• Journal of the Korean Wood Science and Technology
• /
• v.34 no.2
• /
• pp.83-87
• /
• 2006

The leaves of Paulownia coreana Uyeki were extracted with acetone-$H_2O$ (7:3, v/v), concentrated under reduced pressure and fractionated successively with n-hexane, methylene chloride and ethyl acetate, leaving residual water soluble fraction. A portion of the resulting aqueous soluble powder was chromatographed on a Sephadex LH-20 column using aqueous methanol and ethanol-hexane as washing solvents. Three apigenin derivatives were isolated and identified as apigenin-7-O-${\beta}$-D-glucpyranoside, apigenin-7-O-${\beta}$-D-glucuronopyranoside and apigenin-7-O-[${\beta}$-D-glucuronopyranosyl($1{\rightarrow}2$)-O-${\beta}$-D-glucuronopyranoside] by spectroscopic methods including NMR and FAB-MS.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.968-971
• /
• 2017

In this study, manufacturing the Single Base propellant using a Nitroguanidine(NGD A%, NGD-B%, 2A=B). The Factors affecting the combustion rate are Moisture and Volatiles, Residual Solvents, Dimension. These Factors were analyzed and compared. Also, NGD-A% propellants and NGD-B% propellants were compared with firing test Test. As a result, NGD-A% was confirmed to have a higher speed at a similar pressure than NGD-B% propellants.

• KSBB Journal
• /
• v.21 no.1 s.96
• /
• pp.1-10
• /
• 2006

The recovery and purification of a paclitaxel from plant cell cultures is essential to commercial process. This review describes a large-scale recovery and purification method for producing paclitaxel, to guarantee high purity and yield from plant cell cultures. Also, the process of separation and purification is optimized in conjunction with a extraction step, pre-purification, purification, and polishing (drying) as an integrated process to meet final product quality requirements such as purity, residual solvents, product morphologies, impurities, bacterial endotoxin, etc. This information is very useful for production and quality control of pharmaceuticals in commercialization step.

• KSBB Journal
• /
• v.15 no.5
• /
• pp.529-536
• /
• 2000

Results from experiments and mathematical modeling were compared for pervaporative butanol fermentation. The developed model includes expressions to predict characteristics of butanol fermentation, such as, microbial growth, solvent (butanol, acetone, and ethanol) formation and organic acid (acetate and butyrate) production. Butanol diffusivity was 1.15${\times}$10(sup)-7 ㎡/hr at 1.5 L/min-tubing of air flow rate using a pervaporative module. The model correlated well with experimental results (cell growth, glucose consumption and concentrations of solvents and organic acids) for batch fermentation with and without pervaporation. Larger surface area and thinner module tubing resulted in an increased glucose consumption and a decreased residual butanol concentration. Optimum membrane area and thickness were 0.34 ㎡ and 120 $\mu\textrm{m}$, respectively.

• Journal of Fashion Business
• /
• v.13 no.3
• /
• pp.109-117
• /
• 2009

To set up the outstanding and scientific dyeing method in making the condensed liquid of pigment obtained from onion skins and the improved reliability, the following basic experiments were performed. The pigment was extracted in the distilled water at $70^{\circ}C$ and methanol at room temperature and then it was analyzed with LC/MS/MS system (Liquid Chomatography/Mass Spectroscopy/Mass Spectroscophy, LIQ Advantage Max, Thermo Finnigan, USA) for its pigmental characteristics. The unrefined silk and refined silk were dyed by making use of the derived pigment in such a way. The chromameter (CR-200, Minolta, Japan) was used to measure the change in surface color in textiles to be dyed by the extracting condition and the color difference ${\Delta}E$ was determined according to the color difference formula CIE LAB through measuring the psychometric lightness L* and chromaticity coordinates a* and b*.

• Bulletin of the Korean Chemical Society
• /
• v.21 no.6
• /
• pp.557-561
• /
• 2000

Various enaryloxynitriles-terminated reactive polymer precursors containing rigid aromatic units were prepared from various diamines and 1-(p-formylphenyl)-1-phenyl-2,2-dicyanoethene (1). Arylate end-capped model compounds linked with azomethine bond were also prepared by reacting p-formylphenyl benzoate with diamines to compare the curing ability. The oligomers were highly soluble in polar aprotic solvents such as N,N-dimethylformamide, dimethylsulfoxide and N-methyl-2 -pyrrolidinone. They generally showed an exothermic curing process between $280-350^{\circ}C$, attributable to the thermal crosslinking of the dicyanovinyl group in DSC analysis, and no weight loss at curing temperature. Upon heating the polymer precursors, heat-resistant and insoluble network polymers were obtained. Thermogravimetric analyses of the precursors containing rigid aromatic units showed thermal stability with a 77-92% residual weight at $500^{\circ}C$ under nitrogen.

