• International Journal of Automotive Technology
• /
• 제6권6호
• /
• pp.665-670
• /
• 2005

Nanocomposites of polypropylene with organically modified clays were compounded on a twin-screw extruder by two-step melt compounding of three components, i.e., polypropylene, maleic anhydride grafted polypropylene (PP-g-MA), and organically modified clay. The effect of PP-g-MA compatibilizers, including PH-200, Epolene-43, Polybond-3002, Polybond-3200, with a wide range of maleic anhydride (MA) content and molecular weight was examined. Morphologies of nanocomposites and their mechanical properties such as stiffness, strength, and impact resistance were investigated. X-ray diffraction patterns showed that the dispersion morphology of clay particles seemed to be determined in the first compounding step and the further dispersion of clays didn't occur in the second compounding step. As the ratio of PP-g-MA to clay increased, the clay particles were dispersed more uniformly in the matrix resin. As the dispersibility of clays was enhanced, the reinforcement effect of the clays increased, however impact resistance decreased.

• 한국가시화정보학회지
• /
• 제12권1호
• /
• pp.49-53
• /
• 2014

In this study, a novel FDR-SPC is first synthesized in this study. The drag reducing functional radical such as PEGMA (Poly(ethylene) glycol methacrylate) has been utilized to participate in the synthesis process of the SPC. The types of the baseline SPC monomers, the molecular weight and the mole fraction of PEGMA were varied in the synthesis process. The resulting SPCs were coated to the substrate plates for the subsequent hydrodynamic test for skin friction measurement. In a low-Reynolds number flow measurement using PIV (Particle Image Velocimeter), a significant reduction in Reynolds stress was observed in a range of specimen, with the maximum drag reduction being 15.9% relative to the smooth surface.

• 대한화장품학회:학술대회논문집
• /
• 대한화장품학회 2003년도 IFSCC Conference Proceeding Book I
• /
• pp.1-12
• /
• 2003

Instead of sensory evaluation, we designed an evaluation method of the setting function of hairstyling products, based on an original theory focusing on changes in bending stress observed when a load with continuous bending is applied to human hair. Specifically, we developed a device to measure bending stress to quickly and objectively evaluate the condition of human hair, particularly its dynamic properties such as the setting function, following the application of hairstyling products. This device generates a load with continuous bending while applying a pendulum motion to a hair tress, one end of which is anchored. The setting function and holding power of resins of various molecular weight and ionic properties were evaluated using this device. The results demonstrated a close correlation with those obtained by experts' sensory evaluation. The evaluation results of bending stress and holding rate confirmed that the combined use of two different resins could improve the function of setting preparations. Evaluation using this device was able to substitute for sensory evaluation, and offers quick objective evaluation and detection of changes in the holding power of hairstyling products over time. We conclude that evaluation using this device is a promising new method.

• 한국재료학회지
• /
• 제20권12호
• /
• pp.681-685
• /
• 2010

The application of flip chip technology has been growing with the trend of miniaturization of electronic packages, especially in mobile electronics. Currently, several types of adhesive are used for flip chip bonding and these adhesives require some special properties; they must be solvent-free and fast curing and must ensure joint reliability against thermal fatigue and humidity. In this study, imidazole and its derivatives were added as curing catalysts to epoxy resin and their effects on the adhesive properties were investigated. Non-isothermal DSC analyses showed that the curing temperatures and the heat of reaction were dependent primarily on the type of catalyst. Isothermal dielectric analyses showed that the curing time was dependent on the amount of catalysts added as well as their type. The die shear strength increased with the increase of catalyst content while the Tg decreased. From this study, imidazole catalysts with low molecular weight are expected to be beneficial for snap curing and high adhesion strength for flip chip bonding applications.

