• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2009년 추계학술대회논문집
• /
• pp.77-83
• /
• 2009

In this study, we conducted resistance and propulsion performance test of ship composed of the Resistance Test, Propeller Open Water Test and Self Propulsion Test using the CFD(Computational Fluid Dynamics). We used commercial RANS(Reynolds Averaged Navier Stokes equation) solver, as a calculating tool. The unstructured grids were used in a bow and stern of ship, having complex shape, for a convenience of generating grids, and the structured grids were adopted in a central hull and rest of hull having a relatively simple shape which is called hybrid grid method. In addition, The sliding mesh method was adopted to rotate a propeller directly in the Propeller Open Water and Self Propulsion Test. The Resistance Test and Self Propulsion Test were calculated using Volume of Fluid (VOF) model and considering a free surface. And all The three cases were applied realizable k-epsilon model as the turbulence model. The results of calculations were verified for the suitability of calculations by comparing MOERI's EFD results.

• 한국전산유체공학회지
• /
• 제15권1호
• /
• pp.81-87
• /
• 2010

In this study, we conducted resistance and propulsion performance test of ship composed of the Resistance Test, Propeller Open Water Test and Self Propulsion Test using the CFD(Computational Fluid Dynamics). We used commercial RANS(Reynolds Averaged Navier Stokes equation) solver, as a calculating tool. The unstructured grids were used in a bow and stern of ship, having complex shape, for a convenience of generating grids, and the structured grids were adopted in a central hull and rest of hull having a relatively simple shape which is called hybrid grid method. In addition, The sliding mesh method was adopted to rotate a propeller directly in the Propeller Open Water and Self Propulsion Test. The Resistance Test and Self Propulsion Test were calculated using Volume of Fluid (VOF) model and considering a free surface. And all The three cases were applied realizable k-epsilon model as the turbulence model. The results of calculations were verified for the suitability of calculations by comparing MOERI's EFD results.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제2권3호
• /
• pp.139-145
• /
• 2010

In the present study, we conducted resistance test, propeller open water test and self-propulsion test for a ship's resistance and propulsion performance, using computational fluid dynamics techniques, where a Reynolds-averaged Navier-Stokes equations solver was employed. For convenience of mesh generation, unstructured meshes were used in the bow and stern region of a ship, where the hull shape is formed of delicate curved surfaces. On the other hand, structured meshes were generated for the middle part of the hull and the rest of the domain, i.e., the region of relatively simple geometry. To facilitate the rotating propeller for propeller open water test and self-propulsion test, a sliding mesh technique was adopted. Free-surface effects were included by employing the volume of fluid method for multi-phase flows. The computational results were validated by comparing with the existing experimental data.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2011년 춘계학술대회논문집
• /
• pp.187-193
• /
• 2011

In this report, We compared the actual test with the result of pow calculation and Resistance/Self-propulsion of the ship using STAR-CCM+ which is the commercial Reynolds Averaged Navier-Strokes(RANs) Solver. The calculation model was the KRISO Container Ship and 205K Bulk Carrier of Sungdong shipbuilding company. For this calculation, We used Realizable K-Epsilon model for flaw analysis, VOF method for the free surface creation, Moving Reference Frame method for reducing the POW calculation time, and Sliding Mesh method for Self-Propulsion analysis. Calculation of Resistance and Self-Propulsion includes the free-surface. And all calculations in this report were based on unstructured grids.