• Bulletin of the Korean Chemical Society
• /
• v.19 no.3
• /
• pp.291-295
• /
• 1998

Various enaminonitriles-terminated reactive polymer precursors containing rigid aromatic and flexible alkyl units were prepared from the corresponding diamines and 1-chloro-1-phenyl-2,2-dicyanoethene (1). All the enaminonitriles-terminated precursors were characterized by spectroscopies and elemental analysis. They were highly soluble in DMF and NMP, and partially soluble in common organic solvents such as THF and acetone. They showed a large exotherm around 350 ℃ attributable to the thermal polymerization by crosslinking of the dicyanovinyl group. Upon heating the precursors, heat-resistant and insoluble network polymers were obtained. Thermogravimetric analyses of the precursors containing rigid aromatic moiety exhibited thermal stability with a 10% weight loss around 420-480 ℃ and 75-88% residual weight at 500 ℃ under nitrogen.

• Bulletin of the Korean Chemical Society
• /
• v.18 no.3
• /
• pp.328-333
• /
• 1997

Dicyanovinyl-containing bis-hydroxy monomers, p-bis[1-(4-hydroxypiperidinyl)]-2,2-dicyanovinyl]benzene (2), p-bis[1-[1-(2-hydroxyethyl)piperazinyl]-2,2-dicyanovinyl]benzene (3), p-bis[1-(4-hydroxyphenylamino)-2,2-dicyanovinyl]benzene (4) and p-bis[1-[N-methyl-(N-hydroxyethyl)amino]]-2,2-dicyanovinyl]benzene (5) were prepared from p-bis(1-chloro-2,2-dicyanovinyl)benzene (1) and the corresponding amino alcohol. The poly(enaminonitriles-ester)s with a variety of chemical structures in the main chain were prepared from them. The chemical structure of polymers was confirmed through the syntheses of their corresponding model compounds. The polymers are easily soluble in polar aprotic solvents such as DMF, DMSO and NMP. Brittle and hard films can be cast from DMF solutions of polymers. Most polymers showed a large exotherm in DSC analyses and undergo a curing reaction around 350 ℃ to form insoluble materials. The polymers consisting of rigid aromatic moieties show 80-88% residual weight at 500 ℃ under nitrogen.

• Applied Biological Chemistry
• /
• v.45 no.2
• /
• pp.77-83
• /
• 2002

Effects of ethoxyquin on the color stability of oleoresin paprika extracts and amount of residual ethoxyquin, a color stabilizer, in commercial extracts were determined. The oleoresin paprika extracts dissolved in ethanol gave the highest maximum photo-absorbency at 444-458 nm, with the color index of United States product 2-6 times higher than that produced in India. The residual solvents in oleoresin paprika extracts were mainly acetone and methanol, although some other extracts also contained small amounts of hexane. HPLC analysis was determined as a proper analytical method for residual ethoxyquin assay in the oleoresin paprika extracts, particularly when hexane was used as a solvent. The residual ethoxyquins were detected in the extracts produced in US and Spain which had relatively high color indices.

• Clean Technology
• /
• v.16 no.2
• /
• pp.103-116
• /
• 2010

It has been reported that the LCD panel market in the FPD industry is become growing and its panel size and production capacity are increasing, and its manufacturing technique is improved every year. FPD manufacturing process requires high cleanliness in its overall process. Especially, FPD cleaning process which accounts for 30~40% of total manufacturing process is very important in its technological and productivity aspects. It is difficult to remove residual liquid-crystal in the fine gap after liquid-crystal injection process in the cell. In this study, aqueous cleaning agents with excellent cleaning, rinsing, and penetrating abilities, but minimum ion content for LCD panel were formulated through mixing glycol ether-type and glycol dimethyl ether-type solvents and nonionic surfactants which are widely used as raw materials for alternative cleaning agents because of environmental regulation at home and abroad. And the formulated cleaning agents were applied to clean FPD liquid crystal after its injection in the cell. Physical properties, cleaning efficiencies, and rinsabilities of the formulated cleaning agents with different combination ratios of solvents, surfactants and additives were measured. As experimental results, the formulated cleaning agents showed higher wetting indices and cloud point than the traditional commercial cleaning agent. And it was found that cleaning efficiencies of the formulated cleaning agents were influenced by the structure of main solvents in them and the types of liquid crystal as soil for cleaning. The best cleaning agents among the formulated cleaning agents showed similar cleaning efficiencies and better rinsabilities compared to the conventional cleaning agent.