• Ecology and Resilient Infrastructure
• /
• v.3 no.3
• /
• pp.207-211
• /
• 2016

This study focuses on the categorization of the phenomenon of vegetative recruitment on riparian channels, so called, the phenomenon from "white river" to "green river", and proposes for the corresponding research direction. According to the literature review and research outputs obtained from the authors' previous research performed in Korea within a limited scope, the necessary and sufficient conditions for the recruitment and retrogression of riparian vegetation may be the mechanical disturbance (riverbed tractive stress), soil moisture (groundwater level, topography, composition of riverbed material, precipitation etc.), period of submergence, extreme weather, and nutrient inflow. In this study, two categories, one for the reduction in spring flood due to the change in spring precipitation pattern in unregulated rivers and the other for the increase in nutrient inflow into streams, both of which were partially proved, have been added in the categorization of the vegetative recruitment and retrogression on the riparian channels. In order to scientifically investigate further the phenomenon of the riparian vegetative recruitment and retrogression and develop the working riparian vegetative models, it is necessary to conduct a systematic nationwide survey on the "white to green" rivers, establishment of the categorization of the vegetation recruitment and retrogression based on the proof of those hypotheses and detailed categorization, development of the working mathematical models for the dynamic riparian vegetative recruitment and retrogression, and adaptive management for the river changes.

• Journal of Sericultural and Entomological Science
• /
• v.51 no.1
• /
• pp.68-72
• /
• 2013

Fibroin and sericin are natural proteins obtained from cocoon and one of the spotlight materials for medical device. Medical device made of these proteins also has the advantage that this material is biodegradable in to amino acid. In this study, we prepared silk sponges using fibroin, sericin and additives. The characterizations of the silk sponges such as morphology, stability, and blood absorbency were observed. The structural stability of the silk sponge decreased significantly by increasing sericin contents. The effect on the concentrations of ethanol to induce crystallization was observed to be superior to 70% ethanol. Structural stability of silk sponges containing additives was very lower than those not containing additives. The blood absorbency of the silk sponges was found to be excellent, regardless of the composition of sericin and fibroin. The resilient power of these sponges was also very good, in spite of the repeated soaking and drying. Therefore, we expect that the silk sponges can be used medical supplies such as plastic implants and hemostatic cotton.

• International Journal of Highway Engineering
• /
• v.3 no.3 s.9
• /
• pp.119-133
• /
• 2001

The stiffness of chemcrete modified asphalt mixtures increase rapidly with time in the presence f oxygen and high temperature, Sometimes the asphalt pavements that have chemcrete modified asphalt mixture applied on the surface none show premature cracking because of the excessive increase in the stiffness f the asphalt mixtures. To mitigate this premature cracking, the chemcrete modified mixtures have been used as a base course material. In this study, the performance of the chemcrete modified asphalt binder and mixtures are investigated through a course of various laboratory tests including dynamic shear rheometer and bending beam rheometer tests for binders and uniaxial tensile fatigue, wheel tracking, and moisture damage tests for the mixtures. And also the resilient modulus of the conventional and chemcrete modified mixtures are compared based on the test results conducted on the specimens obtained from various in-situ test sections. It can be concluded from the tests results that the chemcrete modified mixtures show better rutting resistance than conventional mixtures. The chemcrete modified mixtures may have low temperature cracking when it is applied in the cold region. The stiffness of chemcrete modified mixtures is approximately 50 percent higher than that of conventional mixtures more than two years after the chemcrete modified mixture was applied in the base course.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.6
• /
• pp.261-271
• /
• 2003

A condition evaluation procedure for the pavement foundations using multi-load level Falling Weight Deflectometer(FWD) deflections is presented in this paper. A dynamic finite element program incorporating a stress-dependent material model, was used to generate the synthetic deflection database. Based on this synthetic database, the relationships between surface deflections and critical responses, such as stresses and strains in base and subgrade layers, have been established. FWD deflection data, Dynamic Cone Penetrometer(UP) data, and repeated load resilient modulus testing results used in developing this procedure were collected from the Long Term Pavement Performance (LTPP) and North Carolina Department of Transportation (NCDOT) database. Research effort focused on investigation of the effect of the FWD load level on the condition evaluation procedures. The results indicate that the proposed procedure can estimate the pavement foundation conditions. It is also found that structurally adjusted Base Damage Index (BDI) and Base Curvature Index (BCI) are good indicators for the prediction of stiffness characteristics of aggregate base and subgrade respectively. A FWD test with a load of 66.7 kN or less does not improve the accuracy of this procedure. Results from the study for the nonlinear behavior of a pavement foundations indicate that the deflection ratio obtained from multi-load level deflections can predict the type and quality of the pavement foundation materials.