• 대한조선학회논문집
• /
• 제60권5호
• /
• pp.320-331
• /
• 2023

In this study, a model test was conducted using the soft-mooring technique to evaluate the added resistance of the ship in waves. The study also examined the specific factors that should be considered during the soft-mooring test. The main purpose of soft-mooring is to prevent drifting caused by waves by providing horizontal restoring forces. However, it can also create undesired restoring forces in the vertical direction. Therefore, we examined the restoring force of the ship's 6-DOF motion based on the arrangement of the soft-mooring and the height of the mooring connection point. We also checked the corresponding resonance period and drift distance. The soft-mooring test was conducted twice, once with self-propulsion and once without self-propulsion, allowing us to review the advantages and disadvantages of each test technique. The main parameters measured in these model tests were 6DOF motion and added resistance on the ship. We compared these measurements obtained from two different techniques (with and without self-propulsion). Additionally, we also compared the measurements based on the types of measuring sensors used (2D load cells on FP, AP, and 1D load cells on each mooring line) as well as the height of the mooring connection point.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2015년도 특별논문집
• /
• pp.41-45
• /
• 2015

In this study reviewed the validity of the estimated optimum trim by the numerical analysis. For this purpose, the numerical analysis of the trim optimization for 6500TEU container carrier and capesize bulk carrier were carried out using Star-CCM+, which results were compared with the results of model tests. The reliability of results of the numerical analysis was confirmed via comparing the resistance determined by the numerical analysis and model test. The performance of self-propulsion at each trim conditions were estimated using the calculated resistance by numerical analysis. The BHP at each trim condition were calculated by estimated performance of self-propulsion, which trend of results were confirmed similar trend of result of model test.

• 대한조선학회논문집
• /
• 제58권2호
• /
• pp.58-65
• /
• 2021

In order to study the self-propulsion test and analysis techniques for the submerged body in Large Cavitation Tunnel (LCT). DARPA Suboff, a submarine model publicly available was manufactured. The resistance results of DARPA Suboff was acquired from the LCT tests and compared with those of DTRC. After the wall blockage correction, the resistance results of LCT were in good agreement with those of DTRC. On the basis of the resistance results of LCT, the self-propulsion tests were conducted in LCT. The test objective was to get the full-scale propeller operating conditions for the propeller cavitation and noise tests. The test results of DARPA Suboff were analyzed in a way similar to the analysis techniques of those of the Towing Tank (TT). Another submerged body, for which self-propulsion tests were conducted in TT, was selected for results verification. The results of LCT were in good agreement with those of TT. On the basis of the present study, it is thought that the operating conditions for the full-scale submerged body can be drawn through LCT tests.

• 대한조선학회지
• /
• 제20권4호
• /
• pp.25-32
• /
• 1983

A series of model testes on a container ship in regular were executed. This paper presents the results of resistance, self-propulsion, and ship motion tests. The experimental results of ship motion measured on a towed model and a self-propelled model were compared with those of Japanese's model test showing fairly good agreements. The results of added resistance tests were compared with those of Japanese' model test and also compared with the calculation results by Gerritsma's method showing somewhat large discrepancies at higher speeds. Also the results of added resistance tests measured on a fixed model were compared with the calculation results by Gerritsma's method. Finally the results of self-propulsion tests were presented.

• 대한조선학회지
• /
• 제17권3호
• /
• pp.29-35
• /
• 1980

With installation of the computerized data acquisition system on the towing carriage of KRIS towing tank, the testing techniques of resistance test, propeller open-water test, self-propulsion test and wake survey at propeller disk were remarkably improved and automated. For the self-propulsion test a new method was developed with aid of a digital desk-top computer. This method is based on extracting advantages both from British method and Continental method, that is, the accuracy from the constant speed method and the effciency from the constant load method. The KRIS method has been successfully practized with the improved accuracy, stability and efficiency. Details of the new method are described in this paper.

• 한국해양공학회지
• /
• 제16권6호
• /
• pp.71-75
• /
• 2002

In this paper, a study on the principal performance of the purse seiner ship in two vessel formations was conducted. For this task, the outline of the purse seiner fishing system in two vessel formations was reviewed. At the same time, based on the general arrangement plan, hull from of the main vessel was developed. And the stability and ship motion characteristics of the ship design were estimated. Finally, to verify the characteristics of the resistance and self-propulsion coefficient, a model test in a circulating water channel was performed. As n result, it is anticipated that this presentation will be used as the foundation material for research of purse seiner.