• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표논문집(II)
• /
• pp.330-335
• /
• 1998

This research was conducted to evaluate the adhesion in tension of the polymer mortars for cement concrete repair. Various polymer types, binder ratios, and wet/dry conditions of the surface were considered in this study. Styrene-butadiene rubber (SBR) and ethylen vinyl acetate (EVA) used for polymer cement mortars. Epoxy resin (EP), and unsaturated polyester resin (UP) were used for polymer mertars. Adhesion in tension for the dry condition of the substrate surface was higher than that for the wet condition of the substrate surface under the same binder ratio. Therefore, in repairing concrete, the dry surface condition was effective on adhesion.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2000년도 춘계학술대회
• /
• pp.265-273
• /
• 2000

A study to analyze and solve problems of polyacetal resin cutting experiment has presented in this paper. We have taken Taguchi's parameter design approach, specifically orthogonal array, and determined the optimal levels of the selected variables through analysis of the experimental results using S/H ratio.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 추계학술대회 논문집
• /
• pp.669-670
• /
• 2009

• Restorative Dentistry and Endodontics
• /
• 제31권1호
• /
• pp.50-57
• /
• 2006

이 연구의 목적은 $ProTaper^{(R)}$ system을 사용하였을 때, 각 단계별로 근관 형성 결과를 분석 하는 것이다. 20개의 레진 블락을 근관 성형 방법에 따라, 엔진 구동형 $ProTaper^{(R)}$로 전체 근관을 성형한 군을 R군, 수동형 $ProTaper^{(R)}$로 전체 근관을 성형한 군을 M군으로 하였다. 근관의 술 전, 술 후 이미지를 각 파일 단계별로 스캔한 후, 중심이동률 산출을 위해 원래의 근관 이미지와 각 단계의 파일 사용후의 이미지를 각각 중첩하였고, 근관의 변위량 산출을 위해 각 단계의 파일 사용후의 이미지와 직전 파일 사용후의 이미지를 중첩하였다. 근단공으로부터의 수직거리 1 2, 3, 4그리고 5mm위치에서 중심이동률과 근관의 변위량을 측정하였다. 실험 결과 R군의 모든지점에서 각 단계별 중심이동률과 근관 변위량은 각각 유의한 차이가 없었다 (p<0.05). M군에서 1 mm를 제외한 모든 지점에서 각 단계별 중심 이동률과 근관 변위 량은 각각 유의한 차이가 없었다 (p<0.05). 그러나 M군의 1mm 지점에서 F2 file step은 통계학적으로 큰 중심 이동률과 근관 변위량을 보였다 (p<0.05). 본 연구의 결과에서 엔진 구동형 $ProTaper^{(R)}$ 사용 시에는 각 파일 단계별 근관 변위 정도에 유의한 차이가 없었으나, 수동형 ProTaper로 근관 성형을 하였을 때 , F2 file step에서 특히 근관 변위가 크게 나타났다.

• Journal of the Korean Wood Science and Technology
• /
• 제48권2호
• /
• pp.136-153
• /
• 2020

In this paper, the influence of initial formaldehyde/urea (F/U) molar ratios on the performance of low molar ratio (1.0) urea-formaldehyde (UF) resin adhesives has been investigated. Two initial F/U molar ratios, i.e., the first and second initial molar ratios were used for the alkaline addition reaction. Three levels of the first initial F/U molar ratios (2.0, 3.0, and 4.0) and two levels of the second initial molar ratios (2.0 and 1.7) were employed to prepare a total of six UF resins with an identical final molar ratio (1.0). The basis properties, functional groups, molecular weight, crystallinity, and thermal curing properties of the UF resins were characterized in detail. Higher levels (3.0 and 4.0) of the first initial F/U molar ratio provided the UF resins with better properties (non-volatile solids content, viscosity, gelation time, pH, and specific gravity) than those of the resins prepared with the conventional level F/U molar ratio of 2.0. Statistical analysis suggested that combining the first and second initial molar ratio of 4.0 with 1.7 would result in UF resins with greater adhesion strength and lower formaldehyde emission than those of the resins prepared with other molar ratios. The results showed that higher levels of the first initial molar ratio resulted in a more branched structure, as indicated by GPC, FTIR, DSC, XRD, and greater adhesion strength than those of the other UF resins with an identical final molar ratio of 1.0.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 가을 학술발표회 논문집
• /
• pp.769-774
• /
• 2002

