s/L, d/L ratios will be identical as a function effective on hydraulic fractures propagation, that is, the $K_{I}$ vague increase with decreasing s/L ratio or increasing d/L ratio and its magnification from onset to propagation increases with decreasing s/L ratio. The scanline is a commonly used method to estimate the fracture distribution on outcrops. The data obtained from the scanline method can be applied to the evaluation of stress field in rock mass.s.

• Tunnel and Underground Space
• /
• v.10 no.3
• /
• pp.447-456
• /
• 2000

Rock bridge in rock masses can be considered as one of several types of opening-mode fractures, and also it has been known to have a great influence on the stability of structures in rock mass. In the beginning of researching a rock bridge it used to be studied only in characteristics of its behavior, as considering resistance of material itself. However the distribution pattern of rock bridges, which can affect the stability of rock structures, is currently researched with a fracture mechanical approach in numerical studies. For investigating the effect of rock bridges on the development pattern of hydraulic fractures, the author analyzed numerically the stress state transition in rock bridges and their phenomena with a different pattern of the rock bridge distributions. From the numerical studies, a two-crack configuration could be defined to be representative of the most critical conditions for rock bridges, only when cracks are systematic and same in their length and angle. Moreover, coalescence stresses and onset of propagation stresses could be known to increase with decreasing s/L ratio or increasing d/L ratio. The effect of pre-existing crack on hydraulic fracturing was studied also in numerical models. Different to the simple hydraulic fracturing modeling in which the fractures propagated exactly parallel to the maximum remote stress, the hydraulic fractures with pre-existing cracks did not propagate parallel to the maximum remote stress direction. These are representative of the tendency to change the hydraulic fractures direction because of the existence of pre-existing crack. Therefore s/L, d/L ratios will be identical as a function effective on hydraulic fractures propagation, that is, the K$_1$ value increase with decreasing s/L ratio or increasing d/L ratio and its magnification from onset to propagation increases with decreasing s/L ratio. The scanline is a commonly used method to estimate the fracture distribution on outcrops. The data obtained from the scanline method can be applied to the evaluation of stress field in rock mass.

• Pediatric Infection and Vaccine
• /
• v.13 no.2
• /
• pp.115-123
• /
• 2006

Purpose : We investigated whether there had been any change in the epidemiology of Streptococcus pneumoniae in Korea before and after introduction of heptavalent pneumococcal conjugate vaccine(PCV7). Methods : Between September 2001 and August 2006, clinical isolates were collected from patients with pneumococcal infection in Severance Hospital, Seoul, Korea. We analyzed trends in serotype distribution and antibiotic resistance before and after the introduction of PCV7. Results : There were 363 strains of Streptococcus pneumoniae isolated from clinical specimens; 143 before and 220 after PCV7 introduction. The predominant serotypes, in order of decreasing frequency, were 19F, 19A, 23F, 6B, 6A, 3, 9V, 14, 11A, 4, 29, and 18C; 152 isolates(41.9%) belonged to types included in PCV7. The proportion of clinical isolates that were nonsusceptible to penicillin increased from 58.8% in 2001 to 83.6% in 2006(P=0.046). There was no significant diminution in pneumococcal infection caused by vaccine serotypes after the introduction of PCV7. In children younger than age 2 years, the proportion of clinical isolates that were vaccine serotypes was higher than in persons older than age 15 years (59.3% vs 37.8%, P=0.004). Conclusions : There was no significant diminution in pneumococcal infection caused by vaccine serotypes after the introduction of PCV7, therefore more universal pneumococcal immunization program is recommended especially for children younger than age 2 years.

• Management & Information Systems Review
• /
• v.16
• /
• pp.59-76
• /
• 2005

The inner and outer environment surrounding companies becomes more insecure and unpredictable due to sudden changes. Because the change of environment surrounding companies can deeply affect the existence of companies, continuous innovation of organization is required to develope management ability. Also, to conquer insecure present and future of companies effectively, organizations of companies have voluntarily coped with insecurities and intense competitions through endless organization innovation. Externally, globalization, openness, and relaxed regulation intensify competitions; consumers' requests get varied; consciousness of members of organizations have changed. Due to those factors, companies are placed in a situation that they should practice endless inner innovation. Internally, competitive power has weakened due to decline in productivity and inefficiency of indirect parts of company has increased. From those factors, managers increasingly request inner innovation and pursue organization innovation for the purpose of effective usage of extra resources and being prepared for the future. The managers who operate organization innovation think that systematized approach to organization innovation is the most practical, and actually operate the thought. However, the negative side of the thought is not neglectable. To minimize inner and outer resistance and to operate organization innovation successfully, some innovation strategies that properly reflect several issues related to organization innovation should be prepared. Another words, organization innovation should be operated differently by cases that if it focuses on personal perspective or on organization's. For many cases of our country, several techniques of organization innovation have been adopted in a short time and operated without making its original use. Therefore, this study looks into major Issues that should be considered for more successful operation of organization innovation, from both personal aspect and organizational aspect. When considering such aspects and operate organization innovation, there is more possibility to succeed on organization innovation. Now, Korean companies have overcame trial period and reborn as global companies. Take warnings by the ordeal under IMF administration, this is time to secure international competitive power by using developed innovation techniques and transform to superior company. Managers need to recognize that to try successful organization innovation is the shortcut to reborn as competitive company, and should take a continuous and profound search for decisive factors to succeed on organization innovation. To operate successful organization innovation, first, at the step of planning organization. innovation, the company should understand the company's capability, position in market and relationship with competitors. Then, the company should establish a distinguished innovation strategy which is of the whole company's aspect, so that the company can freely choose various technique of organization innovation that suits for the company's capability and needs, and unfold the organization innovation movement. Establishing strategy in the aspect of the total company is very important because it offers clear focus of the purpose of adopt, priority and distribution of resources. Second, at the step of operating organization innovation, the company should define concrete purpose and method to evaluate the results that are expected to obtain by adopting organization innovation in advance. While pushing forward, the company should set proper time of examination(milestone) and inspect if expected results are shown. Third, at the step of afterward management of operating organization innovation, the company requires a thorough afterwards verification if targeted results are obtained and of confirmation of successful or failure factors. Also, the company should cultivate specialists in the company who can accumulate and continuously spread the know-how learned during organization innovation promotion, so the know-how don't remain only in certain departments or to a few people in charge. The company should also give effort to maintain the accumulated innovation techniques to be continued.