• The Journal of Korean Academy of Prosthodontics
• /
• v.42 no.4
• /
• pp.397-411
• /
• 2004

Purpose: The purpose of this study was to determine the effect of anchorage systems and palatal coverage of denture base on load transfer in maxillary implant-supported overdenture. Material and methods: Maxillary implant -supported overdentures in which 4 implants were placed in the anterior region of edentulous maxilla were fabricated, and stress distribution patterns in implant supporting bone in the case of unilateral vertical loading on maxillary right first molar were compared with each other depending on various types of anchorage system and palatal coverage extent of denture base using three-dimensional photoelastic stress analysis. Two photoelastic overdenture models were fabricated in each anchorage system to compare with the palatal coverage extent of denture base, as a result we got eight models : Hader bar using clips(type 1), cantilevered Hader bar using clips(type 2), Hader bar using clip and ERA attachments(type 3), cantilevered milled-bar using swivel-latchs and frictional pins(type 4). Result: 1. In all experimental models, the highest stress was concentrated on the most distal implant supporting bone on loaded side. 2. In every experimental models with or without palatal coverage of denture base, maximum fringe orders on the distal ipsilateral implant supporting bone in an ascending order is as follows; type 3, type 1, type 4, and type 2. 3. Each implants showed compressive stresses in all experimental models with palatal coverage of denture base, but in the case of those without palatal coverage of denture base, tensile stresses were observed in the distal contralateral implant supporting bone. 4. In all anchorage system without palatal coverage of denture base, higher stresses were concentrated on the most distal implant supporting bone on loaded side. 5. The type of anchorage system affected in load transfer more than palatal coverage extent of the denture base. Conclusion: To the results mentioned above, in the case of patients with unfavorable biomechanical conditions such as not sufficient number of supporting implants, short length of the implant, and poor bone quality, selecting a resilient type attachment or minimizing the distal cantilevered bar is considered to be an appropriate method to prevent overloading on implants by reducing cantilever effect and gaining more support from the distal residual ridge.

• Ecology and Resilient Infrastructure
• /
• v.5 no.3
• /
• pp.180-188
• /
• 2018

Biopolymer based on microbial ${\beta}$-glucan and xanthan gum is a rising geotechnical material that can enhance the cohesion between soil particles and consequently reduce soil erosion. Recently, biopolymer is proposed to utilize for the riverbank strengthening. As an effort of the ecological assessment of biopolymer application in civil engineering, this study examined the effects of biopolymer on seed germination and growth of nine plant species inhabiting in the Korean riverside. Responses of above-ground growth to the biopolymer differed among plant species. One species grew less but others maintained their growth when plants were grown in the soil with biopolymer. In contrast, root grew more vigorously and root/shoot ratio decreased in the biopolymer across testing plant species. These results indicate that biopolymer application on the river bank likely stimulate root growth of native plant species, which, in turn, possibly reinforces riverbank. Species specific responses of above-ground growth implies that ecological effects of biopolymer application would depend on the species composition of the ecosystem.

• International Journal of Highway Engineering
• /
• v.8 no.2 s.28
• /
• pp.23-30
• /
• 2006

Emulsified Asphalt Mixture(EAM) is more environmentally-friendly and cost-effective than typical Hot Mix Asphalt (HMA) because EAM does not produce carcinogenic substances, e.g., naphtha, kerosene, during the both of manufacturing and roadway construction process. Also, it does not require heating the aggregates and asphalt binder. However, EAM has some disadvantages. Generally EAM has a less load bearing capacity and more moisture susceptibility than conventional HMA. The study evaluated a Fiber modified EAM (FEAM) to increase load bearing capacity and to decrease moisture susceptibility of EAM. Modified Marshall mix design was developed to find Optimum Emulsion Contents (OEC), Optimum Water Contents (OWC), and Optimum Fiber Contents (OFC). A series of test were performed on the fabricated specimen with OBC, OWC, and OFC. Tests include Marshall Stability, Indirect Tensile Strength, and Resilient modulus test. Comparison analyses were performed among EAM, Fiber modified EAM (FEAM), and typical HMA to verify the applicability of EAM and FEAM in the field. Test results indicated that both of EAM and FEAM have an enough capability to resist medium traffic volume based on the Marshall mix design criteria. Also the study found that fiber modification is effective to increase the load bearing capacity and moisture damage resistance of EAM.