In this study, methyl methacrylate (MMA)- modified polyester polymer concrete, in which the MMA was added to the unsaturated polyester resin, was developed for improving the early-age strength and the workability of the conventional polymer concrete, binder of which was the unsaturated polyester resin. Then the fundamental properties of the polymer concrete such as workability and strength were surveyed. The experimental results showed that the workability was remarkably improved as the MMA contents increased, and the filler-binder ratio was turned out to be important factor for the workability. Slump prediction equation was derived by the regression analysis based on MMA content and filler-binder ratio. Furthermore, early-age strength was greater when the MMA content were increased in the range of 20-40 % but the strength rather showed a tendency of decrease when the MMA content was 50 %.

• 한국생산제조학회지
• /
• 제19권1호
• /
• pp.140-144
• /
• 2010

In recent years there has been a growing interest for the use of natural fibers in composite applications due to their low cost, environmental friendliness, and good mechanical properties. The purpose of this study is to determine the characteristic of bending strength on bamboo fiber reinforced polymer composites. The parameters of RTM process depend on the weight ratio of bamboo fiber and resin, the number of bamboo ply and amount of hardening agent. Besides the existence of pore in composites according to vacuum time investigated a effect on mechanical properties of reinforced polymer composites. Test result shows that compressive strength was a maximum(approximately 1,840kgf/$cm^2$) value when weight ratio of resin was 12%.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 춘계학술발표대회 논문집
• /
• pp.257-260
• /
• 2005

Graphite reinforced conductive polymer composites were fabricated by the compression molding technique. Graphite powder was mixed with an phenol resin to impart electrical property in composites. The ratio and particle size of graphite powder were varied to investigate electrical conductivity of cured composites. In this study, graphite reinforced conductive polymer composites with high filler loadings(>66wt.%) were manufactured to accomplish high electrical conductivity. With increasing the loading ratio of graphite powder, the electrical conductivity and flexural strength increased. However. above 80wt.% filler loadings, flexural strength decreased due to lack of resin. Regardless of graphite particle size, electrical conductivity wasn’t varied. On the other hand, with decreasing particle size, flexural strength increased due to high specific surface area.

• 한국가구학회지
• /
• 제16권1호
• /
• pp.1-8
• /
• 2005

This experiment was carried out to investigate the gluing characteristics of poly vinyl acetate emulsion adhesive(PVAc) on the Cryptomeria japonica laminated boards. This sample trees are major planting species and have been planted in southern district for a long time. The optimum gluing conditions for laminated board were summarized as follows; the amount of spreading glue, assembly time, clamping pressure, and clamping time for PVAc resin were $200g/m^2$, 10min., $5kg/cm^2$, and 6hrs., respectively, and the relative formulae between extension ratio(x) and block shear strength(y) was $y=-9.6x+85.2(R^2=0.95)$.

• 전자공학회논문지A
• /
• 제33A권12호
• /
• pp.33-38
• /
• 1996

In this paper, we modeled the complex dielectric constant and analyzed the projpagation characteristics of a FR-4 composite substrate with different compositions. From the wideband dielectric modeling and the propagation loss analysis of FR-4 composites that consists of FR-4 resin and E-glass reinforcement,we have found that the propagation loss and velocity increase with the volume fraction of FR-4 resin above 1 GHz. These results are helpful in determining to deisgn optimum substrate composition ratio and cross-sectional geometry of high-speed and high-density transmission line.