• 한국응용과학기술학회지
• /
• 제18권3호
• /
• pp.241-247
• /
• 2001

Aqueous urethane dispersion resin begins to assume commercial importance due to increasing environmental awareness of VOC in coating industry. Moreover there have been strong industrial needs for the development of reactive-type polyurethane flame retardant coatings. In this study, chlorinated polyester polyols were synthesized by two step polycondensation reaction using mono chloroacetic acid, adipic acid, trimethylol propane, and 1,4-butanediol. In the next step polyurethane dispersion was prepared using these chlorinated polyester polyols and isophorone diisocyanate with dimethylol propionic acid(DMPA) and trimethylamine. The structure of chlorinated polyol was characterized by GPC, FT-IR and NMR. Particle size and its distribution were examined in terms of various dispersion parameters including molecular weight and composition of polyol, amount of DMPA, and NCO/OH ratio, etc. The effect of chlorinated polyols on flammability was also evaluated.

• Korea-Australia Rheology Journal
• /
• 제17권3호
• /
• pp.125-130
• /
• 2005

Coalescence process of binary immiscible fluid mixtures having bimodal size distributions, prepared by mixing two pre-sheared samples at different shear rates, ${\gamma}_{pre1}\;and\;{\gamma}_{pre2}$, under shear flow at a final shear rate, ${\gamma}_f$, are examined by transient shear stress measurements and microscopic observations in comparison with the results for simply pre-sheared samples having narrow size distributions (unimodal distribution samples). Component fluids are a silicone oil (PDMS) and a hydrocarbon-formaldehyde resin (Genelite) and their viscosities are 14.1 and 21.0 $pa{\cdot}sec$ at room temperature $(ca.\;20^{\circ}C)$, respectively. The weight ratio of PDMS: Genelite was 7:3. Three cases, $({\gamma}_{pre1}=7.2sec^{-1},\;{\gamma}_{pre2}=12.0sec^{-1}\;and\;{\gamma}_f=2.4sec^{-1}),\;({\gamma}_{pre1}=0.8sec^{-1},\;{\gamma}_{pre2}=4.0sec^{-1}\;and\;{\gamma}_f=2.4sec^{-1}),\;and\;({\gamma}_{pre1}=7.2sec^{-1},\;{\gamma}_{pre2}=12.0^sec^{-1}\;and\;{\gamma}_f=7.2sec^{-1})$ the first case, transient shear stress did not show any significant difference but domains larger than the initial state are observed at short times. In the latter cases, there exist undershoot of shear stress, reflecting existence of deformed large domains, which is confirmed by the direct observation. It is concluded that coalescence between large and small domains more frequently occur than coalescence between the domains with similar size in the bimodal distribution samples.

• 마이크로전자및패키징학회지
• /
• 제28권2호
• /
• pp.51-57
• /
• 2021

이 연구에서는 에폭시 수지에 포함된 나노 실리카 입자의 농도가 재료의 열/기계적 물성에 미치는 영향에 대해 알아보았다. 약 12 nm 크기의 나노 입자를 에폭시 수지에 다섯가지 무게비로 섞은 나노복합소재를 제작하였다. DMA와 TMA 방법을 이용하여 유리전이온도, 응력이완, 열팽창 거동을 측정하였다. 이를 통해 나노입자가 재료의 점탄성 거동에 어떠한 영향을 미치는지 보였다. 실리카 입자의 함량이 증가할수록 순수 에폭시 재료 대비 탄성 물성은 증가하였고, 유리전이온도는 감소하였다. FTIR 결과는 분자구조의 관점에서 충진제 함량에 따른 물성변화의 원인을 찾고 나노입자가 에폭시 분자 구조에 어떠한 영향을 미치는지를 규명하는데 중요한 역할을 하였다.