• Ecology and Resilient Infrastructure
• /
• v.3 no.2
• /
• pp.100-109
• /
• 2016

Low impact development (LID) facilities are established for the purpose of restoring the natural hydrologic cycle as well as the removal of pollutants from stormwater runoff. Improved efficiency of LID facilities can be obtained through the optimized interaction of their major components (i.e., plant, soil, filter media, microorganisms, etc.). Therefore, this study was performed to evaluate the performances of LID facilities in terms of runoff and pollutant reduction and also to provide an optimal maintenance method. The monitoring was conducted on four LID technologies (e.g., bioretention, small wetlands, rain garden and tree box filter). The optimal SA/CA (facility surface area / catchment area) ratio for runoff reduction greater than 40% is determined to be 1 - 5%. Since runoff reduction affects the pollutant removal efficiency in LID facilities, SA/CA ratio is derived as an important factor in designing LID facilities. The LID facilities that are found to be effective in reducing stormwater runoff are in the following order: rain garden > tree box filter > bioretention> small wetland. Meanwhile, in terms of removal of particulate matter (TSS), the effectiveness of the facilities are in the following order: rain garden > tree box filter > small wetland > bioretention; rain gardens > tree box filter > bioretention > small wetland were determined for the removal of organic matter (COD, TOC), nutrients (TN, TP) and heavy metals (Cu, Pb, Cd, Zn). These results can be used as an important material for the design of LID facilities in runoff volume and pollutant reduction.

• Ecology and Resilient Infrastructure
• /
• v.5 no.1
• /
• pp.19-24
• /
• 2018

Water quality is affected by the pollutants flowing into rivers since the interaction between water bodies and sediments in various environmental conditions. Especially, accumulation of sediments increases in the stagnant water areas due to a relative long hydrological retention time in the water bodies. Therefore, it is an important factor of water quality to understand characterization of the material behavior in water bodies and sediments. In this study, the objective of the conditional experiments was small and medium sized streams located in Gyeonggi-do. To estimate how the changes of fluoride behavior, depending on the pH, ion type, concentration, and clay contents. The pH results showed a trend that adsorption amount of fluorine decreased and the dissolution of fluorine increased following by pH increasing. The concentration and type of ions results showed that $Cl^-$ and $SO{_4}^{2-}$ ions had no significant effect on the adsorption ability of fluorine, the amount of dissolution was increased because $OH^-$ ion had active competition with fluorine in the reaction. The ingredient of sediment results showed that the amounts of fluoride adsorption and dissolution were reduced in samples, which contain relatively large amounts of Silt and Clay components. This means that the environmental conditions of water bodies greatly affect the adsorption and dissolution of fluoride in the sediments, so that proper management of fluoride in the sediments must precede an understanding of the environmental conditions of the water bodies.

• Ecology and Resilient Infrastructure
• /
• v.6 no.4
• /
• pp.227-235
• /
• 2019

This study monitored Daecheong 1-bo, Daecheong-stream, which carried out the project in 2014, from 2015 to 2016. The technology applied to the stream was evaluated using Periphytic Algae to check contamination indicators and ecological health of the area with an integral river-bed protection using non-toxic materials. The water quality of the monitoring section was confirmed to be above the river environment standard (II), and it was confirmed that the Saproxenic taxa of the river bed protection were higher than the upper and downstream sections. The TDI, which is an index of attachment algae, was shown in the average 51.03 and 52.15 for the pilot project sections in 2015 and 2016, confirming that the index is of the "normal" grade. This is the other sections in the upstream and downstream sections showed higher than "bad", which is thought to have a positive effect on the habitat of the river ecosystem components, especially the microbial population in river bed protection.