• 접착 및 계면
• /
• 제24권4호
• /
• pp.124-130
• /
• 2023

외부 온도 변화에 따른 특성변화가 적어야 하는 자동차 부품용 코팅제는 외부 환경 변화에 의한 노이즈 특성 변화가 매우 중요하다. 이에 내한성, 내후성, 내마모성이 우수한 연질의 폴리우레탄과 하이드록시 말단 혹은 곁사슬이 아민으로 변성된 폴리실록산 등이 널리 사용되고 있다. 본 연구에서는 각각의 폴리머 성분들이 노이즈에 미치는 영향을 확인하기 위하여 수분산 폴리우레탄을 합성하였고, 폴리실록산, ultra high molecular polypropylene (UHMWPP) 분말, 카본블랙, 소광제를 첨가하여 코팅제를 제조하였다. 수분산 폴리우레탄의 hard/soft 세그먼트의 함량을 27.1%/72.9%, 아민으로 변성된 폴리실록산과 하이드록시 말단 폴리실록산이 2:7의 비율에서 노이즈의 발생이 가장 적었으며, 마찰자가 고속에서 움직일 때 마찰계수의 차이가 컸다. 또한 SiO₂를 UHMWPP 분말로 대체함으로써, 노이즈가 감소하였으며 광택도 또한 감소하였다.

• 대한바이러스학회지
• /
• 제28권3호
• /
• pp.215-224
• /
• 1998

Cloning, sequencing and expressing in E. coli of the thymidine kinase (TK) gene of Herpes simplex virus type-1 (HSV-1) strain F was investigated. The TK gene, located in the BamHI 3.74 kb DNA fragment of the plasmid pHLA-12, was amplified by polymerase chain reaction (PCR). The 1,131 kb PCR product was cloned into the BamHI and EcoRI sites of pBacPAK9 plasmid and then named pBac-TK recombinant. The TK gene was subcloned into the BamHI and BglII sites of pQE-30, and named pQE-TK recombinant. The nucleotide sequence of the 1,131 kb TK gene was determined, and the GC content was 65.13%. There were deduced 367 amino acid residues with a total molecular weight of 43 kDa. The weight was confirmed by the protein produced by E. coli M15/pQE-TK on the SDS-PAGE and Western blot. The production of the TK protein in the IPTG induced cells was measured over 4 h. At the end of 1, 2 and 3 h the level increased by 146, 204 and 242%, respectively. The amount of the protein at the highest fraction purified with Ni-NTA resin chromatography was $0.68\;{\mu}g$ per ml. The soluble state TK protein was present in the cytoplasm. In these results the F strain was different in base sequence and amino acid sequence from that of the CL101 strain, which caused difference in their strains.

• Korean Chemical Engineering Research
• /
• 제50권3호
• /
• pp.442-448
• /
• 2012

폐 플라스틱을 이용한 연료유 생산 공정을 위한 폴리프로필렌(PP) 수지에 대한 열분해 반응 실험을 하였다. 질소 분위기에서 상온에서 $650^{\circ}C$ 까지의 비등온 조건에서의 열분석기와 $420^{\circ}C$ 등온에서의 Pyrolyser GC-mass 분석기, $420^{\circ}C$의 배치형 반응기에서 무촉매반응과 천연제올라이트, 폐 FCC 촉매, ZSM-5 등의 제올라이트 계 촉매를 사용한 열분해 실험이 행하여졌다. TGA 실험에서 PP 수지의 열분해반응은 $330^{\circ}C$ 부근에서 시작되어, $497^{\circ}C$에서 완결되었다. 촉매반응에서 제올라이트 계열 촉매는 폐 FCC 촉매> 천연제올라이트> ZSM-5> PP의 순으로 열분해 반응속도를 높이는데 유효하였다. 열분해가 완료되는 온도도 폐 FCC 촉매 첨가 시 가장 낮게 나타났다. PY-G.C. mass 실험에서 PP 수지 만의 경우에서보다 촉매가 첨가됨에 따라 탄소 수가 낮은 생성물이 생성되는 것을 알 수 있었다. ZSM-5 촉매나 폐 FCC 촉매 첨가 시 특히 낮은 탄소 수의 생성물이 많이 생성되었다. 회분식 반응기에서 초기 오일생성율은 폐 FCC 촉매 첨가시 가장 높지만, 최종 오일전환율은 천연제올라이트 첨가 시가 폐 FCC 촉매 첨가 시보다 2% 정도 높았다. 탄소분석에서도 폐 FCC 촉매 첨가가 경유 성분이 주성분으로 요구되는 연료유 제조에 우수 하였다.